Search: safety ppe

The Bullard Clean Air Box (CAB) offers tried-and-true breathing air filtration and carbon monoxide monitoring.  Without the new features on the latest model AirGuard Breathing Air Box, they nonetheless provide required protection, and at a reduced cost.

With flexible configurations of 1, 2, 4, or 8 outlets at various capacities up to 100 CFM, the CAB Breathing Air Box can support small or large crews.  NOTE:  The actual number of personnel that any breathing air box can support is dictated by the box CFM capacity and the CFM requirements of their respirators, and NOT by the number of outlets on the box.  

While not required by breathing air standards, adding a dedicated Air Gladiator breathing air filter in-line before the box will extend the life of the more expensive filters inside the box.

• compatible with Bullard GenVX Blast Helmet Respirator
• SAR breathing tubes bridge the headpiece with the airline to supply clean air to the worker
• Recommended for operators 5’5″ and taller

MPN:  GVXBT

• Replacement threaded breathing air tube suited for the Bullard 88 Series WideSpan airfed helmet
• Includes an internal noise reduction piece
• Flexible to make it easier for the blaster to move
• Sold Individually
• Genuine Bullard parts

The T-Link Respirator is a robust and highly flexible solution for industrial painters, designed with safety in mind. The T-Link is one of the GVS / RPB family of loose-fitting respirators designed especially for coating applications.  These offer the following advantages over traditional close-fitting masks:

• Safer.  Much more protection from respiratory hazards, with an Assigned Protection Factor of 1000+, due to its positive pressure design. (The typical N95 masks rating is only 10)
• More User-Friendly.  Facial hair is OK – no need to be clean shaven.
• Saves time and money.  The hassles and expense of annual fit-testing are eliminated.
• More comfortable.  Several ventilation options available to keep operators productive during temperature extremes.

These RPB respirators are truly an investment in your people and are expected to improve employee retention. Configure your T-Link to meet your specific needs, as follows:

• Ventilation system choices:
  • Supplied Air / Constant Flow valve
  • Supplied Air / C40 Heat/Cool climate control
  • PAPR / PX5
  • PAPR / HX5
• Head suspension choices:
  • Bump Cap
  • Hard Hat
• Cape choices:
  • Tychem 2000 Full Hood
  • Tychem 4000 Full Hood w/Sealed Seams

In addition, T-Link respirators have optional performance-enhancing accessories available, as follows:

• Comms-Link™ In-Helmet Communication systems, which pair with your existing 2-way radios.
• Vision-Link™ In-Helmet Light, providing 650 lumens to help your operators do their best work.
• Quiet-Link™ Ear Muffs, in-helmet hearing protection – eliminates the concern about ear-plug compliance.
• Tear-Away (Peel-Off) lenses, both in economical singles and convenient cassette styles.

The T-Link from GVS / RPB is to painters what the Nova respirators are to blasters.  Not sure?  Contact us to discuss a trial.

BlastOne carries all the parts and accessories for the GVS / RPB respirators. This group includes all breathing tubes (aka breathing hoses) as well as the covers for both the supplied air and the PAPR versions, as follows:

• Nova 2000 SAR Breathing Air tube, legacy version with adapter, MPN: NV2021A
• Nova 3 & updated Nova 2000 SAR Breathing Tube, MPN: NV32021B (does not include adapter)
• T-Link, T200, Z4, & Z-Link SAR Breathing Air Hose, MPN: 04-833A (includes adapter for Z-Link & T-Link)

In addition to the above Supplied Air Respirator tubes, we have PAPR breathing tubes for all RPB products as well as breathing air tube covers.  

The Bullard Clean Air Box (CAB) Supplied Air filtration system can be easily maintained in the field.  Replacing the filter elements is a common requirement, and they are available as follows:

• In 3 different sizes, depending on the size of your unit:
  • 15/30 CFM size
  • 50 CFM size
  • 100 CFM size
• Available a la cart or in a kit of 3

Note:  Filter life can be extended by adding a Bullard Air Gladiator filter in-line before the CAB.

• Used to test Breathing Air for certification to Grade D Standard
• Does not include the sample tubes and containers, they are purchased individually as part of the testing and certification cost – See APAIRTESTD
• Also available for Rent – enquire.

Powerful Portable breathing air station with regulator

• 4 operators can use the one machine
• Not just a Carbon Monoxide monitor – this device actually removes CO, as well as odors, hydrocarbons, etc.
• Powered by two x 9 Volt batteries included
• Carbon Monoxide Monitors are normally mandated on most job sites

• Air inlet: 3/8″ NPT(f)
• Air outlets: (2 regulated) 1/4″ NPT (f) – 1 Each
• 3/8″ NPT(f) – 1 Each
• Air outlets: (2 unregulated) 1/4″ NPT(f) – 2 Each
• Air Capacity: 60 CFM
• Maximum Temp: 150° F
• Max. Inlet Pressure: 150 psi
• Regulator range: 0-125 psi

Quick-Connect (QC) fittings for breathing air hoses are a critical part of any breathing air system.  BlastOne stocks all types, including the following:

• Adapters.
  • Also known as Plugs, Coupler Plugs, or Male Ends
• Couplings.
  • Also known as Sockets or Female Ends

Note:  Both couplings and adapters are available with hose barb, female thread, or male threads.

This group is the ARO type used by GVS / RPB.  In addition a unique RZ fitting is available.  The RZ fitting is designed to prevent accidental hook-up of breathing air hose to other shop air hoses and is available only from GVS / RPB.

Ensure safe and reliable breathing air supply with Bullard Breathing Air Hoses, SKU: P-BLDEHOSE, from BlastOne. These OEM hoses, designed for both compressed air and free-air pump setups, offer versatility and durability for professional needs.

• Dual applications: Compressed Air (3/8″ ID) and Free Air (1/2″ ID).
• Starter and Extension Hose configurations.
• V5 Coiled/Kink-Free and V10/V20 Standard EPDM rubber hoses.
• Available in various colors and lengths, up to 300 feet.

Choose the right hose with compatible quick-disconnect fittings for your respiratory equipment.

Genuine OEM lenses (aka blast shields) help keep your Bullard 88 blast hood NIOSH compliant.  The details on the various versions of are as follows:

• Three Part Lens System includes:
  • Inner Lens. 
    • 40 mil, clear, oval
  • Outer Lens.  Available in the following variations:
    • 15 mil, clear, rectangular
    • 15 mil, clear, rectangular w/protective film on both sides of lens
    • 20 mil, clear, oval
    • 30 mil, smoke tint, oval
    • 40 mil, clear, oval
    • 42 mil, green tint, oval
  • Tear-off Lens.  Available in the following variations.
    • Perforated (Set of 5 individual tear-off lenses sealed together, saves time.)  Packed 5 perforated sets (25 total lenses) per package.
    • Adhesive backed (Individual tear-off lenses with adhesive strips.)  Packed 25 lenses per package.
• Packaging:
  • Available in single packs, or in case quantities at reduced pricing.

• Lenses designed to fit the Bullard 88 Blast Helmet
• Sold by the Pack
• Three Part Lense system
  • Inner Lens – Your thick eye protection layer
  • Outer Lens – Protects the more costly inner lens
  • Tear-off Lens – Allows you to tear it off and keep blasting

• Air Inlet Kit includes Male Threaded Inlet fitting, Screws and hand strap (NV3-729)
• Suits RPB Nova3 Blast Helmet
• Sold as a complete kit

Genuine Parts – Manufactured by RPB Safety

The RPB Breathing Air Hose, available for rent or purchase, is designed to ensure safety and compliance in high-pressure settings. Perfectly suited for RPB Nova 2000 and Nova 3 Blast Helmet setups, this certified breathing air hose features a non-toxic liner, a durable outer jacket, and is fitted with approved quick connect fittings, compliant with all international and NIOSH standards. Rated for up to 350 psi working pressure, this 3/8″ (10mm) ID bore hose offers reliable and safe performance for all your breathing air needs.

AVAILABLE FOR RENTAL OR PURCHASE

• Suits RPB Nova 2000 and Nova 3 Blast Helmet Set ups
• NIOSH requires that this breathing air hose is used with the Nova Helmets
• Certified Breathing Air Hose with non-toxic liner
• Complies with all international and NIOSH Standards
• 3/8″ (10 mm) ID bore.
• Fitted with approved breathing airline quick connect fittings.
• Rated up to 350 psi working pressure.
• Genuine Products – Manufactured by RPB Safety

Experience ultimate protection and organization with the BlastOne Premium BlasterAll® Helmet Bag, SKU: HLBABAG1. Crafted from robust 1000 denier Cordura®, this bag is not just for storing your respirator but also all your blasting essentials.

• Spacious main compartment for your respirator.
• Dedicated bottom compartment for spare lenses and blast suit.
• Convenient side compartment for tools and personal items.
• Versatile design, perfect as a sports or duffle bag.

A stylish, durable solution for keeping your equipment secure and accessible.

Step into the future of blasting helmets with the Bullard GVX Respirator.  With cutting-edge technology and design, it’s the lightest helmet in its class, offering unparalleled comfort and flexibility.

• Comfortable, lightweight design reducing neck strain.
• Premium suspension padding and cheek pads for a snug fit.
• Customizable airflow to minimize head-chill and visor fogging.
• Durable construction, engineered and manufactured in Kentucky, USA.
• Flexible options: Various capes, flow control valves, and airline fittings.

Available in four stylish colors, this NIOSH certified Type C and CE, Continuous Flow Class SAR sets the standard in professional blasting safety.

Breathing Air Filter Cartridge

• Suits Clemco AFC Breathing Air Filters (general mfr.)
• Replacement Air Filter Cartridge
• Air filter cartridges contain activated charcoal which means the unit must be changed every 3 months or 400 hours usage – whichever occurs first
• Carbon filter does not remove CO
• Sold Individually
• Commonly used for abrasive blasting/sandblasting operations
• Used for supplying breathing quality supplied air to sandblasting helmets/blast hoods

This Bullard breathing air tube assembly is the HAB20BT (MPN: 20BT).  This common replacement part connects the air supply line to the respirator.  Additional details as follows:

• Compatibility:  Bullard CC20, GR50, and RT models.
• Contains:  Urethane breathing air tube and hood clamp

Note:  This assembly does not include the climate control valve or nipple.

Z4 – The lightest-weight welding respirator in the world in its class!

The Z4® from GVS / RPB is designed to do one thing, and do it very well:  Provide comfortable protection while welding.  A few features:

• Superior comfort. 
  • Very light-weight – only 28.4 ounces with ADF and cape when equipped with standard head suspension
  • Dual air-distribution system, delivers 75% of air supply to breathing zone and 25% across the visor to prevent fogging.
  • Adjustable head suspension system ergonomically balanced to reduce fatigue
• Flip-up visor.  When up, the visor reveals the clear safety lens, maintaining respiratory protection during inspection, grinding, etc.
• High protection with the following ANSI approvals:
  • Hearing (S3.19) when used in conjuction with the Quiet-Slim™ earmuffs.  (See below in Options list.)
  • Eye and Face (Z87+)
  • Welding Eye (Z87w)
• Great optics!  Highest quality wide-view ADF lens available.  (Additional details available on brochure under documents tab.)

Multiple breathing options, cape configurations, and accessories are available, as shown below:

• Head Suspension Options.
  • New!  Bump cap version shields your head from unwanted knocks
  • Original head-harness is fully adjustable for size
• Air Control Options.  Both supplied-air and battery-powered PAPR systems are available as follows:
  • Constant Flow Valve:  Basic supplied-air valve allows control of air volume in hood, but doesn’t provide air cooling.
  • C40:  Premium supplied-air valve allows full control over both air volume and temperature.  Cools up to 52 degrees!
  • HX5:  Basic PAPR option with single speed fan control, audible, and visual alarms.
  • PX5:  Premium PAPR option with multiple fan speeds, audible, visual, and vibratory alarms.  (Great for noisy environments!)
    • Note:  PAPR units do not require tethering to an air-line (making them very portable), but do not provide air cooling (can’t use with C40).
  • Note:  Z4® Headtops without any breathing apparatus are also available.  Shown in product grid below. Includes air connection fitting.
• Cape / Seal Configurations.
  • Zytec FR Shoulder Cape
  • Zytek FR Face Seal
• Optional Accessories
  • Vision-Link™ Rechargeable Light, mounts to respirator helping to illuminate dim work areas
  • Comms-Link™ In-Helmet Communication, utilizes existing 2-way radio systems.
  • Comfort Side Padding System adds even more comfort with adjustable foam padding.
  • Bump Cap option can be purchased separately, or in a package as shown in the product grid below.
  • Quiet-Slim™ helmet-mounted ear muffs provides rated hearing protection for noisy environments.
  • Ultra Magnifying Lens with choice of magnification

• Suits RPB Safety PX5 standard Air-Purifying Respirator (PAPR)
• Used between the PX5 PAPR and Helmet
• Ultra Flexible so the user isn’t restricted in movement
• Sold individually
• Genuine Product – Manufactured by RPB Safety

Experience safety and comfort with the Bullard Heavy Duty unlined leather Blast Gloves. Crafted using resilient Kevlar thread, these gloves are a fortress for your hands.

• Extra-long 8-inch cuff: Maximum forearm protection
• Kevlar thread construction: Exceptional strength and durability
• Reinforced cowhide palm: Enhanced grip and resilience
• Pre-curved fingers: Optimal hand mobility
• Available in sizes Medium – XX-Large
• Sold by the pair or in a pack of 6

Ensure safety with the Safety Whipcheck for Hose Connections (SKU: P-HFSCA). Designed for hoses from ½” to 3½”, these steel-constructed whipchecks restrain hoses during unexpected disconnections.

• Use of a safety whipcheck restraint is mandatory on all hoses
• Whip checks are of steel construction
• HF SCA-1 cable suits hoses ½” to 2 ½”
• For use on Blast hoses (15 mm to 60 mm) OD
• HF SCA-2 cable suits hoses 2″ to 3½”
• For use on blast and bull air hoses (45 mm to 90 mm) OD
• Whip Checks restrains hoses in the event of a failure or accidental disconnection

• Replacement fitting for connecting breathing tube to Gen VX air fed blast helmet
• Genuine Bullard part

• Replacement fitting for connecting new style breathing tube to Nova 2000 respirator helmet
• New style fitting ensures that the breathing tube can not be installed incorrectly.
• Makes the helmet fitting a unique fitting
• Genuine Parts – Manufactured by RBP Safety

Step up your hand protection with our Goat Skin Leather Driver Gloves, SKU: P-NA206. Combining value and durability, these unlined gloves offer sleek comfort and superior flexibility for everyday wear.

• Available in sizes S to XXL.
• Sold by the pair.
• Quantity and bulk discounts available.

Perfect for those seeking durable, yet comfortable work gloves.

• Suits for RPB Radex and Bullard Breathing Air Filters
• Replacement Carbon filled Breathing Air Filter
• Removes unwanted smells and air impurities
• Does not remove CO Carbon Monoxide
• Filter cartridges must be changed every 3 months or 400 hours usage – whichever occurs first, because the charcoal is activated when opened.
• Sold Individually
• Genuine Parts – Manufactured by RPB Safety

The Bullard EVA (Evolutionary Air) PAPR systems are innovative and well balanced, and offer portable respiratory protection for both their loose-fitting and tight-fitting respirators. The Bullard EVA series is black with white trim. The EVAHL (Hazardous Location) version offers all the benefits of the original EVA, with the additional capability of being rated for the HazLoc environments.  The EVAHL series is black with blue trim and has the following certifications:

• Class I, Division 2
• Class II, Division 2
• Class III

Features include: 

• Visual fuel gauge on battery
• Two blower speeds controlled with a single button, designed for quiet operation
• Active Flow Technology – Blower speed remains constant even as filter or cartridge resistance increases
• Low battery and airflow alarms
• Filter / cartridge locking tab for visual confirmation of correct installation

Available as Blower-only, or with the following Standard Package Configurations:

• Belt choices:
  • Closed Cell Foam (adjustable from 28″ to 60″)
  • Decon-Friendly Vinyl Urethane (adj. from 28″ to 60″)
  • (Note:  Belt Extender, Belt Suspender, and Backpack options also available separately.)
• Batteries (Li-Ion) and Chargers:
  • EVA Battery for all ordinary location respirators except Spectrums (Black)
  • EVA Battery for Spectrums (Green)
  • EVAHL Battery for HazLoc respirators (Black)
  • Packages available with or without a single battery charger
  • (Note:  Optional 6-gang chargers also available – order separately.)
• Filters and Cartridges:
  • Packages available with HEPA filter, or without filters
  • (Note:  Combination HE/OV & HE/Acid Gas cartridges, and Prefilters are available separately.)
• Other Features:
  • All packages include airflow indicator

NOTE: MAXXXLife is a user-friendly calculator that helps measure the service life of your Bullard air-purifying respirator cartridge.

• Suits RPB Nova3 and Nova 2000 Blast Helmet
• Canvas Storage bag includes pockets for storing spare lenses and an identification card
• Used to store the blast helmet to keep it hygienic
• Has shoulder straps which are also a drawers string
• Sold Individually
• Genuine Parts – Manufactured by BlastOne

Avoid costly redo’s in auto body or other fine finish painting applications with the DeVilbiss 3-stage compressed air filter / air dryer.

Eliminates moisture and dirt in air lines.  Install at the point of use.

Also includes a ½” ball valve shut-off for easy maintenance.

The Bullard 88 is THE time-tested “work horse” of abrasive blasting helmets.  They are available in multiple configurations, as follows:

• Cape options:
  • 28″ standard length cape
  • 38″ extended length cape
  • 38″ Hibernia Parka w/sleeves, in sizes L and XL
• Flow control options:
  • F30 Continuous Flow Valve (standard)
  • AC1000 Cool tube (available separately)
  • HC2400 Heat/Cool tube (available separately)
• Airline Fittings for Flow Controls:
  • ¼” Industrial Interchange Quick-Disconnect (standard)
  • Alternative Airline Fitting versions include:
    • Schrader
    • Snap-Tite (steel)
    • Snap-Tite (brass)
    • Snap-Tite (stainless)
    • CEJN
    • Bayonet Steel
• Also includes:
  • Breathing Air tube
  • Nylon Belt

Note:  For options not shown, call or chat for pricing and availability.

The T200 Respirator is great for the healthcare market, paint and select industrial applications.  It offers:

• Large viewing window for exceptional downward and peripheral vison
• Moveable lens and airduct positioning to accommodate for facial features, optical aids, and loupes
• Available with two head suspension systems:
  • Bump Cap
  • Head Harness
• Various replacement cape styles include:
  • Tychem 2000 Face Seal (open ears – designed to use with stethoscopes)
  • Tychem 2000 Face Seal/hood (covers ears)
  • Tychem 2000 Full Hood (shoulder length)
  • Tychem 4000 Full Hood, with sealed seams for maximum protection
• Peel-off lenses available
• No fit testing required
• Deconable head suspension system and disposable hood
• Compatible with PAPR

Easy Tear-away protection for RPB Spray Hood Respirator lenses.

Available options as follows:

• Single Tear-away lenses.  These are the most economical versions for standard industrial coatings applications.  These options comes in the following configurations:
  • Full length for all T-Links and for T200’s with full-length capes.
  • Shorter version designed for the legacy T100 model, but which will work on all RPB spray hoods that do not have the optional in-helmet light.
• Cassette Lens system.  These are premium versions, designed for maximum clarity and convenience.  On time-critical spray projects, cassette lenses save valuable time by eliminating the need to stop and change lenses. These come 7 lenses per set, with 10 sets per pack as follows:
  • Full length for all T-Links and for T200’s with full-length capes.
  • Shorter version for T200’s with face seal or any version not using the optional in-helmet light.

NOTE – the shorter versions will not cover the bottom of the lens area on the T200/T-Link full hoods, and should not be used when the optional light is used on the T-Link.

• Replacement frame for holding the inner safety lens securely
• Suits the RPB Nova 3 Respirator helmet

Genuine Product – Manufactured by RPB

• For use with 88 Series and 88VX Series Airfed Blast Helmets
• Includes:
  • Inner Lens
  • Window frame
  • Hinge Pin
  • Gasket
  • Door latch bail

Optimize your APF3000 6-Outlet RPB Radex Breathing Air Filter with the Super High Flow Regulator (SKU: AF04962) by RPB Safety. Specifically engineered to regulate incoming air for optimal filtration.

• Designed exclusively for APF3000 6-Outlet RPB Radex Breathing Air Filter.
• High-performance super flow regulator ensures optimal air intake regulation.
• Enhances filtration efficiency by optimizing incoming air flow.
• Available for individual purchase.
• A genuine part crafted by the renowned RPB Safety, guaranteeing quality and reliability.

The RPB Nova 2000 Blast Helmet with the Cape Cover Band is designed to ensure optimal protection during blasting operations. This cover band is specifically engineered to prevent dust and grit from entering the gap between the cape and the helmet, as well as keeping grit out of the press studs for easier reattachment after cleaning. Sold individually, this genuine part is manufactured by RPB Safety, guaranteeing compatibility and quality for your Nova 2000 helmet.

• Designed exclusively for the RPB Nova 2000 Blast Helmet
• Prevents dust and grit penetration for enhanced protection
• Keeps press studs free of grit for easy cape reattachment
• Sold individually for convenience
• Genuine RPB Safety manufactured part ensures quality and compatibility

• Safety Lens (16-810)
• Suits RPB Z-Link Respirator
• Anti-fog /anti-scratch to give the wearer long time clear vision
• Suitable for welding / grinding / painting / inspection
• Sold Individually

Genuine Parts – Manufactured by RPB Safety

Visor Kit for RPB Nova 2000 (SKU: HLNV2004) includes latch with screws and the face frame to ensure the continued protection of your blast helmet.

• Suits RPB Nova 2000 Blast Helmet
• Common breakage is because the blaster carries the helmet by the face frame instead of the hand strap provided
• Sold as a Kit including;
  • Complete Latch with screws
• Genuine Parts – Manufactured by RPB Safety

• Suit the Bullard Gen VX airfed blast helmet
• Allows you to completely replace the front viewing window
• Sold as a kit including;
  • Window face frame
  • Door seal gasket
  • 1x Inner safety lens
• Genuine Bullard parts

The Radex airline filter (aka canister filter) is the heart of the GVS / RPB breathing air system.  Features as follows:

• Advanced Filtration.  6-stage filtering removes oils, odors, moisture, and particulates from breathing air
• Durable.  Cast aluminum construction for lightweight durability on jobsites as well as in factories.
• Flexible.  Can be either floor or wall mounted using the included twist-and-lock bracket
• Customizable.  Comes with either 2-outlets (1 for an operator and 1 for the CO monitor) or 6 outlets.  And if you already have a 2-outlet version and need to upgrade to 6, this can be done with the Radex Six Outlet Upgrade Kit.
• Other included features.
  • 150 PSI safety pressure relief valve
  • Quick Connect outlet ports
  • Brass manual drain tap
  • Pressure regulator to adjust outlet air pressure
  • Replaceable APF3100 filter element (lasts up to 3 months or 400 working hours)
• Options.
  • Auto Drain Unit.  Automatically drains moisture from Radex, helping to prevent premature failure to the filter element due to maintenance oversight.
  • Micro Mist Filter.  Further removes moisture and oil. Recommended if compressor has possible moisture or oil blow-by issues.  Reduces chance of oil contamination of CO monitor sensor.
  • Mainline Pre-Filter.  Extra support for particulate removal down to 0.15 microns and extends life of primary filter element.
  • 2-claw “Chicago” fitting, #FMAKM12A.  Used to connect the filter to the supply hose from the air compressor.

NOTE:  This unit does not filter or monitor carbon monoxide (CO).  It is designed to be used with the RPB GX4 Carbon Monoxide monitor.

Elevate your production blasting with the Schmidt® AirPrep Deliquescent Desiccant Air Dryer, an industry-standard moisture removal system that uses Deliquescent tablets to absorb moisture for cooler, drier blasting. Experience enhanced efficiency, including 15% faster blasting, while saving on abrasive costs, all achieved through this rugged, skid-mounted system. Tailored to your needs with a range of sizes based on your compressor’s CFM, this galvanized desiccant tank ensures easy maintenance and longevity, promising optimal performance even in high humidity environments and temperature fluctuations.

• The Premium Industry Standard Air Dryer
• Uses Deliquescent tablets to absorb moisture from the blasting air
• Pneumatic Fan motor with Easy Maintenance
• Galvanized Desiccant Tank lasts 5x longer then all competition
• Select size based on the CFM of your compressor
• Come fitted with 4-claw fittings
• 5 year warranty
• Genuine Products – Manufactured by Schmidt® / Axxiom Manufacturing
• ACSD250 / ADS250, ACSD400 / ADS400, ACSD750 / ADS750, ACSD950 / ADS950, ACSD1200  / ADS1200, ACSD1600 / ADS1600

The Air Motor for ACS950 and ADS950 (SKU: AC130009003) is designed to enhance the performance of Schmidt Air Dryers. Pneumatically operated with 4 vanes, it optimally drives the aftercooler fan. Sold individually.

• Custom-made for Schmidt Air Dryers ACS950 and ADS950.
• Efficiently drives the aftercooler fan.
• Pneumatically operated with 4 durable vanes.
• Reversible functionality for extended motor life.
• Net weight of 24 lbs for robust performance.
• Sold individually for user convenience.

• Visor Kit includes hinge and latch (NV3-726)
• Suits RPB Nova3 Blast Helmet
• Used to repair the helmet, the visor most often breaks when blasters
  • Try to install too many lenses
  • Uses the visor as carrying device
• Sold as a complete kit

Genuine Parts – Manufactured by RPB Safety

Help ensure operator safety on industrial cleaning projects with these vacuum hose relief valves.

Available in multiple sizes.

• Padding Connectors (Pair) (NV3-730)
• Padding connectors attach to the inside of the helmet to hold the side pads which encase the blasters ears
• Suits RPB Nova3 Blast Helmet
• Sold as a complete kit including a left and right connector and an allen key

Genuine Parts – Manufactured by RPB Safety

• Lenses Suitable for Clemco Apollo 60 and Apollo 600 Blast Helmet
• Inner Lens is your safety lens – works for both 60 & 600 Helmet – Sold as pack of 25
• Outer Lens protects the Inner from damage, as that is the most expensive lens – Sold as pack of 50
• Tear-Off Outer Lenses, work with an Outer lens, but allow the operator to keep working, tear off a lens and keep blasting – Sold as pack of 25
• Recommended upgrade from the Clemco Helmet is the RPB Nova 3 Blast Helmet – the worlds most comfortable Blast Helmet

Revitalize your AirPrep Air Motor AC130012003 for 8AM (ACS1200 and ADS1200) with the Fan Motor Repair Kit for 1200 Air Dryer (SKU: AC130012099). Complete with 4 vanes, seals, and bearings, ensuring optimal motor performance.

• Designed exclusively for AirPrep Air Motor AC130012003 8AM (ACS1200 and ADS1200).
• Complete repair solution with 4 vanes, seals, and bearings.
• Premium-quality components for a full motor overhaul.
• Ideal for restoring optimal fan motor performance.
• Available as a comprehensive kit for user convenience.

• Nylon capes (see sizes)
• Suits BLD 88 Series Air Fed Helmets
• Suits BLD Gen VX Helmets
• Designed to protect the operators torso from rebound abrasive
• Works great with blast suits
• Sold Individually

• Suits RPB Nova 3 Airfed blast helmet
• Used to provide a seal between the face frame and helmet to keep dust out of the helmet
• Simple to replace
• Sold Individually

Genuine Parts – Manufactured by RPB Safety

• Replacement outer lenses for the RPB Z-Link Respirator helmet (16-811)
• Tear-off are easily removable
• Keep vision field clean and clear without removing helmet
• Pack of 50

Genuine Product – Manufactured by RPB

• 30 Day Money Back Guarantee | Free Returns
• Suits the RPB Nova 3 and Nova 2000 Airfed Blast Helmet
• Inner Bib zips inside the helmet cape to prevent inward leakage of any dust or particles
• Provides a non-scratching seal around the blasters neck
• Can be easily removed and washed
• Sold individually
• Genuine Parts – Manufactured by RPB Safety

• Mount Kit includes 2 mounts and screws (NV3-727/8)
• Suits RPB Nova3 Blast Helmet
• Used to repair the helmet
• Sold as a complete kit

Genuine Parts – Manufactured by RPB Safety

• Head Liner Foam Padding (NV3-735)
• Sold Individually
• Suits RPB Nova3 Blast Helmet

Genuine Parts – Manufactured by RPB Safety

• Suits RPB Nova3 Blast Helmet
• Cape Cover Band is installed over the top of the blast cape
• Used to keep dust and abrasive out of the inside of the blast hood and cape
• Sold Individually
• Genuine Parts – Manufactured by RPB Safety

• Replacement latch for the Nova 2000 Respirator helmet
• Attachment screws included

Genuine Product – Manufactured by RPB

The latest member of our BlasterAll® family of products is our new Rigger gloves.  It’s styled like the original BlasterAll® blasting gloves, but without the extended gauntlet for more convenient every day use. Features include:

• Leather exterior for good abrasion resistance
• Extended cut resistance with Cut Level 5 Kevlar® lining
• Stylish & Comfortable design
• Touch-screen finger tip on index finger
• Extended size selection from X-Small to 2XL-Large

The Schmidt AirPrep™ Air Motor (SKU: AC130004003) is designed specifically for Schmidt® Air Dryers ACS and ADS. This 4-vaned pneumatic motor powers the aftercooler fan, ensuring optimal performance. Sold individually.

• Specifically designed for Schmidt® Air Dryers ACS and ADS (250, 400, 750cfm).
• Drives the aftercooler fan with 4 pneumatic vanes.
• Reversible function for enhanced durability.
• Net weight of 12 lbs.
• Sold individually for your convenience.

• Suits APF3001 2-Outlet RPB Radex Breathing Air Filter
• 3/8″ flow regulator Mounts on top of Radex Lid
• Allows operator to regulate the exiting air into the Radex filter to optimize flow to the blast helmets
• Sold Individually
• Genuine Part – Manufactured by RPB Safety

• Air Intake Assembly
• Includes screws

Genuine Product – Manufactured by RPB

• Head liner clips are used to hold the head liner in the blast helmet
• Suits RPB Nova3 Blast Helmet
• Sold as a packet of 4

Genuine Parts – Manufactured by RPB Safety

• Replacement outer visor hinge lock for the Nova 3 Respirator helmet (NV3-727-2)
• No additional screws or hardware needed

Genuine Product – Manufactured by RPB

• Kit includes L & R Side Padding Frames (NV3-731)
• Suits RPB Nova3 Blast Helmet
• Used to hold the side pads which encase the blasters ears
• Sold as a complete kit

Genuine Parts – Manufactured by RPB Safety

• Replacement neck pad (NV3-735-1)
• Suitable for the Nova 3 Respirator helmet
• Sold in units of 1

Genuine Product – Manufactured by RPB

• • Suits Nova 3 Blast Helmet
  • Genuine lenses are your only guarantee of safety – insist on them in your business
  • Three-part lens system consists of:
    • Standard Clear Inner lens – thick eye protection layer – meets ANSI Z87.1 standard.  Comes 10 per pack (20 packs per case)
    • Optional Tinted inner lens – Helps when blasting in bright sunlight
    • Outer lens – protects the more costly inner lens.  Comes 50 per pack (10 packs per case)
    • Tear-off lens – save time when the lens gets frosted – Use tear away lenses over Outer lenses. Comes 50 per pack.  (20 packs per case)
    • Save even more time with the Cassette Lens – these are pre-assembled with 5 tear-off lenses sealed to 1 outer lens.  Keeps dust from getting between the layers too!  Comes 20 cassettes per box.
  • Sold by the pack (Cassettes by the box)
  • Click for Nova 2000 Lenses

• Suits Warrior 4000 Air Motor
• Repair Kit for rebuilding Air Valve
• Kit Includes:
  • Carriage – O-Ring
  • Air Valve – Cup, Plate, Gasket and 2x O-Rings
  • Nylon Ball Check – O-Ring
• Sold as a Kit
• Genuine Parts – Manufactured by Graco

Optimize your Schmidt® Air Dryers ACS1600 ADS1600 with the Air Motor for ACS1600 ADS1600 AirPrep™ system (SKU: AC130016003). Featuring 8 pneumatic vanes, it powers the aftercooler fan with precision. Available individually.

• Exclusively crafted for Schmidt® Air Dryers ACS1600 and ADS1600 – 1600cfm.
• Pneumatically operated motor with 8 efficient vanes.
• Reversible feature for prolonged motor lifespan.
• Sturdy design with a net weight of 28 lbs.
• Sold individually to cater to your specific needs.

Elevate your Schmidt Air Dryers ACS1200 ADS1200 with the dedicated Air Motor for ACS1200 (SKU: AC130012003). Pneumatically operated with 4 vanes, it efficiently drives the aftercooler fan. Available individually.

• Perfectly compatible with Schmidt Air Dryers ACS1200 and ADS1200 – 1200cfm.
• Efficiently drives the aftercooler fan with pneumatic operation.
• Features 4 durable, reversible vanes for consistent performance.
• Sturdy build with a net weight of 28 lbs.
• Sold individually for your procurement needs.

• Auto Air Valve Replacement Diaphragm Plate
• 2″ replacement diaphragm plate for 2″ Auto Air Valve and 1.5″ Hi-Flo Auto Air Valve
• Sold as quantity of 2

BlastOne offers all DeFelsko instruments and related consumables, available for easy ordering on-line.

Four of the standard formulation 8oz. bottles are included with each new PosiTest® AIR instrument kit, and replacement bottles are offered here in boxes of 16 bottles.

The economical standard formulation is designed for temperatures between -10° C (14° F) to 65° C (150° F).  A low-temperature version is optionally available which works down to -20° C (-4° F).

• Suits RPB Nova 3 Blast Helmet
• Mounts on top of the helmet to provide light in the same direction that the blaster is looking
• Brilliant LED powered light designed for mounting to the Nova3 helmet
• 5 different light settings
• 4 Hour Li-ion rechargeable battery
• Sold as a Kit which includes;
  • L4 light complete kit
  • Battery recharger and power supply
  • Clip accessories to mount to the Nova 3 Helmet
  • Battery pack and belt
• Genuine Products – Manufactured by RPB Safety

• Head Liner Kit (NV3-734) includes
  • Tough polystyrene foam shell
  • Soft top of head padding
  • 4x HLNV37341 Clips
• Sold as a complete kit
• Suits RPB Nova3 Blast Helmet

Genuine Parts – Manufactured by RPB Safety

• Vision-Link Jaw Mount (15-839)
• Screws not included

Genuine Product – Manufactured by RPB

• Compatible with Nova 3, Nova 2000 and most supplied-air blast helmets, painting hoods and vests
• Rugged, compact design with serviceable components
• Includes belt and buckle
• C40 air flow device will cool the incoming air by as much as 52°F (29°C) and heat by 30°F (17°C)
• Cool Air Tube – will cool air by about 32° / (17°C)
• Heat Tube – will heat air by about 30°F (17°C)
• Flow Control Valve – no cooling, just ambient air with a volume control
• Constant Flow Valve – no cooling, just ambient air at full flow
• Sold Individually
• Genuine Products – Manufactured by RPB Safety

The Nova 2000 is designed by blasters for blasters. It offers:

• Large viewing window for exceptional downward and peripheral vision
• Streamlined air distribution system that prevents lens from fogging by supporting air movement across the breathe zone and over the lens
• Hearing protection with multi-layered sound deadening foam
• Sold as complete kit with the following variations:
  • Cape Options:
    • Standard Length Nylon Cape
    • Extended Nylon Cape
  • Climate Options:
    • C40 Heating and Cooling
    • Cool Air Tube
    • Hot Air Tube
    • Air Control Valve
• Genuine Product – Manufactured by RPB

Z-Link® – The most versatile respirator of all! 

This multi-purpose full face respirator delivers comfortable protection in grinding, welding, foundry, painting and other applications. A few of the features are as follows:

• Flip-up Visor.  Makes communication with co-workers easy.
• Superior comfort.  Comfort-Link® padding system is fully adjustable for total size control.
• Maximum protection with the following ANSI approvals:
  • Hard Hat (Z89.1)
  • Hearing (S3.19), when used in conjunction with the Quiet-Link™ earmuffs.  (See below in Options list.)
  • Eye and Face (Z87+)
  • Welding Eye (Z87w), when equipped with the Z-Link removable welding visor

The versatility of the Z-Link® is shown in wide array of breathing options, cape configurations, and accessories, as shown below:

• Air control options.  Both supplied air and battery-powered PAPR systems are available as follows:
  • Constant Flow Valve:  Basic supplied-air valve allows control of air volume in the hood, but doesn’t provide air cooling
  • C40:  Premium supplied-air valve allows adjustment of air temperature in the hood for cooling & heating
  • HX5:  Basic PAPR option with single speed control
  • PX5:  Premium PAPR option with multiple speeds and a vibratory low-battery alarm making it a preferred choice in high-noise environments.
    • NOTE – PAPR units do not require tethering to an air-line (making them very portable) but do not provide air cooling (can’t use with C40)
  • Note:  Z-Link® Headtops are also available without any breathing apparatus.
• Cape / Seal Configurations.
  • Zytec FR Chin Seal
  • Zytec FR Face Seal
  • Zytec FR Shoulder Cape
  • Tychem 2000 Face Seal
  • Tychem 4000 Shoulder Cape
• Optional Accessories and Other Configurations.
  • Z-Link® Flip-up welding visor available separately, or in a package as shown in the product grid below
  • Z-Link® Radiant Heat versions for foundry and high-heat applications (shown separately in this link)
  • Comms-Link® In-Helmet Communication, utilizes existing 2-way radio systems
  • Vision-Link® Rechargeable Light, mounts to respirator helping to illuminate dim work areas
  • Quiet-Link™ helmet-mounted ear muffs provides rated hearing protection in noisy environments.

Trials available for certain applications – contact us for details and see what makes this the best selling respirator offered by GVS / RPB!

• Suits the AirPrep ADS Series
• Replacement deliquescent tablets to refill an air dryer.
• Also referred to as desiccant tablets
• Hard, white tablets can absorb up to 4 times their own weight in water!
• Comes in 50 lb bags, 40 bags per pallet

The GVS / RPB PAPR units redefine what it means to be a powered air purifying respirator with comfort being a priority along with safety.  The 2 versions (PX5 and HX5) are very similar and both offer a long list of features.  A document comparing the PX5 vs the HX5 is under the Documents tab.  Features and benefits are as follows:

• Sleek and modern. Strategically distributes weight through it’s mounting.
• Light weight.  Weighing as little as 2.55 lbs, they are designed to fit comfortably for all-day use.
• Positive Pressure.  Removes the hassle and expense of fit testing and clean-shaven requirements.
• Comfortable.
  • The PX5 has 3 different air-flow speeds.
  • The HX5 has a single air-flow speed.
• Versatile.  Variety of PX5 filters and cartridges available for various applications including HEPA for particulates, as well as Organic Vapor (OV), Acid Gas (AG), and Multi-Gas.  The HX5 is compatible with the HEPA filter only.
• Safe.   They alarm when the battery is low and when the airflow is blocked.  The PX5 has visual, audible, and vibrating alarms, making them great for high-noise environments.  The HX5 has the visual and audible alarms only.  Both units are designed to prevent use if filter is not installed.
• Flexible.  Available in the following configurations:
  • Battery.  PX5 / HX5 PAPR batteries are available in standard or high capacities.
  • Mounts.  Available with a standard belt or an optional back-pack mount.
  • Ratings.  Available with an optional FR rating. Offers a spark arrestor insert to protect the filters while welding or grinding.
• Cleanable.  The PX5 ingress is certified to IP65 (light spray) and can be decontaminated easily.  The HX5 is certified to IP53 (wipe-down ).
• Easy-to-use.  Intuitive LED user interface indicates airflow, fan speed, and battery level.
• Portable.  Without an attached airline (or need for compressed air), these PAPR systems makes it easy to perform your work safely.

Note:  PAPR systems circulate filtered ambient air, and are not compatible with climate control devices or cool tubes.

Additional Note:  Contact us before purchasing if product will be used in an explosive atmosphere.

• Portable Grade-D breathing air filtration system designed to filter incoming air from a compressor to provide Grade-D quality to respirator users while monitoring for CO and O2.
• Monitors for carbon monoxide with a 3 stage filtration system:
  1. First stage element filters bulk water and particulate and has an auto drain
  2. Second stage coalescing filter eliminates atomized oils, mists, ultra-fine particulates, and has an auto drain
  3. Third stage filter removes organic vapors and odors and has a manual drain
• Filter change indicators are standard on all three stages of filtration. Filtration efficiency is 99.99% at .01 micron.
• Incoming air plug with 1/2″ industrial interchange
• Automatic drains with discharge tubes
• Three (3) standard power options available
• Operates on disposable 9-volt batteries, 8-16 volt DC, or 115 VAC

Bullard’s latest Air Quality Box is the AirGuard.  With improved ease-of-use and new capabilities, this unit is a valuable investment in your breathing air safety.  Further details below.

• Flexible.  Comes in 1, 2, 4, or 8 outlet configurations.  And an optional wall-mount is available as well.
• Rugged.  Designed for field use with a sturdy Pelican® case.
• Capable.
  • Has three-stage filtration as follows:
    • Particulate/Bulk Liquid Separation
    • Oil Coalescing and Ultra Fine Particulates
    • Activated Charcoal
  • Monitors Carbon Monoxide as well as Dew Point.
• Easy to use.  Bright 7″ LCD screen shows CO and Dew Point values. It also provides instructions to assist with calibration and reminds you when it’s time to change the filters.
• State-of-the-art.  Continuously logs conditions (which can be downloaded by using the built-in memory stick).  This protects you in 2 ways:
  • CO levels can be proven and Dew Point logs confirm what the atmospheric conditions were at any point of the monitored time.
  • Logs data on the removable USB drive for easy transfer to existing record system
  • Auto-Calibration scheduling, reduces administrative record keeping work.
• Power.  
  • Onboard battery, with expected operation of 16 hours when fully charged.
  • The 12v DC battery charger can be used to operate the AirGuard if the battery charge is exhausted.
• Options.
  • Remote alarm with 100′ cable.
  • 50′ cable extensions

• Safety Lens Bayonet (15-832)
• Pair

Genuine Product – Manufactured by RPB

• Genuine RPB replacement lens for L4 Blast Light
• Ensure you can work with optimal illumination as paint mist eventually coats lens
• Comes in Pack of 10

• Suits T100 Spray Hood
• Sold individually

The Bullard COHP is a stand-alone Carbon Monoxide monitor, and is designed to be used in tandem with a Bullard breathing air canister filtration system.  Additional details include:

• Does NOT remove carbon monoxide – this is a monitor only.
• This 10PPM unit is intended for the USA market.  (5PPM versions available for other Canada and other markets.)
• Provides audible (90dB) and visual alarms when high CO, low battery, or low airflow conditions are present.
• Operates on either AC or DC power.

Climate control tubes / valves are essential for providing air flow to operators using supplied air respirators.  The Bullard CCT’s listed below work with all Bullard respirators, including GVX, 88vx, CC20, and more, and are equipped with Industrial Interchange (aka Hansen) fittings.

• F30 Constant Flow.  Provides ambient air without cooling or flow adjustment. 
• AC1000 Cool Tube:  Cools incoming air by up to 30°.
• AC2400 Heat/Cool Tube: Both cools and heats incoming air by up to 30°.
• DC50 series DualCool®:  When using the DC70 series cooling vest, the Dual Cool climate controller cools incoming air by up to 30° for both the respirator and the vest.
• Frigitron® 2000:  For use with Free Air pump, cools air by up to 20°.

Other Quick Disconnect fitting types (Schrader, Snap-tite, CEJN, and bayonet) are available upon request.

AVAILABLE FOR RENTAL OR PURCHASE

The “Twin line Deadman Control Hose” (SKU: AHRMS4055) offers a safe, heavy-duty solution for pneumatic deadman controls. Bonded and color-coded for enhanced safety, it is available for rental or purchase.

• Bonded, heavy duty, twin rubber hose, color coded for safety
• Used to supply air to the deadman handle which is used to signal a “blast” return charge of air to the blast pot control valves
• Always replace the hose at the first sign of wear, this is a safety deadman control item.
• Fitted standard with male-female threaded connectors
• 1/4″ (6 mm) connectors on ‘supply’ red hose
• 1/8″ (3 mm) connectors on ‘return’ green hose
• 55 ft length
• Please Request Rental Pricing

The Air Pressure Gage is a crucial tool for monitoring air pressure in your blast equipment, ensuring optimal performance and safety. This general-purpose gage is sold individually and designed not to exceed the manufacturer’s recommendation. Secure your blasting operations with this reliable Air Pressure Gage for precise and consistent air pressure tracking.

• General purpose air pressure gages for monitoring of air pressure
• Do not exceed manufacturers recommendation for blast equipment
• Sold Individually

• Suits RPB Nova 2000 Blast Helmet
• Each Cape includes an inner collar and bib
• The Cape and Bib combo is designed to protect the blaster from getting blasting abrasive and dust inside the suit
• Standard Cape is 28″ Nylon
• Leather is good for steel grit applications – more durable
• Hibernia Jackets are great if using a air conditioner, it channels the cool air over the blasters torso
• Sold Individually
• Genuine Parts – Manufactured by RPB Safety

• Lenses designed to fit the Bullard GenVX blast helmet
• Often called Blast Shields
• Sold by the Pack
• Three Part Lens system
  • Inner Lens – Your thick eye protection layer
  • Outer Lens – Protects the more costly inner lens
  • Tear-off Lens – Allows you to tear it off and keep blasting

Quickly and easily detect air and water leaks in bulding envelopes and rigid air barrier systems.  Ideal for testing penetrations (fasteners, masonry ties, etc.) and continuity of joints and seams in rigid air barrier systems.

DeFelsko MPN:  AIR

• Suits RPB Nova 3 Blast Helmet
• Hygiene Kit is a complete swap out of all the “washable” components inside the helmet
• Sold as a Kit including
  • Head Liner Padding
  • Side Padding Foam and Covers
  • Neck Pad
• 4 padding thicknesses available to suit various head sizes
• Additional parts available on the main Nova 3 page here under the Repair Parts tab
• Genuine Parts – Manufactured by RPB Safety

Boost the efficiency of your AirPrep Air Motor with our Repair Kit for ADS1600 Air Motor. Complete with 4 vanes, seals, and bearings, ensuring prime motor performance.

• Inclusive of 4 resilient vanes, seals, and bearings for a complete motor overhaul.
• High-grade components guarantee prolonged motor performance and durability.
• Essential for restoring and maintaining optimal air motor functionality.
• Available as an all-encompassing kit for utmost user convenience.

• Suits Nova 2000 Blast Helmet
• Genuine lenses are your best protection – no other brand offers NIOSH certification.
• Three-part lens system consists of:
  • Standard Clear Inner lens – thick eye protection layer which meets ANSI Z87.1 standard.  Comes 10 per pack (20 packs per case).
  • Optional Tinted Inner lens – Helps when blasting in bright sunlight.
  • Outer lens – Protects the more costly inner lens.  Available in Standard or Thin.  Comes 50 per pack (10 packs per case)
  • Tear-off lens – Allows for easy tear off with no down time. Contains a unique pre-folded tab to ensure that the blaster can only remove one spent lens at a time. Comes 50 per pack (10 packs per case)
• Sold by the pack
• Click for Nova 3 Lenses

Upgrade your Bullard GVX blast hood with Bullard GenVX Genuine OEM Lenses, SKU: P-HVBGVXOEM. These lenses, designed to maintain NIOSH compliance, offer superior visibility and protection for blasting operators.

• Three-part lens system: Inner Lens (40 mil clear), Outer Lens (various thicknesses and tints), Tear-off Lens (perforated or adhesive backed).
• Available in single packs or bulk case quantities.
• Essential for maintaining visibility and protection during abrasive blasting.

Ensure optimal protection and clarity with these genuine replacement lenses.

• Suits RPB Radex Breathing Air System
• Helps to remove moisture and hydrocarbons (Oil)
• Is mounted on the Breathing Air Filter Inlet before the pressure regulator
• Sold Individually
• Genuine Parts – Manufactured by RPB Safety

• Service Kit for the 1″ (25mm) Auto Air Valve
• Used to rebuild the Auto Air Valve in the field
• Includes Gaskets, Diaphragm, Brass Washers, Breather vent and required lubricants
• Replace seals at the first sign of wear

BlasterAlls are the ultimate protective blasting suit designed for blasters. This tough and durable suit is made with a nylon/cotton construction that offers excellent body protection and breathability during abrasive blasting. Key Features Include:

• Boot and hand loops keep the suit securely in place for added operator safety and convenience
• Large interior pockets provide easy access to daily supplies
• Strong triple stitching throughout ensures durability and longevity
• Elasticated cuffs and ankles, hand webbing, heel loops, and double kneepad pockets (order kneepads separately) provide added comfort and convenience
• Suit does not come with a hood
• Click to view Sizing Chart

• Suits Graco AirPro Spray Gun Air Valve
• Repair Kit for Air Valve only
• Sold as a Kit
• Genuine Parts – Manufactured by Graco

Designed for various DeVilbiss guns (including the MBC, JGA, and JGHV), this replacement DEJGS4491unit is the full air valve assembly.  

For a list of included components, see the attached document (using the JGA gun as an example) under item 25.

MPN:  JGS-449-1

• Non-genuine tear-off lenses to suit 3M 6000 full face respirator
• Protects the operators from paint overspray
• Sold as a pack of 25 lenses

• Replacement gasket for the Nova 2000 Respirator helmet (NV2003)
• Sold in units of 1

Genuine Product – Manufactured by RPB

• Head harness for T200
• Air Duct
• Mount Clips

Genuine RPB product

• Suits GVS Integra half-mask w/goggles
• Protects goggles while spraying.  Remove and replace when needed to keep the goggle lens clear.  Save time over cleaning the goggles by hand!
• 10 peel-off visor lenses per pack
• Priced per pack.  5 packs per case.
• Genuine Parts – Manufactured by GVS

Built by Schmidt®, these moisture separators are available in multiple versions as follows:

• Size
  • 800 or 1600 CFM capacity
• Configuration
  • Stationary or Portable (with handle, axle  & wheels)
• Fittings
  • Built with 2″ NPT ports on both Inlet and Outlet, these can be equipped with your choice of Spud or 4-claw fittings, ball valves, splitters, etc.

Note:  Fittings are optional and must be ordered separately.  See You May Also Like below.

• Headtop only
• Multi Purpose full face respirator for grinding, welding and painting and more!
• Flip-up visor for easy communication with co-workers
• Very comfortable design with various options available as follows:
  • Zytec FR Chin Seal
  • Zytec FR Face Seal
  • Zytec FR Shoulder Cape
  • Tychem 2000 Face Seal
  • Tychem 4000 Shoulder Cape
  • Radiant Heat Respirator
    • Includes aluminized shoulder cape, aluminized top cover, rear cover, and breathing tube covers

Genuine Products – Manufactured by RPB Safety

When the primary air dryer is located at a distance from the blast pot, secondary moisture removal becomes critical.  The Sponge-Jet moisture separation tank is ideal for this application.  Includes the following:

• Handle for easy portability
• Spud / BOSS blast hose fitting
• Multiple sized ball valves & couplings

Note:  Customization is available if specific sizes are needed.

Due to our distribution agreement with Sponge-Jet, pricing is not shown on our website.  Contact us for fast, competitive pricing or send in the web form quote request.

Upgrade your Radex airline filter with the precision-engineered “RPB Radex Air Pressure Gauge.” Made with top-notch specifications to ensure reliable and consistent performance:

• Specifically designed as a Radex airline filter component
• Compact 40mm design for a perfect fit
• Optimized to measure up to 145psi
• Features a 1/8″ fitting for versatility
• Ideal replacement for part APF3013
• Official RPB part (001-00126) ensuring quality and compatibility

Choose the RPB Radex Air Pressure Gauge for dependable measurements and longevity in your airline filtering system.

• Replacement belt which holds control valve for the Nova 2000 Respirator helmet
• Genuine RPB part

• Heavy-duty leather front for protection of arms and legs, extending coverall life.
• Strong cotton back for ventilation and comfort in hot climates.
• Ties at sleeves for adjustable fit, keeping out residue, media, and dust.
• Optional leather gauntlet gloves for added protection of hands and wrists.
• Available in six different sizes, from S to 3XL, ensuring a suitable fit for every operator.
• Press stud closures and Velcro strip fastening for double protection from grit ingress and resistance to damage from steel grit.
• Compatible with Nova3 blast helmets and blast capes (HLNV3752 or HLNV3753) for full leather front protection.
• Designed to meet the most stringent government guidelines.
• Tough cowhide covers ensure protection, while strong cotton back enables suit to ventilate for comfort in hot climates.
• Leather fronted sandblasting suits guarantee protection from harmful abrasive ricochet and momentary direct impact.
• Heavy-duty half leather fronted abrasive blasting suit (leather front extends from the waist down).
• Comfortable ‘breathable’ cotton back.
• Adjustable wrist and ankle straps.
• Front press stud and Velcro strip fastening.
• Most commonly used when blasting with steel grit media.
• Sold individually.

The Bullard DC70 cooling vest is an investment in operator comfort. Durable and effective, it requires pairing with a Bullard climate control tube.  Additional details as follows:

• Use the DC5040 dual-cool tube to combine the vest with a respirator.
• Can also be used without a respirator, when paired with either the AC1000DC or CT30DC cool tubes.
• Multiple sizes available.

The Controlled Expansion Nozzle (CEN) Muffler Kit by Axxiom / Schmidt for Mega Pots significantly improves safety as well as reducing blowdown noise.

• Using a CEN muffler removes the risk of freeze-up at the vent. Without this muffler, dangerous pressure can remain in the pot due to vent freeze-up.  Injury or death can result to an operator who removes the abrasive loading cover under pressure.
• In addition, noise levels during blowdown without a CEN can exceed 140db.  With the CEN, the noise is reduced to 92db.
• The kit includes a 3″ NPT thread connection.  As mounting brackets are not included in the kit (due to the restriction on welding on a pressure vessel after certification), customer will need to decide best place for mounting, possibly using the ladder.  BlastOne technicians are available – contact us if any questions.

• Spring Assembly Kit (15-822)

• Harness Mount (15-842)
• Pair

Genuine Product – Manufactured by RPB

The Bullard Air Gladiator (aka breathing air canister filter) is an updated version of the previous 41 series.  It has the same 7-stage filtration as before along with a new handle and mounting options. Additional details as follows:

• Available with 2 or 6 outlets
• Anti-tip base for portable applications
• Built-in handle doubles as a wall-mount bracket for stationary applications

This safety glove offers robust protection against common hazards and is constructed of breathable 13 gauge HPPE with high-vis TPR rubber backing. It offers the following protections:

• Impact. ANSI Level 2
• Cut. ANSI Level 5
• Puncture. ANSI Level 5
• Abrasion. ANSI  Level 5

It has a Velcro closure and includes reinforced pad between thumb and forefinger for extended durability.

• Breathing Air Filter to remove dust and oil particles
• Carbon Filter removes nuicance odors, must be replaced every 3 months.
• Suited for up to 4 operators
• DOES NOT remove carbon monoxide (CO)
• Cast metal body with bolted plastic base
• Includes inlet air hose connector
• Does not include double action quick connects – order separately

• Headtop only. (If the complete respirator with breathing tube and climate control is needed, click here.)
• Large viewing window for exceptional downward and peripheral vision
• Adjustable sizing to ensure a customizable secure fit for all head shapes and sizes
• Moveable lens and airduct positioning to accommodate for facial features, optical aids, and loupes
•   Various options available in Head Harness or Bump Cap Assemblies:
  • Tychem 2000 Face Seal
  • Tychem 2000 Shoulder Length Hood with Face Seal
  • Tychem 2000 Hood
  • Tychem 4000 Hood with Sealed Seams

Genuine Products – Manufactured by RPB Safety

• Service Kit for the 1-¼ (32mm) and 1-½ (38mm) Auto Air Valve
• Used to rebuild the Auto Air Valve in the field
• Includes Gaskets, Diaphragm, Brass Washers, Breather vent and required lubricants
• Replace seals at the first sign of wear

Enhance the life of your AirPrep Air Motor AC130009003 6AM (ACS950) with the comprehensive Repair Kit (SKU: AC130009099*). Complete with 4 vanes, seals, and bearings, it’s everything you need for a thorough motor refurbishment.

• Exclusively designed for AirPrep Air Motor AC130009003 6AM (ACS950).
• Comprehensive kit includes 4 vanes, seals, and bearings.
• High-quality components for effective refurbishment.
• Ensures prolonged motor lifespan and optimal operation.
• Sold as a complete kit for user convenience.

• Suits 5 Gallon Drum
• Agitator Kit with Pail Cover
• Air Powered 1/4 HP Motor (Air Inlet 1/8″)
• Agitator and Shaft length 13.25 inches
• Carbon Steel Lid with Lift handles for ease of removal
• Includes Locking bolts to secure the lid
• Maximum Speed 800 RPM
• Sold as a Kit
• Genuine Parts – Manufactured by Graco

OTK Crimp Hose Clamps (SKU: P-OTKCHC) offer a reliable solution to attach and seal hoses onto various fittings, such as barbs or nipples. Crafted for precision, these clamps ensure a tight fit, reducing the risk of leaks. Whether you’re working with a Twinline control hose or an AHB-10 breathing air hose, we’ve got the right size for you:

• For Twinline control hose: Use size 1113
• For AHB-10 breathing air hose: Use size 1518

AVAILABLE FOR RENT OR PURCHASE

• The Contractor King Pump – a recent addition to the Graco King sprayer family, designed for increased portability and affordability.
• Unparalleled finish quality with cutting-edge anti-icing technology
• Robust, low-profile design offers extreme mobility
• XL6500 Air Motor
• Purchase package includes Silver Plus™ Gun, 3/8″ x 50ft hose, 1/4″ x 6′ whip hose, XHD 417, 519 SwitchTip™ & Guard

• Suits Mist Blaster Blast Machine and other Blast Machines
• 1-1/2” Hi-Flow Inlet Air Pressure Regulator
• Has a ‘T’ handle for easy adjusting with a locking nut to ensure the gauge doesn’t change once set
• Rated to regulate up to 300 PSI

• Suits RPB Nova3 Blast Helmet
• The Adjustable Head Support is used to adjust the blast helmet to the perfect size of the blasters head
• Sold Individually including the ratchet adjustment knob
• Genuine Parts – Manufactured by RPB Safety

• 1/4″ NPT female threads Confidently and quickly connect/disconnect your RPB® respiratory, eye safety and PPE equipment

Optional accessory which adds foam padding to the Z4® welding respirator.  Includes velcro attachment pieces.

MPN 15-848

Genuine Product – Manufactured by GVS / RPB

• Head Harness Assembly (15-840)
• Includes Head Harness Ratchet Assembly (16-530) and Comfort-Link Side Padding System (16-848)

Genuine Product – Manufactured by RPB

The Red Rubber Air Hose is a standard duty hose ideal for powering machinery, tools, and air motors, crafted from high-quality EPDM synthetic rubber with a 200psi rating. Available in sizes from 3/16″ to 2″, it’s sold by the foot unfitted and can also be procured in full coils between 200 and 500 feet long, offering versatility and dependability for medium flow air supply needs.

• Standard duty red rubber air hose
• High Quality EPDM Synthetic rubber cover and tube
• 200psi rated
• Ideal for Machinery, tools and air motors
• Not Rated for Breathing air
• Sold by the foot unfitted
• Available in unfitted full coils between 200 and 500 feet long, depending on ID. (Can be up to 3 separate pieces per full coil)
• I.D. Sizes available from 3/16″ to 2″
• Prefitted Chicago hoses available here

Other PSI ratings, prefitted custom lengths, and other colors available – enquire.

• FREE Shipping
• 30 Day Money-Back Guarantee | Free Returns
• Two suspension options: web style or DLX comfort fit style
• 3 lens system with the outermost being perforated tearaway lenses – speeds the way to clear vision during blast operations
• Deep window extends over the cape attachment area to prevent cape wear from rebounding abrasive
• An integral visor extends out of the top of the installed lenses to prevent the media from lodging between the lenses

The AirPrep Air Motor Repair Kit AC130004003 4AM (SKU: AC130004099) is the ideal solution for maintaining your AirPrep Air Motor, suitable for ACS250/400/750. Complete with seals and bearings for a thorough repair.

• Exclusively tailored for AirPrep Air Motor AC130004003.
• Perfect compatibility with ACS250, 400, and 750cfm models.
• Kit includes 4 vanes, seals, and bearings for a comprehensive repair.
• Optimized for longevity and performance.
• Sold as a complete kit for convenience.

Boost your 400cfm Schmidt® AirPrep™ Air Dryer’s efficiency with the 1/2″ Filter/Regulator/Lubricator (SKU: ACFRL13400MP) by Master Pneumatic®. This FRL unit combines MP165 filter/regulator and MP167 lubricator for optimal performance.

• 1/2″ Filter/Regulator/Lubricator designed exclusively for Schmidt® AirPrep™ 400cfm Air Dryers.
• Features both MP165 filter/regulator and MP167 lubricator for a comprehensive air system care.
• Manufactured by the esteemed Master Pneumatic® brand.
• Master Pneumatic® specializes in a wide range of FRL combinations, catering to various applications.
• A crucial addition for maximizing the efficiency and lifespan of your air dryer systems.

• Replacement Spring for the 1 ¼” and 1 ½” auto air valve
• Used to return the diaphragm back to its closed position
• Sold Individually

• Replacement Spring for the 2” auto air valve
• Used to return the diaphragm back to its closed position
• Sold Individually

• 30 Day Money Back Guarantee  |  Free Returns
• Industry standard coupling for use with air supply hose
• Rugged steel construction
• Quarter-turn quick action connector
• Supplied with 3/4″ I.D. bore gaskets fitted
• Use HF CLP-1 or HF CLP-2 Lock Pin – (not included)
• Available with hose tail, male threads, or female threads
• Sold individually

The Binks® 190 gun is bult-to-last, and is used for blowing off dust, chips, and other debris from surfaces.  Excellent for cleaning, it features a pistol grip and aluminum die-cast body.

It requires 3.5cfm of air at 50PSI through the ¼” NPT fitting.

MPN:  6580-0000-1 (aka 6580-000-1)

An optional 5-½” extension is available (MPN 60-41).

• Safety Lens (16-810-MT)
• Mirror Tint
• Anti-Fog / Anti-Scratch

Genuine Product – Manufactured by RPB

• Must be installed in all blast hose couplings for safety
• Stops the blast hose coupling rotating and disconnecting
• HF-CLP1 is the thin type lock pin (Pack of 25)
• HF-CLP2 is the thick type lock pin (Pack of 25)
• HF-CLP3 is the nylon coupling spring type lock pin (Pack of 10)
• HF-CLP4 is the multi-fit spring type lock pin (Pack of 25)

• Premium Deadman Technology
• Comfortable to hold – increases operator compliance
• Available as Electric or Pneumatic in 2 configurations each:
  • 2-position (on/off) version
  • 3-position version with the following:
    • Position 1 – Air Off / Abrasive Off
    • Position 2 – Air On / Abrasive Off (for blowing off)
    • Position 3 – Air On / Abrasive On (for blasting)
• This handle can be used with any blast control setup, but comes standard with each new BAABS deadman system purchase – see here for the main BAABS page.
• Genuine Products – Manufactured by Schmidt / Axxiom Manufacturing

Upgrade your Breather Box with the Replacement Filter Kit for BB15 and BB30 (SKU: AFBB30FK). Comprehensive set by Air Systems, designed for APCMBB30’s 15 and 30 cfm boxes.

• Exclusively designed for Breather Box APCMBB30 (15 cfm & 30 cfm).
• Complete filter kit offering comprehensive air purification.
• Kit includes one of each A, C, and D filters.
• Available for purchase as a complete kit.
• Genuine product manufactured by the renowned Air Systems.

• The original King High-Flow Sprayer from Graco is proven to outperform and outblast other sprayers in it’s class.
• This mid-size XL6500 Air Motor can handle large jobs that require a high-output sprayer, to support multiple spray guns
• Includes: Integrated filter, heavy duty cart, air kit, siphon kit and hose/gun kit
• Genuine product – manufactured by Graco
• Pump Size Calculator

Experience enhanced air dryer performance with the 1/2″ Filter/Regulator/Lubricator (SKU: ACFRL131600MP) by Master Pneumatic®. Perfectly tailored for 750cfm – 1,600cfm Schmidt® AirPrep™ systems, including both MP160 filter/regulator and MP125 lubricator.

• 1/2″ Filter/Regulator/Lubricator tailored for Schmidt® AirPrep™ systems ranging from 750cfm to 1,600cfm.
• Incorporates both MP160 filter/regulator and MP125 lubricator for comprehensive care.
• Quality assurance from the renowned Master Pneumatic® brand.
• Master Pneumatic® offers an extensive range of FRL combinations to cater to diverse applications.
• An essential add-on for maximizing the longevity and efficiency of your air systems.

• 30 Day Money Back Guarantee | Free Returns
• Fits RPB Nylon Blast suits as well as BlasterAlls suits
• Genuine RPB Safety Part
• Price shown is per pair.

MOBILE DUST COLLECTOR, AIR SCRUBBERS & PORTABLE DUST EXTRACTORS

• Ready availability all over the US
• Diesel powered
• Trailer mounted or skid mounted
• Industry leading design
• All sizes available
• Read our Dust Collector Buying Guide
• Portable dust extractor for site work
• Onsite dust collectors and onsite dust ventilation
• Industrial portable dust collectors

AVAILABLE FOR RENT OR PURCHASE

A Graco King Paint Sprayer Pump will easily spray:

• Medium to Ultra-high viscosity coatings
• Plural component coatings
• High-build, high-solids epoxy primers and coatings
• High-build, high-solids Polyurethane top coatings
• Waterborne coatings
• Fire retardant coatings
• Pump Size Calculator

The bail is a clip used in the Bullard 88VX latch assembly.

Each new unit comes with this bail.  Replacements, available here in packs of 10, are also included in the door maintenance kits.  (See You May Also Like below.)

MPN:  88VXBAIL

• Protective system for high heat environments
• Aluminized features deflect heat away from the user
• Made with flame resistant and reflective materials
• Very comfortable design with multiple air control options as follows:
  • Constant Flow Valve: Basic supplied-air valve allows control of air volume in the hood, but does not offer heating or cooling of the air
  • C40: Premium supplied-air valve gives full control over air volume as well as temperature, and offers both heating and cooling
  • PX5: Premium PAPR option with multiple speeds
    • NOTE – PAPR units do not require tethering to an air-line (making them very portable) but do not provide air cooling (can’t use with C40)

The Fitted Chicago Air Supply Hoses are heavy-duty, 300psi rated hoses, designed with high-quality EPDM synthetic rubber for optimum durability, ideal for powering machinery, tools, and air motors. They come prefitted with Chicago-style couplings, ensuring a secure, easy-to-use solution for your air supply needs, with other sizes available upon enquiry.

• 30 Day Money Back Guarantee | Free Returns
• Heavy duty rubber air supply hose – fitted
• High Quality, EPDM Synthetic rubber cover and tube
• 300psi rated
• Ideal for Machinery, tools and air motors
• Not Rated for Breathing air
• Prefitted with Chicago-style couplings

Other sizes available – enquire.

This glove delivers superior chemical resistance (including to MEK) and offers good dexterity and comfort. It has the following specifications:

• Thinnest butyl glove we offer, delivering enhanced comfort
• ANSI 3 Abrasion Resistance rating
• Latex free
• Roughened hand-surface for improved gripping power
• Effective protection against highly aggressive chemicals, including aldehydes, ketones, and esters. See Documents tab for specific chemical protection chart.

Priced per pair,  with 36 pairs per case.

• Ultra flexible – easy to handle
• 200 psi air pressure rated, 85 psi fluid pressure rated
• Color coded Siamese hose
• Solvent compatible fluid hose liner
• Coupled with 3/8″ fluid / ¼” air fittings
• Standard 25 ft or 50 ft lengths
• Hose also available in made-to-order lengths and bulk – Call us!

This nitrile glove delivers excellent grip for most wet and greasy surfaces, suitable for applications involving contact with oils, cleaners, etc.  It has the following specifications:

• 6 mil thickness, 9.5 inches long
• Embossed internal grip provides extra traction
• Fish-scale pattern grip
• Powder free
• Latex free
• Touchscreen compatible

Packed in box quantity of 100 ambidextrous gloves (50 pair).

• Suits MistBlaster
• Used to control the water flow to the nozzle, via the injector block
• Air Actuated 2-Way Valve
• SS T-Port Ball Valve 1/2″, Spring Return
• Mist Blaster requires 2 Valves
• Sold Individually

Specifically designed for 1-1/4″ to 1-1/2″ valves, part number 2123-007-21 guarantees a perfect fit and reliable operation.

• Perfect Fit for 1-1/4″ to 1-1/2″ Auto Air Valves
• Genuine Axxiom Part: 2123-007-21

• Most Common Paint Mixing Drill
• Pneumatic Drills are required when mixing paint, because it is an explosive hazardous area.
• Drill works off a 3/8″ Airline, using 5cfm of air
• Suits Paint Mixers up to 1/2″ diameter
• Sold Individually

• Secure connection for your Nova 3 respirator
• Enhanced safety in hazardous environments
• Easy installation without specialized tools
• Durable construction for long-lasting performance
• Designed exclusively for the Nova 3 respirator

Elevate your safety gear with Bullard EVA and EVAHL PAPR Batteries & Chargers, SKU: P-BLDEVABAT. Offering a range of reliable Li-Ion batteries and versatile chargers, these are essential for maintaining continuous protection in various work environments.

• EVA Batteries for Ordinary Location Respirators (Black) and Spectrums (Green).
• EVAHL Battery for Hazardous Location Respirators (Black).
• Single and 6-gang Battery Chargers for both Ordinary and Hazardous Locations.

Always be prepared with an extra battery on charge, ideal for individual or team use.

Elevate your paint booth’s efficiency and safety with the Liftman Pneumatic Paint Booth Personnel Manlift, Twin Wheel Version, SKU: SBPL05W. This pneumatic lift is ideal for explosion-sensitive areas, reaching a working height of up to 14′ 9″.

• Twin Wheel Version for stable and smooth operation.
• Pneumatically operated, ensuring safety in explosive environments.
• Self-centering steering for effortless maneuverability.
• CE, CAS, UL certified and ATEX compliant.

A game-changer for blast and paint facilities, it replaces ladders to enhance safety and job efficiency.

Hose set includes:

• 25ft Air/Fluid, bundled hose
• Stainless steel couplings to fit AirPro spray gun

Suits Triton / Warrior 3/8″ Paint Fluid Line / 1/4″ air line 

MPN: 233499

• RPB blast suits enhance worker comfort and protect the wearer from abrasive rebound.
• The heavy-duty breathable cotton back helps keep you cool.
• Robust nylon zipper with protective cover
• Heavy-duty nylon gives extra protection to the arms and fronts of legs and has abrasion resistance for a longer life.
• Elasticized waist for a comfortable fit (takes the weight off the operator’s shoulders).
• Elasticized wrist and adjustable ankle cuffs to keep abrasive out.
• Seven different sizes from S to XXXXL.
• Triple stitched.
• Optional Knee Pads are available.
• Suit does not come with a hood.
• Sold Individually
• Genuine Products – Manufactured by RPB Safety
• See also BlastOne’s new BlasterAlls Blast Suits

• Replacement battery for the PX4 Powered-Air Purifying Respirator
• Genuine RPB product
• Long life, lightweight Lithium battery
• Rechargeable
• Delivers up to 13 hours on single charge

• Replacement Pre Filter for the PX4 Powered-Air Purifying Respirator
• Genuine RPB product
• Comes in pack of 10

• Replacement filter drain valve for the RPB Radex Breathing Airline Filter (P-APF3)
• Made of brass
• Sold individually

The sturdy nylon strap aids convenient carrying of the Bullard 88VX respirator.

Each new unit comes complete with this strap.  Replacements available here.

MPN:  88CA

Enhance your Radex Airline Filter system with the Auto Drain Assembly (SKU: AP04-931). Specifically designed for the Radex Breathing Airline Filter, this assembly offers:

• **Easy Installation and Maintenance**: Quickly integrate it into your existing system without the fuss.
• **Efficient Moisture Drainage**: Reliably drains accumulated moisture, ensuring your breathing air remains clean and safe.
• **Extended Filter Lifespan**: By efficiently removing moisture, it reduces the wear on your filter, enhancing its lifespan and performance.
• **High Compatibility**: Perfectly fits and functions with your Radex Breathing Airline Filter.

Don’t compromise on breathing air quality. Equip your system with the Auto Drain Assembly and breathe easier knowing your air is cleaner.

Replacement filter cartridge for AirGladiator and legacy Series 41 breathing air canisters.

Instructions for use and other details available on the manual, available under the Documents tab.

• MegaFlow heavy duty air supply bull hose
• Used to supply the large volume of air required for sandblasting
• Made from high-quality rubber compounds that are oil resistant
• Tough, UV resistant outer cover resists breakdown from sunlight
• Nylon braiding to make it more flexible and easier to man-handle
• Rated to 300psi with 3:1 safety factor
• Fitted Bull Air Hoses also available

Industrial Vacuums are powerful!  So much so that if your arm gets sucked into the hose, it can cause substantial bodily harm.

Vac Hose Safety Inlets are designed to keep the operator safe.  Don’t wait until you have an incident – equip your vacuum hoses with these simple, yet effective inlets.

• Protect your operator with the Vacuum Safety Inlet Sleeve
• Fits onto the inlet of your vacuum hose to reduce accidents involving operator clothing / limbs
• Durable construction resists wear and tear for long-lasting protection

Contact us for information on other sizes / types.

When your G3 Trigger Deadman system needs refreshed, we have the replacement parts you need.  This is the trigger safety flap sub assembly, which includes the spring & pin, and comes 2 per pack.

• Safety flap subassembly requires positive trigger engagement by the operator, thereby preventing accidental blasting
• Heavy-duty construction for long-lasting use
• See the repair parts tab on the main BAABS page here for additional replacement parts.

The Inlet Airline Moisture Separator, designed specifically for abrasive blasting, provides final stage moisture droplet removal before air enters the blast machine, ensuring minimal pressure loss for peak blasting productivity. Utilizing an elementless design with a tangential flow, and an internal stainless steel coalescer, it handles large air volumes without efficiency loss. This system can be sized at 250cfm or 400cfm based on your blast nozzle and compressor size, and though it requires separate order of inlet fitting or ball valve, it promises improved blasting performance with drier air.

• Installed at blast machine inlet for final stage moisture droplet removal before air enters blast machine
• Tangential flow and elementless design
• Minimal pressure loss for peak blasting productivity
• Requires 1/4′ ball valve for drainage – part no. FVBL006
• Optional autodrain accessory available
• Male threaded inlet and outlet ports
• Inlet fitting or ball valve not supplied – order separately
• Specify Size – 250cfm or 400cfm, based on the size of your blast nozzle and compressor
• Includes internal stainless steel coalescer

• Auto Drain Functionality: The Auto Drain Unit eliminates moisture buildup in the Radex Breathing Airline Filter, ensuring optimal performance
• Effortless Maintenance: Say goodbye to manual draining – the Auto Drain Unit saves you time and effort
• Enhanced Filter Lifespan: Extends the lifespan of your Radex Airline Filter by efficiently removing moisture

• Safety Lens (16-810-ST)
• Smoke Tinted
• Anti-Fog / Anti-Scratch

Genuine Product – Manufactured by RPB

• Used for reduced-pressure blasting of delicate surfaces such as car panels, stone facades, etc.
• Not recommended for normal production blasting due to inherent flow restrictions. Regulator should be disconnected or by-passed for full pressure blasting

• Keep your helmet/respirator essentials clean and prevent wear during storage and/or transport
• Fits Nova 3, Z-Link, T-Link and PAPR systems
• Genuine RPB part #18-600

• Powerful and efficient air circulation
• Enhanced ventilation for optimal air quality
• Durable construction for long-lasting performance
• Easy installation and maintenance
• Suitable for a wide range of industrial applications

When your Bullard 88 VX respirator needs rebuilt, this replacement suspension comes with the inner shell (including the air plenum) along with the Flex-Gear® ratchet and poly brow pad.

MPN:  88VXRTP

Maximize your blasting efficiency with Schmidt® AirPrep™ Aftercooler Moisture Removal Systems, engineered for superior performance even in high humidity environments or critical applications. Utilizing an over-sized radiator for optimal flow and cooling, this rugged system features a stainless steel coalescing demister pad, ensuring non-restrictive, effective moisture removal, and requiring no replacement elements. Built to last, the Schmidt® AirPrep™ enhances production by allowing up to 15% faster blasting and reducing abrasive expenditure, thanks to its negligible pressure loss design and efficient moisture elimination.

FOR RENTAL OR PURCHASE

• The Premium Industry Standard AirDryer
• Uses Aftercooler design to cool the air for maximum moisture removal
• Removes 90% of the moisture in the blasting air
• Pneumatic Fan motor mean you don’t need electricity to run this onsite
• Size based on the size of your compressor
• Suitable for warm weather or indoor use
• Genuine Schmidt® Products – Guaranteed to Perform!

• Flip-up weld visor (16-670) for quick transition between welding and grinding
• ANSI Z87+ (EN166) approved grinding lens for eye protection
• Removeable ADF lens and replaceable impact lens
• Sold individually, ready to install on a Z-Link Respirator

Genuine Parts – Manufactured by RPB Safety

• Replacement / Back-up battery for RPB Nova 3 L4 helmet light
• Rechargeable
• 4 hour Li-ion battery
• Genuine RPB product

Binks® Pressure Pots – the traditional pressure tank used in conventional spraying setups.  This group is the versatile 5 gallon size.

• Construction.  Available in galvanized and stainless steel.
• Configurations.  Can be supplied in a variety of setups, including the following:
  • Bare tank assembly. Without regulators or agitators.
  • Regulators.  Single or dual with choice of standard or sensitive type available.  (Sensitive is used for improved low-pressure fluid control.)
  • Agitators.  Hand crank, powered, or gear-reduced powered types available.  (Gear-reduced is used for higher viscosity and/or higher volumes of coating, and reduces risk of air entrainment.)

Enhance your blasting operations with the Squat Aftercooler AirDryer System, a compact, industry-standard moisture removal solution designed to increase blasting speed by up to 15%. Leveraging an Aftercooler design for optimum cooling, this system effectively removes moisture, saving on abrasive costs, and comes in sizes tailored to your compressor capacity. Rugged, portable, and equipped with a stainless steel demister pad for effective moisture removal, the Squat Aftercooler AirDryer System is built for high performance in high humidity and varied temperature environments.

• The Industry Standard AirDryer
• Squat Compact Design
• Uses Aftercooler design to cool the air for maximum moisture removal
• Pneumatic Fan motor
• Easy Maintenance
• Size based on the size of your compressor
• ACS250Squat – Rated to 250 cfm (good for 1x #6 blast nozzle)
• ACS400Squat – Rated to 400 cfm (good for 1x #7 blast nozzles
• ACS750Squat – Rated to 750 cfm (good for 2 blasters)
• ACS950Squat – Rated to 950 cfm (good for 2 blasters or occasionally 3)
• This unit will perform best when used in climates where the ambient temperature is above 50°F. Not recommended for use in climates that freeze. Recommend P-ACSD.

• Welding ADF Rear Lens (16-873)
• Pack of 10

Genuine Product – Manufactured by RPB

• Flame Retardant Shoulder Cape (15-721)

• Head Harness Bracket and Adjustment System (15-830)

Genuine Product – Manufactured by RPB

• Full Face Mask Respirator for better breathing protection than halfmask
• Solvent resistant visor for easy cleaning
• Peel off visors available
• Comfortable, lightweight and durable mask.
• Low Breathing resistance
• Genuine Parts – Manufactured by 3M Safety

From the makers of the Nova Respirators!

• GVS Masks are made from TPE and are hypoallergenic and non-irritating.
• Extremely lightweight and comfortable.
• Each mask includes the initial set of filters installed and is ready-to-use.
• Price shown per-each.  Packed 5 per case, with case discount.
• Multiple filter versions available as follows:
  • Standard P100
  • Enhanced P100 w/Nuisance Odor control
  • OV / P100 – P100 Organic Vapor protection.  Painters favorite!
  •  Reuse your respirator by using the low-profile line of GVS replacement filters, which include a pre-filter option which extends the life of the OV / P100 filter.
• NIOSH Approved goggles provide ANSI Z87+ eye protection.
• Goggles are scratch and fog resistant.  Tear-off lenses available separately to keep them clean while spraying

NOTE – This is the low-profile series with enhanced field of vision. Standard-profile Integra Masks (which offer Acid Gas & Multi-Gas filter options) are also available.

Your regular eyeglasses will not fit under these goggles. However, GVS makes an Integra Prescription Lens insert to fit inside, which you can give to your optician to have fitted with your prescription.

As with all close-fitting respirators, these are designed to be used where fit testing is conducted.  The GVS Portacount Adaptor is available to facilitate this testing.

From the makers of the Nova Respirators!

• GVS Masks are made from TPE and are hypoallergenic and non-irritating.
• Extremely lightweight and comfortable.
• Each mask includes the initial set of filters installed and is ready-to-use.
• Price shown per-each.  Packed 4 per case, with case discount.
• Multiple filter versions available as follows:
  • OV / P100. Removes Organic Vapors along with P100 filtration. Painters choice!
  • OV / AG / P100. Protects against organic, inorganic, chemical gases, and particulates.
    • Solvents
    • Chlorine and Chlorine Dioxide
    • Hydrogen Chloride and Hydrogen Fluoride
    • Sulphur Dioxide
    • Organic Vapors
  • Multi-Gas. Protects against organic, inorganic, chemical and ammonia based gasses. All acid gases above, plus:
    • Ammonia
    • Formaldehyde
    • Hydrogen Sulfide
    • Methylamine
  • Multi-Gas / P100. Protects against organic, inorganic, chemical and ammonia based gases, and particulates.
  • Keep your respirator fresh with the standard-profile line of GVS replacement filters.
• NIOSH Approved with ANSI Z87+ eye protection
• Goggles are scratch and fog resistant.  Tear-off lenses available separately to keep them clean while spraying.

NOTE – This is the standard-profile series, which has the largest variety of protective filters.  Low-profile Integra Masks (which offer an enhanced field of vision) are also available.

Your regular eyeglasses will not fit under these goggles.  However, GVS makes an Integra Prescription Lens insert to fit inside, which you can give to your optician to have fitted with your prescription.

As with all close-fitting respirators, these are designed to be used where fit-testing is conducted. The GVS Portacount Adaptor is available to facilitate this testing.

• Ensures a secure and tight connection
• Prevents air leakage and maintains optimal filtration efficiency
• Easy to install and compatible with a wide range of Radex Breathing Airline Filters

• Suits MegaFlow Bull Air Hose (BHBULL50/75)
• Ground Joint Spud Hose Fittings made of Plated Iron – Connects Air hose to Equipment
• Recommended by BlastOne as the preferred Bull hose fitting – safer than 4-claw
• Sold Individually
• Genuine Parts – Manufactured by Dixon

The Air Tool Lubrication Oil is made to optimize performance, while prolonging the life of air tools, cylinders, and accessories.

• Use with in-line lubricators or pour directly into tool reservoir
• Prohibits rust and removes moisture
• Non corrosive, non-reactive, and does not decompose
• #10 weight lubricant

128 fluid ounces (1 gallon)

• #1 mask used by painters in USA
• Comfortable, lightweight and durable mask.
• Low Breathing resistance
• Filters available for gas and particulate protection.
• Genuine Parts – Manufactured by 3M Safety

In-Helmet communication systems make communication between a blaster/operator and other team members much easier and safer. RPB respirators are modular, meaning they can be upfitted with this option at any time. Several options available as follows:

1. Z4 Comms-Link™ Upgrade Kit, includes noise-cancelling microphone, PTT button, and 15-848 padding kit for the Z4.
2. Z-Link / T-Link Comms-Link™ Upgrade Kit, includes noise cancelling microphone, PTT button, and 16-520-S padding kit to fit either the Z-Link or T-Link.
3. Z-Link / T-Link / Z4 Headset Package, includes noise-cancelling microphone and PTT button.  This kit does not include padding, and assumes that it will be used with previously-installed padding.  (If you need padding with the kit, purchase one of the Upgrade versions above.  It can also be purchased separately – see Repair Parts list.)
4. Nova 3 NovaTalk™ Upgrade Kit, including noise-cancelling microphone, PTT button, and padding for the Nova 3.
5. Nova 2000 NovaTalk™ Upgrade Kit.  Including noise-cancelling microphone, PTT button, and padding for the 2000.
6. NovaTalk™ R-Tex Headset with PTT, designed for high-noise applications, such as Pot Tender or hole watch.
7. NovaTalk™ R-Tex Headset without PTT, Headset-only version of above (Replacement or upgrade option only – requires PTT for operation.)

Note:  A separate Radio Connection Cable must be purchased to connect to your existing 2-way radio system. Note:  These systems are not rated Intrinsically Safe.  If Intrinsically Safe versions are required, contact us for availability and pricing.

AVAILABLE FOR RENTAL OR PURCHASE

• 375 cfm Compressor is suitable for 1 blaster
• PSI Range between 125-150psi
• Each compressor brand is different, so please request a quote.
• The 375 cfm air compressor is used extensively in the corrosion control industry. Excellent mobility and easily maintained.
• BlastOne sells both re-manufactured Tier 3 units and the most up to date Tier 4 units.

This Graco Stainless Steel Air-Driven Agitator features:

• Manually operated – Compatible with agitator speed controller
• Pneumatic Rotary Vane type
• Locking bolts to secure cover and reduce spills
• Ideal for wall mount pumps or spray packages
• Compatible with various lid types – a common configuration Graco 5-Gallon Pail Cover Agitator Kit is readily available.

• Comfortable elastic stretch fabric designed for Painters and Blasters
• Can be worn three ways (over nose, under nose, under chin)
• Close fitting design, ideal for wearing underneath a blast helmet or spray hood
• Helps keep the blast helmet more hygienic, by capturing body sweat
• Sold as a pack of 10 hoods
• Genuine Products – Manufactured by RPB Safety

• Seamless integration with Radex Airline Filter
• Precision-engineered for optimal airflow
• Corrosion-resistant brass construction
• Easy installation and secure fit

• Suits Black Max Fan (P-DCBMX)
• 1.8 HP
• 78cfm
• 3,000rpm
• Genuine GAST® part # 4AM-NRV-92

• Suits a Warrior 4000 Sprayer
• Stainless Steel Agitator and connection Kit
• Sold as a Kit which includes
  • Agitator
  • 1ft x 1/4″ poly tube and connections
  • Mounting Collar
  • Does not include the lid (suits Pail Mounted version)  If Lid is needed, see part GR197298.
• This agitator kit works with any of the Warrior 4000 sprayers
• #1 choice for when you are spraying zinc primers

• Replacement stud fasteners for Nova 2000 / Nova 3
• Durable materials
• Securely attaches helmet and cape
• Allows for quick and easy removal of helmet and cape

The Ultra Spray Airless Whip Hose (SKU: P-SPH06) offers enhanced flexibility and movement with its 6ft lightweight design. Fitted with safety spring guards, it’s the ideal choice for airless spray gun operations.

• Safety spring guards fitted to whip hose ends
• Lightweight, flexible hose makes spray gun movement easier for the operator
• 3300 psi hose is nylon braid, others are steel braid
• 6ft length

• 2 tons per hour of garnet/alox/ staurolite
• 4 tons per hour of steel grit.
• Requires three phase electric 480v, 30 amp
• Compressed Air Requirement 20 cfm @ 100psi
• Requires completely dry abrasive to operate.
• Will process garnet, steel grit, aluminum oxide, and staurolite.
• High-capacity bucket elevator resists jamming and economizes power consumption.
• Rotary trash screen design resists blocking and removes large trash.
• Air-wash removes fine wastes and is infinitely variable to remove exactly the amount you want.

• Suits RPB Z-Link ADF Shield (Auto-Darkening Filter) for welding (16-872)
• Used to protect the filter from damage and wear
• Pack of 10

Genuine Parts – Manufactured by RPB Safety

• Suits ASAP Shut off Deadman System and MistBlaster Pusherline
• Swing Check Valve is used to ensure that no air escapes into the control valves, back up the pusherline
• 1-1/2” (40mm) Full flow Valve to ensure minimal pressure loss
• Manufactured out of High quality brass – does not corrode.

• Suits 3M Half and Full Face Masks
• Used to attach the 6000 series filters with bayonet style fittings to 3m Gas/Vapor respirators and cartridges
• Sold Individually – each mask requires 2 adaptors
• 3M Part number 502 Adaptor
• Genuine Parts – Manufactured by 3M

• This Blast and Vacuum BRS system is built for high production vacuum blasting work.
• The Vacuum system, blast machine and airdryer are all mounted to one skid.
• The abrasive does not recycle which is ideal when you have very low dust requirements or when your specification calls for the use of virgin abrasive only.
• This system is 100% pnuematic and does not require any electrical power.
• Blast Pot capacity is 3.5 cuft.
• Blast upto 60 sqft / 6 sqm per hour
• Requires 750cfm of air

• Replacement Side Padding Assembly (16-520-S)
• Includes frames and pads

Genuine Product – Manufactured by RPB

One size fits all general purpose leather work glove.

• Generous length gauntlet for lower arm protection
• Abrasive resistant threads provides longer life than normal ‘welding gloves’
• Tough, suede finish provides additional gripping power
• Available by the pair with discounts in dozen and case (5 dozen) quantities.
• Also see BlastOne’s new BlasterAll Premium Leather Blasting Gloves

Interested in volume pricing? Chat or call us – we’re real people and are happy to help!

From the makers of the Nova Respirators! 

• GVS Half Masks are made from TPE and are hypoallergenic and non-irritating.
• Extremely lightweight and comfortable.
• Each mask includes the initial set of filters installed and is ready-to-use.
• Price shown per-each.  Packed 8 per case, with case discount.
• Multiple filter versions available as follows:
  • OV / P100. Removes Organic Vapors along with P100 filtration. Painters choice!
  • OV / AG / P100. Protects against organic, inorganic, chemical gases, and particulates.
    • Solvents
    • Chlorine and Chlorine Dioxide
    • Hydrogen Chloride and Hydrogen Fluoride
    • Sulphur Dioxide
    • Organic Vapors
  • Multi-Gas. Protects against organic, inorganic, chemical and ammonia based gases. All acid gases above, plus:
    • Ammonia
    • Formaldehyde
    • Hydrogen Sulfide
    • Methylamine
  • Multi-Gas / P100. Protects against organic, inorganic, chemical and ammonia based gases, and particulates.
  • Reuse your respirator over and over again with the standard-profile line of GVS replacement filters.
• NIOSH Approved TC-84A-8062.

NOTE – This is the standard profile series. Low-profile Elipse masks are also available.

As with all close-fitting respirators, these are designed to be used where fit-testing is conducted. The GVS Portacount Adapter is available to facilitate this testing.

From the makers of the Nova Respirators!

• GVS Half Masks are made from TPE and are hypoallergenic and non-irritating.
• Extremely lightweight and comfortable.
• Each mask includes the initial set of filters installed and is ready-to-use.
• Price shown per-each.  Packed 10 per case, with case discount
• Multiple filter versions available as follows:
  • Standard P100. These filters will remove up to 99.97% of particulates and contaminants down to 0.3 microns.
  • Standard P100 Starter Kit.  Same as above along with a hard carry case and extra set of filters included.
  • Enhanced P100 w/activated charcoal.  Designed to remove nuisance odors along with P100 filtration.
  • OV / P100.  Removes Organic Vapors along with P100 filtration.  Painters choice!
  • Standard P100 Source Control. Designed for healthcare market and reduces cost and waste as compared to N95 disposable masks.  Side exhaust valves removed.
  • Reuse your respirator over and over again with the low-profile line of GVS replacement filters.
• NIOSH Approved TC-84A-8062.

NOTE – This is the low-profile series.  Standard-profile Elipse Masks (which offers Acid Gas & Multi-Gas filter options) are also available.

As with all close-fitting respirators, these are designed to be used where fit-testing is conducted.  The GVS Portacount Adapter is available to facilitate this testing.

• Suits Guardian and MST CO Breathing Air Filter
• Replacement Complete Kit with all 3 filters
• Suggested replacement is every month
• Suits the BlastOne Guardian breathing air filter and carbon monoxide monitor
• Genuine Parts – Manufactured by Modern Safety Techniques

• Suits Graco King, Xtreme and most Airless Spray Pumps
• Designed to be mounted on an Airless Sprayer between the incoming air and the air regulator
• Lubricates the incoming air to extend the life of the air motor
• Sold as a Kit which includes;
  • The Lubricator
  • Adaptor Pieces to match the air regulator
  • Pins, O-Ring and Elbow fitting
• Genuine Parts – Manufactured by Graco

• Close fitting medium impact eye protection
• Most styles available with clear or tinted lenses – styles can vary
• A range of chemical safety goggles are also available:
  • Low profile, extremely lightweight, comfortable with unique ventilation system
  • Anti fog/anti scratch
• Sold as a box of 12
• Genuine Parts – Manufactured by Pyramex

• Service Kit for the 1-½ High flow and 2″ Auto Air Valve
• Used to rebuild the Auto Air Valve in the field
• Includes Gaskets, Diaphragm, Brass Washers, Breather vent and required lubricants
• Replace seals at the first sign of wear

• Genuine OEM adapter
• Air Motor Adapter Assembly for Binks / Devilbiss Agitator

• Suits TriTech 4200psi T93R spray tips
• Safety guard for help ensure you don’t inject yourself
• Large knurls assist grip when tightening
• Suits Graco Standard Airless Guns
• Sold Individually
• Genuine Parts – Manufactured by TriTech USA

AVAILABLE FOR RENTAL OR PURCHASE

• 185 cfm Compressor is suitable for a very small blaster or a spray pump
• PSI Range between 100-150psi
• Each compressor brand is different, so please request a quote.

AVAILABLE FOR RENTAL OR PURCHASE

• 1600 cfm Compressor is suitable for 4 blasters
• PSI Range between 150-200psi
• Each compressor brand is different, so please request a quote.

• Designed to hold warning signs on a jobsite.
• Light and easy to move, folds flat for transport
• Compatible with signs 24″ x 24″ and 24″ x 18″
• Swing Stand Sign Frame
• Sign Not Included – order separately

Replacement filter cartridges to suit GVS Elipse and Integra Low-Profile half masks.

• Standard P100. These filters will remove up to 99.97% of particles and contaminants down to 0.3 microns.
• Enhanced P100 w/ activated charcoal. Designed to remove nuisance odors along with P100 filtration.
• OV / P100. Protects against organic vapors and particulates.
• Prefilters.  Optional filters designed to extend the life of the OV filter.  Requires filter holder kit as shown.

NOTE – This is the low-profile series. The standard-profile series is available here.

Genuine GVS product.

AVAILABLE FOR RENTAL OR PURCHASE

• 750 cfm Compressor is suitable for 1-2 blasters
• PSI Range between 125-175 psi
• Each compressor brand is different, so please request a quote.

AVAILABLE FOR RENTAL OR PURCHASE

• 1300 cfm Compressor is suitable for 3 blasters
• PSI Range between 150-200psi
• Each compressor brand is different, so please request a quote.

AVAILABLE FOR RENTAL OR PURCHASE

• 900 cfm Compressor is suitable for 2 blasters plus a spray pump
• PSI Range between 125-150psi
• Each compressor brand is different, so please request a quote.

FREE Shipping

30 Day Money-Back Guarantee | Free Returns

90 Day Manufacturer Warranty

• Blasting rate up to 20 ft² per hour.  Due to this low production rate, this unit is intended for specialty applications, such as spot-work in dust-sensitive areas.
• Utilizes the TeraValve XL abrasive metering valve
• Compressed Air Requirement is only 185 cfm
• Has wheels and fork pockets for easy portability by hand, or by forklift.
• 100% compressed air powered – no electricity required
• Various workheads are available for flat surfaces, inside corners, outside corners, etc. – enquire for details.
• Genuine Products – Manufactured by Schmidt / Axxiom Manufacturing

The PX5 PAPR is approved for use with most of the RPB / GVS range of respirators.  Refresh or expand your PX5 using the filters and cartridges available below:

• Pre-Filters.  Extend the life of the main filters using these.  10 per pack.
• Spark Arrestor.  Essential when using the PX5 in certain applications.
• HEPA Cartridge Filter.  The workhorse High Efficiency particulate filter, provides maximum filtration (removes 99.97% of particulates down to 0.12 microns.)
• Organic Vapor and Acid Gas Cartridge Filter.  (HE/OV/AG.)  Label Color Code Yellow/Magenta.  The painters favorite.  Approved for the following gases:
  • Solvents
  • Chlorine and Chlorine Dioxide
  • Hydrogen Chloride and Hydrogen Fluoride
  • Sulphur Dioxide
  • Organic Vapors
• Multi-Gas / HE Cartridge Filter.  Label Color Code Olive/Magenta.  Approved for all the same gases as the OV/AG filter plus the following:
  • Ammonia
  • Formaldehyde
  • Hydrogen Sulfide
  • Methylamine

AVAILABLE FOR RENTAL OR PURCHASE

• 170HP T4 John Deere Diesel
• 2367 CFM, 28″ static pressure
• Mounted on 2-axle road legal trailer
• Will convey between 7-11 tons of abrasive per hour
• Primary Filtration – Coated Bags, pulse air cleaned
• Secondary Filtration – Pleated Cartridge
• Max Vacuum hose 5″
• Empty weight 10,500lbs
• Dimensions 7’5″ L x 8’5″ W x 11’2.5″ H

BlastOne has a complete line of fittings.  These are the Union Adapters, and among other things, the swivel end is ideal for connecting to a spray hose.

• Carbon steel (Other materials available).
• 4:1 Safety Factor

Need a size not listed? Chat or call us – we’re real people and happy to help!

FREE Shipping

30 Day Money-Back Guarantee | Free Returns

90 Day Manufacturer Warranty

• Versatile!  No need to have separate wet and dry blast equipment.  Wet blast or dry blast with a single unit
• Minimal water usage (less than 1 pint / ½ litre per minute) with proprietary Schmidt  technology that allows precise control of the amount of water injected into the air stream while blasting
• Abrasive tank is “dry” so there is no need to drain water to refill with abrasive. This creates a significantly cleaner job site and is more efficient
• Schmidt TeraValve™ XL abrasive metering valve offers precise and repeatable control of a wide range of coarse or fine abrasives
• Wide range of blasting pressure capabilities from 10 to 150 psi
• Toggle between wet blast, dry blast, wash-down and blow-off using a single control panel
• This version has a 3.5 C.F. capacity.  Other sizes are available upon request – enquire.

Genuine Products – Manufactured by Schmidt® / Axxiom Manufacturing

The SmartSPARK^TM Short Proof Deadman Control System is enhancing blaster safety in all blast operations.

Designed to address inadvertent activations caused by electrical shorts in deadman control lines, the SmartSPARK Deadman System keeps your blasters safe. The SmartSPARK Deadman and Controls has a closed loop system, that will detect an electrical short in the deadman line and shut off the blast pot instantly.

• Designed to quickly retrofit onto existing Schmidt blast pots with electrical deadman controls
• Reduces the likelihood of accidental start-ups by detecting and responding to electrical shorts
• 2 models avaliable – single outlet and 4-operator outlet.
• Ideal for blastrooms that have steel grating and blast sites where multiple operators are working simultaneously.

• Swiveling nut for easy fit-up – nut ‘locks up’ rigid when tightened (NPTFSW)
• Steel
• 4:1 Safety Factor

Need a size not listed? Contact us!

• Lightweight, portable, high efficiency fan
• 2000 cfm, 12″ fan

BlastOne offers all accessories and replacement parts for DeFelsko testing instruments.

As part of the PosiTector SST test process, deionized water must be injected under the patch.  These replacment dispensing tips are used with the PosiPatch magnetic rings and are available as replacements in this convenient package of 10 units.

MPN:  SSTDISPTIP

• Flame Retardant Face Seal (15-711)

Genuine Product – Manufactured by RPB

• Side Window Blockers, Solid Gray (15-821)
• Pair

Genuine Product – Manufactured by RPB

BlastOne has the parts you need to keep your Nova respirators in good working order.  This section shows the hygiene kits for the Nova 2000.

• The hygiene kit includes the head dome, side wings, and inner bib collar.
• Comes in 3 head sizes – Small, Medium (Standard) and Large
• Genuine Parts – Manufactured by RPB Safety

• Suits Binks 183S223 Air Motor on Pressure Pot
• Air Motor Repair Kit keeps you up and running
• Contains all the parts needed to get a faulty air motor running
• Sold as a kit
• Genuine Parts – Manufactured by Binks

• Suits MistBlaster Air Controls and PYTHON Pinch Valve
• Air Pilot Valve Controls Grit Valve by the signal air from the deadman controls
• Sold Individually

• Suits Air Motors and other Air operated tools
• Specially formulated to prevent oxidation, rust formulation and excessive wear in air operated motors, pumps or tools
• Designed for industrial use
• Sold Individually – 1 Pint bottle with easy to use cap
• Genuine Parts – Manufactured by Graco

• Suits Binks 2.8 gallon pot paint sprayer
• Supports air Pressure from 0 – 125 psi
• Max. Inlet pressure: 250 psi
• Max. Operating temperature: 150°F
• Air Inlet: 3/8″ NPT (f)
• Air Outlets: (3) 1/4″ NPT (f)

This glove delivers superior chemical resistance (including to MEK) and has the following specifications:

• 5-layer LLDPE laminated film, giving protection to solvents, chemicals, and microbes.
• Very thin – 2.4 mils – often worn with another glove on top to provide greater mechanical protection.
• Effective protection against the largest number of chemicals. See Documents tab for specific chemical protection chart.

Packaged 1 pair per pack with 72 pairs per case. Correct sizing will provide the greatest protection with these gloves.

• Power cable for the RPB L4 Blast Helmet Light (suits Nova 3 blast helmet – P-HLNV3) and GX4 Gas Monitor
• Manufacturer part #09-021

Ensure safety at the forefront of every project with the “Jobsite Safety Sign – Danger Signs for Worksites” (SKU: P-OPS). Designed to alert and warn personnel of potential dangers, this sign is crucial for maintaining a secure environment:

• Perfect for entry-exit points and site perimeters
• Made of robust Colorbond metal for lasting durability
• Dimensions: 24″ x 18″ (600 mm x 450 mm) – ensures high visibility
• Striking colors and lucid messaging (printed on one side) enhance clarity
• Features pre-punched fixing holes for easy installation onto fences or swing stand frames
• Safe design with small rounded corners
• Customize warning texts as per your needs – contact BlastOne for tailored messages

Popular warning options include “Abrasive Blasting In Progress”, “Spray Painting In Progress”, and “Lead Work Area Authorized Personnel Only”. Please note: sign frame sold separately. Discuss your precise requirements with your Area Manager to get the perfect sign for your site.

• Suits MistBlaster Wet/Dry Blast Machine
• Filters all incoming air that is going to the pneumatic control lines
• Ensures no moisture, dust or particles causes any issues in the control valves
• 3/8″ High Flow Air Valve
• Sold Individually

• DO NOT use for breathing air
• Industrial interchange fittings are 300 psi rated
• Brass or plated steel bodies with brass or steel valves
• Most commonly used in the USA

This knit glove is an excellent general purpose glove with good dexterity and grip. It has the following specifications:

• ANSI cut level 1
• NBR foam finish
• 15 gauge gray Nylon / Spandex knit construction
• Black palm dip

Priced by the pair, with quantity discounts available in dozen pair packs and also in 10 dozen cases.

This ultra thick glove features:

• 14 mil thickness, 12 inches long
• Fully textured for better grip
• Beaded cuff to ease donning
• Powder free

Packed in box quantity of 50 ambidextrous gloves (25 pairs).

• Exceptional spray finish quality
• Lightweight and robust gun
• Ergonomic design for operator comfort and control
• Air inlet swivel for ease of movement
• Unique replaceable PEEK or stainless steel needle tip reduces maintenance costs
• Superbly engineered with few parts – simple to disassemble for cleaning and service
• Convertible between airspray and compliant (HVLP models also available)
• Available in pressure feed, siphon feed or gravity feed setups with or without cups

• Suits TriTech 7500psi MAXX spray tips
• Safety guard for help ensure you don’t inject yourself
• Large knurls assist grip when tightening
• Suits Graco Standard Airless Guns
• Sold Individually
• Genuine Parts – Manufactured by TriTech USA

• Tappered EarPlugs for perfect fit
• NRR 32 db
• Packed in individual pairs
• Essential for wearing under a blast helmet
• Corded – Box of 100 pairs
• UnCorded – Box of 200 pairs
• Genuine Products – Manufactured by Pyramex

• Head Harness Bracket and Air Director (16-525)

Genuine Product – Manufactured by RPB

• Helmet Shell only (16-511)
• Suitable for Z-Link

Genuine Product – Manufactured by RPB

• Safety Lens (16-810-IR5)
• IR Tined Shade 5

Genuine Product – Manufactured by RPB

• Air Director (16-523)

Genuine Product – Manufactured by RPB

• 3/16″ Air Hose Union suits 3/16″ hose fitting for Clemco Deadman Twinline hose AHRMS4050C

• Cotton Drill / canvas material
• PVC dotted palm for improve grip
• Knit cuffs keep dirt and debris from entering the glove
• One size fits all

• Suits the Devilbiss JGA Standard Spray Gun
• Genuine Devilbiss product
• Replacement air cap only

This two-toned glove is constructed of neoprene and rubber, and is double dipped for added protection. It has the following specifications:

• 27 mil thickness – medium weight for greater protection against mechanical hazards
• Cotton Flock lined for sweat absorption
• Diamond-pattern finish for improved grip on both wet and dry surfaces
• Intended for plant maintenance, janitorial use, and general chemical handling. See Documents tab for chemical protection chart.

Priced by the pair, with dozen and case quantity discounts available.

This all-purpose knit glove offers excellent cut resistance with good dexterity and grip. It has the following specifications:

• ANSI cut level A6
• NBR foam finish
• 13 gauge gray HPPE (Steel / Nylon / Spandex / Polyester) knit construction
• Black palm dip

Priced by the pair, with quantity discounts available in dozen packs and also 10 dozen cases.

• Air Inlet Adaptor (16-519)
• Suitable for the Z-Link
• Genuine RPB Product

• Air Supply Hose (08-428)
• Use with GX4
• Genuine RPB product

• Air Supply Hose RZ Fitting (08-428-RZ)
• Use with GX4
• Genuine RPB product

• Durable silicone face seal provides flush, supple wearability and extends product life
• Cool Flow Valve allows for effortless breathing, heat reduction and moisture accumulation
• Standard and/or drop-down modes are made simple by adjustable dual-mode head harness
• Hard hat, weld/face shields are not a barrier with the 7585F fabric head cradle option
• NIOSH approved

• Made with formulation of thermoplastic rubber for greater comfort and stability
• Lighter and softer facepiece
• Includes Ultravue® lens
• AnthroCurv sealing surface conforms to wearer’s facial features
• MultiFlex system allows for equal pressure on the faceseal area

• Suits BABL3475 LED Blast Light
• Replacement Polycarbonate Inner Lens to protect the LED’s
• Recommend you also use Sacrificial Pyrex Blast Lens as well.
• Sold as a pack of 12 with 48 screws for installation
• Genuine Part – Manufactured by Western Technology

BlastOne has the parts you need to keep your Nova resipirators in good working order.  This section shows the replacement Head Domes (only)  for the Nova 2000.

Note:  We also stock the Nova 2000 Lining Kit which includes both the dome and the side wings

Comes in 3 head sizes – Small, Medium and Large

Genuine Product – Manufactured by RPB

• Used to clip the C40 heating/cooling tube to the belt to allow the blaster to wear the C40 comfortably around the waist.
• 1 belt loop and nut per package
• Manufacturer part number 03-538
• SAR climate control device
• Genuine part
• C40 series

• Tool used to identify the presence of water, oil or other contaminants in compressed air used for blasting and coating applications
• In accordance with ASTM D 4285 – attach a single piece of blotter paper to a solid backing using tape
• Paper can be marked upon with critical test information for later documentation and/or reference
• Pre-cut 6″ x 6″ pieces

Replacement side wings for the RPB® Nova 2000 AirFed Blast Helmet

• Superior air filtration
• Robust construction
• Easy installation
• Compatibility

Heavy duty personnel lift for use in a variety of applications by typically for paint.  Greatly improves safety and accessibility, meaning you can get painting or preparation jobs done quicker, safer, and allow greater throughput as well.

• Suits MegaFlow Bull Air Hose 1-1/2″ and 2″ (BHBULL38/50)
• 4-Claw Crowsfoot Bull Hose Coupling
• Supplied with FMCFG gasket fitted
• Always use HFCLP2 lock pins – order separately
• Rated for 150 psi
• Sold Individually

AVAILABLE FOR RENTAL OR PURCHASE

ABRASIVE RECOVERY VACUUM SYSTEM

• Will vacuum up to 8 ton/hour of garnet
• Requires 900cfm of air at 120 psi to operate
• Skid mounted abrasive recovery system, Pneumatically operated
• 4 Dust Collector Cartridges with filtration area of 904 sq ft.
• Automatic Reverse Pulse Cleaning
• Works best for dry media disposal

• Multi-purpose relief valves
• Male threaded ports
• Use on Blast Pots, or other Pressure Vessels including Airpigs distribution manifold, Air Receivers, and AirPreps

When Axxiom released the Thompson 2 valve, the benefits of Pressure-Hold technology were instantly upgraded by improved user experience over the Thompson I valve.  Details as follows:

• Improved servicability:
  • Body and cylinder are now 2 parts, providing easier removal of sleeve and plunger.
• Additional Seal protection:
  • Has 3 separate seals (versus the original 1), reducing dust migration and improving durability.
• Multiple Sleeve choices:
  • In addition to the original Tungsten Carbide and Urethane full-flow options, Axxiom has released additional options that help prevent over-consumption in various applications.
• Virtual Position Indicator:
  • Simplifies setting of the media flow rate.
• Cleanout:
  • Full 1″ port directly under the inlet allows cleanout without removing the valve.
• Size info:
  • Standard 1-¼” (32 mm) inlet thread
  • 4 choices of MNPT piping for pusher-line connection
    • 1″, 1-¼”, 1-½”, and 2″
• Options:  Make servicing the valve even more convenient with one of the following:
  • Union-End Ball Valve – The UEBV allows removal of valve without emptying the pot.
  • Tri-Clover Quick Connect – allows removal of valve without tools.
  • Combination UEBV and Tri-Clover – combines the benefits of both options at a reduced cost.

Meter your abrasive efficiently and conveniently with the genuine Axxiom Thompson II valve!

• Used for the handling of high-viscosity coatings
• Prime alternative to troweling
• Ideal for touchup jobs and/or difficult-to-reach areas
• 5-gal dual post ram provides ample down force to load pump
• 290 cc Xtreme lower designed specifically for heavy viscosity material
• Tool-less wiper plate removal for easy maintenance
• Durable, rugged cart allows for single-person maneuverability

• Electric
• No icing
• Reduced Noise
• Plug-in & Spray
• Hazardous Location approved
• Energy savings
• Pump type: Xtreme

• Suits 3M Half and Full Face Masks
• NIOSH Rated Organic Vapor Filter Cartridge
• Sold as a box of 60 filters (30 pairs)
• 3M Part number 6001
• Genuine Parts – Manufactured by 3M

• Keeps Abrasive grit and dust out of the controls of your blast pot
• Helps maintain valve response and speed
• Extends valve seal life
• Must have essential for any blast pot.
• Easy to maintain and clean
• Uses a 90 micron bronze element
• 1/4″ inlet fittings

The Blast Ninja nozzle is an option for reducing the noise of blasting in certain applications.  It offers price-leading economy for applications where production speeds are not critical. Product details are as follows:

• Sizes.  Comes in #4, #5, and #6 orifices.
• Threads.  Offered in fine or contractor thread in poly, brass, or aluminum threads.
• Liner options.  Available in tungsten carbide or extended-life silicon nitride.

• When your scaling hammer needs refreshed, we have the replacement parts you need. This is the Trelawny Valve Stem 618.3022.

AVAILABLE FOR RENTAL OR PURCHASE

• #1 Deadman in the industry
• Larger internal ports make it faster acting, making it a safer handle
• Compact, slimline design – 30% easier then other handles to hold down
• Simple to make in-field repairs as required
• Available as Electric or Pneumatic
• Geniune Products – Manufactured by Schmidt / Axxiom Manufacturing

• Face Shield Assembly (15-811)

Genuine Product – Manufactured by RPB

Replacement filter cartridges to suit GVS Elipse and Integra Standard-Profile half-masks.

• OV / AG / P100. Protects against organic, inorganic, chemical gases, and particulates.
• OV / P100. Protects against organic gases and particulates.
• Multi-Gas. Protects against organic, inorganic, chemical and ammonia based gases.
• Multi-Gas P100. Protects against organic, inorganic, chemical and ammonia based gases, and particulates.

NOTE – This is the standard-profile series. The low-profile series is available here.

Genuine GVS product.

• Suits Western Technology 3500 LED Blast Light
• Outer Lens protects the inside of the light from blasting ricochet
• Simple to replace. Unscrew the outer ring and slip in the lens
• Sold as a Pack of 12

MPN:  3509B

• Conventional
• 1.8mm nozzle with plastic gravity cup
• Even material distribution through the spray pattern for optimum coverage
• Improved transfer efficiency through reduced air consumption
• Enhanced atomisation through material-specific air caps
• Well balanced and lightweight (410 grams) gun makes it easier to spray at a steady rate all day
• Ultra-light trigger pull reduces operator muscle stress
• Ergonomic gun handle provides a comfortable grip
• Rounded control knobs for operator comfort
• Optimise spray performance with cutting-edge air cap and nozzle design

AVAILABLE FOR RENTAL OR PURCHASE

• MegaFlow heavy duty air supply bull hose
• Fitted with your choice of industrial fittings
• Fitted by Trained and Certified BlastOne Technicians
• Rated to 300psi with 3:1 safety factor
• Always use with safety whipchecks

The Auto Air Valve (aka Gatekeeper) is the recommended control valve for a pressure-hold blasting system.  It is safer and superior to a pinch valve system.  Further details as follows:

• Rugged, compact design
• Typically used in conjunction with the Thompson Valve
• Low pressure drop across valve – increases production
• Multiple sizes available.
• Retrofit systems are available to convert pinch valve / donut valve systems to safer and more efficient Auto Air valve systems – see options below.

BlastOne has the parts you need to keep your Nova respirators in good working order.  This section shows the replacement interior lining kit for the Nova 2000.

• The lining kit includes both the Head dome and side wings
• Comes in 3 head sizes – Small, Medium (Standard), and Large
• Genuine Parts – Manufactured by RPB Safety

The Bullard 20TIC Hood is specifically designed for use with hard hats, airline systems, or Powered Air Purifying Respirator (PAPR) blower assemblies. Crafted from Tychem QC for robust splash protection against a spectrum of chemical agents, this hood is ideal for applications in chemical/pesticide handling, spray painting/coating, and nuclear operations. Featuring a wide-angle lens for unparalleled visibility, a patented inflatable neck cuff for enhanced comfort and protection, and NIOSH certification, this durable yet economical hood meets the rigorous demands of industrial environments.

• Compatible with hard hats, PAPR, or Supplied Air Respiratory Systems
• Made from Tychem QC for superior chemical splash protection
• Wide-angle lens for industry-leading visibility
• Patented inflatable neck cuff design for comfort and airflow
• Reusable yet economical for varied application needs
• NIOSH certified for safety and reliability

When your RPB coating respirators need refreshed, we have the parts you need.  This group includes the replacement Tyvek® capes/hoods.

• For both T-Link and T200 versions:
  • Tychem® 2000 Full-Length Hood, MPN 17-712
  • Tychem® 4000 Full-Length Hood w/sealed seams, MPN 17-713
  • Tychem® 4000 Extra-Long Hood w/sealed seams, double-bib, and waist straps.  MPN 17-713-SX
• For T200 version only:
  • Tychem® 2000 Face Seal, MPN 17-722
  • Tychem® 2000 Face Seal w/Shoulder-Length hood, MPN 17-732
• For legacy T100 version only:
  • Tychem® 4000 Full-Length Hood w/ sealed seams, MPN 07-150

How do Tychem® 2000 and 4000 materials compare?

• Tychem® 2000 is rated for light liquid splash applications and protects against over 40 chemicals.  This version is most commonly used in industrial painting applications.
• Tychem® 4000 is also rated for light liquid splash applications and protects against over 100 chemicals.  RPB constructs their 4000 hoods with sealed seams for even greater protection.

Note:  Keep your vision clear during coating projects by using an appropriate  RPB Tear-Away Lens System.

• #1 Fastest Suction Blast System Available
• Uses an Abrasive Pick-Up Tube and flexible Hose to mix abrasive with the airstream
• To set up, simply slide the pick up tube into your bag of abrasive, connect your compressed air and pull the trigger
• Comes with a fixed orifice ¼’ Airjet and ½’ Tungsten Carbide nozzle
• Can be used with any media, right out of the bag
• Ideal for where air supply is limited or for small jobs where setting up conventional pressure blast machine is a nuisance
• Uses between 40-120 cfm of air – the more you have, the faster you blast.
• Sold as a Kit including the gun, nozzle and pick up tubes
• Also referred to as a bag blaster
• Genuine Product – Manufactured by Clemco

• 3/8″
• Brass composition

FREE Shipping

30 Day Money-Back Guarantee | Free Returns

90 Day Manufacturer Warranty

• Abrasive holding capacity of 3.5 cu ft
• Blasting rate up to 40 ft² per hour
• Compressed Air Requirement 750 cfm
• Includes fork pockets
• Can be wheel mounted for increased jobsite maneuverability
• Recirculating full size blast & recovery unit
• 100% compressed air driven – no electricity required

Genuine Products – Manufactured by Schmidt / Axxiom Manufacturing

For rental or purchase

Discover the reliability and efficiency of Bullard Filters and Cartridges for EVA and EVAHL PAPRs, SKU: P-BLDFILTER. Optimized for safety and performance, these filters are essential for maintaining clean, breathable air in industrial environments.

• High-Efficiency HEPA Filters (6-pack) for optimal particulate filtration.
• Combination HE/OV Cartridge Filters (6-pack) for organic vapor protection.
• Combination HE/AG Cartridge Filters (6-pack) tailored for acid gas environments.
• Pre-Filters for OV Filter Cartridges (120-pack) to extend main cartridge life.

Ensure uninterrupted protection with easy-to-change cartridges designed for consistent airflow.

• ASAP Safety System Retrofit Kit for 12V DC Thompson® Valve system.
• This System changes the depressurization flow of the air in the blast hose
• Allows a 200ft blast hose to depressurize in less than 1 second
• Changes the depressurization flow to exit backwards through full porting vs having to exit out of the blast nozzle
• Saves Seconds – Saves Lives, if a blaster drops a hose every micro-second counts, it takes the energy out of the hose immediately.
• Sold as a complete kit to be added on to an Electric Controlled Thompson® Valve Blast Pot
• Genuine Products – Manufactured by Schmidt® / Axxiom Manufacturing

• Suits Nova 3 Blast Helmet
• Used to protect the operator from any inward leakage of dust or abrasive
• Each cape comes with an inner bib for added protection and comfort
• Available Configurations:
  • 28″ or 38″ Leather Cape
  • 28″ or 38″ Nylon Cape
  • Blast Jacket (XL or XXL)
  • Hibernia / Long Sleeve
• Sold Individually
• Genuine Parts – Manufactured by RPB Safety

• 12V power supply with 4-pin connect
• Intelligent charging technology
• Universal compatibility
• Multiple charging modes
• LED indicators
• Built-in safety features

The Vision-Link™ light is compatible with the GVS / RPB T-Link, Z-Link, and Z4 respirators.  Features / Specifications include:

• Adjustable LED Lighting – up to 650 lumens
• Easy Installation – no modification is required
• Rechargeable battery

Upgrade your needle scaler with the Trelawny Copper Beryllium Needles, 3mm, SKU: HT4531310. These spark-resistant, flat tip needles are essential for specialized applications, ensuring safety and efficiency.

• 3mm flat tip design for precision work.
• Made from Copper Beryllium for spark resistance.
• Box contains 100 durable needles.
• MPN: 453.1310.

Ideal for environments where spark prevention is crucial, offering both reliability and performance.

• Used for blasting pipe internals with 3″-12″ ID
• Blasts in a 360 degree pattern
• Units come standard with Tungsten Carbide deflector tip
• Select the unit that will best match your Air Supply:
  • IPC4000, 1/2″ Throat Nozzle: 250 cfm
  • IPC4500, 5/8″ Throat Nozzle: 400 cfm
• Order Transport Carriages separately as follows:
  • IPC4100, Collar and Button, for 3″-5″ ID
  • IPC4200, Scissor, for 5″-12″ ID
  • Requires BSP (not NPT) threaded coupling to attached to standard blast hose coupling, part number HFSTC1BSP, available here or under the repair parts tab below.
• Successful Internal Pipe Projects require some specialist knowledge – contact our team for assistance
• Note:  This product is similar to the Clemco Hollo-Blast

• Can be used with most recyclable media
• Latest technology in on-site abrasive recycling, with enhancements made for garnet applications
• Processes up to 7 tons per hour of garnet
• Electrical Requirements 480v, 3 phase, 30 amp
• Compressed Air Requirement of 25 cfm @ 125psi
• Note:  Abrasive can be recycled only if it is totally dry

• BABL3070 / BABL3070L – an economical Blast Light option
• Typically mounted directly behind the blast nozzle to give the blasting operator light where he is blasting.
• Comes with 10ft bare cable, order a Electrical connector separately
• Low voltage 12 volt operation for operator safety
• Uses 20W Halogen light bulb

• Replacement brake housing for RotorBlast Internal Pipe Blasting Tool

• Vacuum Powered Steel Grit Recycler designed for onsite clean up and recycling
• Capacity up to 50 tons per hour of steel grit
• Skid Mounted, can be used in portable and fixed installations
• Integrated vacuum recovery for clean up and automatic abrasive cleaning tower
• Recycled abrasive is deposited directly back into your abrasive storage hopper
• (2) High-capacity 6” vacuum inlets for entry of recovered abrasive with 8” connection ports to vacuums
• Adjustable magnetic drum separator for fine tuning of abrasive size

IN-STOCK READY TO SHIP

• Combines inlet and exhaust valve functions
• Full-ported, 1 -¼ (32 mm) thread, inlet side
• Pneumatic operation requires 60psi to close exhaust valve
• Rugged, compact, non-corrosive design
• Simple installation and repair
• Twin line hose connection
• Combined position construction
• Large internal passage for increased blasting abilities

RENT or PURCHASE this surface preparation work-horse! The next-generation V700 VertiDrive. Boosting performance and profits on large blasting projects.

Purchase pricing is typically between $125,000 and $204,000, depending on configuration.

BlastOne can provide on-site training and ongoing support to ensure maximum productivity from Day 1.  Schedule a call with our SMEs to calculate and expected ROI for your next project.

• Faster Production.  Now holds up to 3 nozzles and each nozzle is up to 30% faster than the best hand blasting.  Highest productivity of any robotic blasting system!
• Cleaner Surface.  Provides consistent blasting quality by adjustment of equipment speed to the specific surface needs.
• Safer.  Remote control operation removes the operator from harms way.
• Capable.  Boosted magnetic performance allows standard operation on carbon steel surfaces that are horizontal, vertical, and now even upside-down!
• Versatile.  The V700 can be configured in 3 ways:
  • Abrasive Blasting.  Can blast either wet or dry.
  • Ultra High Pressure (UHP) coating removal.
  • Power Wash surface cleaning.
• Reduced Cost-of-Ownership.  The VertiDrive V700 has the lowest maintenance cost of any blasting robot.
• Looking for more information? Click here to read more…

Note:  We recommend that this equipment be used on large, flat surfaces (like tanks or ship hulls) and can deliver cost savings on projects as small as 10,000 square feet.  Not all medias can be used with the VertiDrive. Can be used with existing blast or UHP equipment, or BlastOne can provide new and updated equipment.

The BAABS deadman assembly works on all sizes of blast hose.  To facilitate the various hose diameters, a hose adapter set is required.  Each adapter set includes 2 grippers (2 sets are used per BAABS) and is offered in the following sizes:

• M1, for HE1 nozzle holder (1″ whip OR 3/4″ 4-ply hose)
• M2, for HE2 nozzle holder (1-1/4″ whip OR 1″ 4-ply hose)
• M3, for HE3 nozzle holder (1-1/2″ whip OR 1-1/4″ 4-ply hose)
• M4, for HE4 nozzle holder (1-1/2″ 4-ply hose)

NOTE – set sizes M2, M3, and M4 are INCLUDED with each BAABS system purchase.  Size M1 available at additional cost.

• Suits ATEX Trelawny SF11 Scaling Hammer (HT159593)
• Genuine part – manufactured by Trelawney
• Sold individually

• Efficient cooling with Aftercooler 2” 400 CFM
• Pneumatic Fan for rapid heat dissipation
• Durable construction for long-term reliability
• Compatible with various pneumatic tools
• Prevents damage and improves efficiency

• Magnifying Lens Holder Assembly (16-875)

Genuine Product – Manufactured by RPB

• Designed and manufactured to meet the current Spray Booth Standards – AS4114
• Most booths are customised to individual needs from modular constructions
• Can incorporate any type of draft system
• Heavy duty door design ensures long life
• 12 month warranty

Portable Sponge-Jet® feed units (aka Sponge Pots) come in a variety of configurations to suit almost every application.  From small, value-based units to fully featured machines, sponge feed units are designed for the ultimate in low-dust abrasive blasting. Seven configurations are available, as follows:

• RASP Xtreme™ 3:
  • Highly portable & fits thru a 24 inch manway
  • Holds 1 bag of new sponge media (5-7 minutes)
  • Includes pressure relief valve (PRV) & integrated wheels
  • Great for spot work
  • 127 lb. empty weight
• 100-HP Feed Unit™:
  • Great balance between size, cost & blast time
  • Fits through a 30″ doorway
  • Holds 3 bags of new sponge media
  • Includes PRV, secondary moisture separator & wheels
  • Great for preservation work
  • 480 lb. empty weight
• CG Series (Contractor Grade Series):
  • 2 sizes available:
    • 170-CG – holds 5 bags of new sponge media
    • 470-CG – holds 13 bags of new sponge media
  • Value series – ideal where few features are required
  • Includes fork pockets
  • Great for yard work
  • 600 lb. / 1142 lb. empty weights for 170-CG / 470-CG
• SJ Series (Feed Unit Series):
  • 2 sizes available:
    • 170-SJ – holds 5 bags of new sponge media
    • 170-EX – similar to 170-SJ, but ATEX 2 rated for potentially flammable environments
    • 470-SJ – holds 13 bags of new sponge media
  • Fully featured, includes:
    • Pressure relief valve
    • Secondary moisture separator
    • Muffler
    • Frame w/casters and lifting lugs
    • Centralized controls
  • Great for field work
  • 900 lb / 1000 lb / 1515 lb empty weights respectively

All new feed units come with choice of WEV or Saber nozzle.  We recommend the Saber nozzle due to it’s much higher value.  In addition, optional equipment such as the manifold/moisture separator, the vacuum drums, etc. are less costly if purchased when a feed unit is purchased.

Note:  Due to our distribution agreement with Sponge-Jet, pricing is not shown on our website.  Contact us for fast, competitive pricing or send in the web-form quote request.

When your Scaling Hammer needs refreshed, we have the replacement parts you need. This is the Trelawny Cap Valve (615.3021).

• Multi-purpose inline ball valve
• Plated brass corrosion-resistant body
• Full bore design for maximum airflow
• Rated for use up to 600 psi
• Female NPT threaded ports
• Sold individually

• Weld Visor Assembly (15-812)
• Includes Welding Lens Retainer (16-672) and Side Window Blockers (pair) (15-821)

Genuine Product – Manufactured by RPB

• Weld Visor Spring (15-879)
• 5 Pairs

Genuine Product – Manufactured by RPB

The GX4 is a smart, sophisticated gas monitor designed to keep your employees safe and your company compliant with breathing air safety standards.  Features as follows:

• Capable.  Monitors up to 4 gases simultaneously, including CO (carbon monoxide), O2 (oxygen), and HS2 (hydrogen sulfide) using the GVS Cartridge Sensors.
  • Note:  Unit comes standard with the CO cartridge only. Cartridges never need calibrating and last up to 2 years.  Regular calibration checks to be performed by using the GVS / RPB GX4 Calibration Regulator Kit.
• Intelligent. Continuously logs real-time data such as gas concentration, air temperature, unit status, etc.
• Connected.  Utilize access to your company’s network or connect directly with your device using the built-in Wi-Fi Hotspot mode.
• Flexible.  Powered by either a 12 volt vehicle battery clips (using cable with battery clips) or by a rechargeable Lithium battery.
• Safe.  Built-in 103db alarm demands attention when unit detects the contaminants above the programmed levels.  For the ultimate in safety, choose the version with RZ fittings.  The RZ fittings are designed to work only with GVS / RPB breathing air equipment and cannot be accidentally connected to shop nitrogen lines.  Note:  Using RZ fittings will require use of breathing air line and respirators with these fittings as well.
• Customizeable.  The following options are available:
  • GX4 Heavy Duty Field Case – protects your investment when your projects are remote.
  • GX4 Auxiliary Strobe Light / Alarm / Cable
• Can be surface or wall-mounted using the GX4® wall bracket – or mounted directly to an RPB® Radex Airline Filter.
• Genuine Product – Manufactured by GVS/RPB® and NIOSH approved with the Radex Breathing Air filter.

AVAILABLE FOR RENTAL OR PURCHASE

The GX4 is an accurate and sensitive gas monitor which is fully NIOSH certified for the GVS / Nova family of respirators when paired with the Radex breathing air filtration system.

One unique feature that GX4 has is the factory-calibrated gas cartridge sensor system.  These cartridges do not require field calibration but due to their long life (up to 2 years), their calibration must be checked regularly (recommend once per month).

BlastOne offers various calibration-check packages, along with separate gases and related parts.  These include:

• Packages.  These come with the following:
  • The applicable flow regulator,
  • One bottle of Zero air, and
  • One bottle of the respective gas.
• Flow Regulators.  Separate calibration flow regulators are available in either the Carbon Monoxide type or the Hydrogen Sulfide type.
• Gases.  Standard canister bottles of calibration gas are available separately in the following types:
  • Zero Air
  • Carbon Monoxide 20 PPM
  • Hydrogen Sulfide 20 PPM

NOTE.  Calibration gas is considered HAZMAT for shipping purposes and cannot be shipped by overnight air.  Please allow enough delivery time for regular ground UPS shipment.

We have the accessories you need for your RPB respirators.  This unit mounts inside the helmet, helps protects your operators hearing, and mitigates the concern that they may not use ear plugs.

• Excellent noise reduction
• Designed for Z-Link/T-Link systems
• Easy adjustments
• Convenient foldable design
• Sleek and stylish appearance
• Includes HAZ18535 mounting bracket

• Safety Lens (15-878)
• Pack of 10

Genuine Product – Manufactured by RPB

• Safety Lens (16-810-YT)
• Yellow
• Anti-Fog / Anti-Scratch

Genuine Product – Manufactured by RPB

• Suits 50 gallon and 275 gallon water tanks
• Air Operated, Double Diaphragm, Pneumatic Pump – used to Pump water from a water tank to a MistBlaster
• Allows you to have a mixing tank for HoldTite mixture with water when Mist or Vapor Blasting
• Max Working Pressure 100psi
• Free Flow delivery of 7.0 gallons per minute
• Maximum suction height is 12ft
• Air consumption is only 6scfm
• Pump comes complete with water fittings and air fittings
• Genuine Parts – Manufactured by Graco

GVS offers a N99 disposable mask – more effective against airborne contaminants than a N95.  These masks (aka filtering facepieces):

• Are Made in USA!
• Are individually polybagged, then packed in boxes of 15.
• Remove up to 99% of particulates down to 0.3 microns
• Have 99.9% bacterial filtration efficiency
• Have vertical folded design with an adjustable nose clip
• Come with 2 buckles w/4-point adjustable straps
• Are latex free and have a comfort seal
• Are designed for Healthcare and Pharmaceutical applications to protect against particulates and airborne hazards.
• Priced per pack of 15 with case discounts available
• Have full NIOSH 84A-9111 approval

Production work-horse for big dry-blast projects!  Save time and money when doing large projects.

• Industrial Quality & Design – Manufactured by Schmidt to BlastOne specifications
  • Long-life TeraValve metering valves – typically 4-outlets
  • High flow plumbing virtually eliminates pressure drop
• Huge abrasive capacity – Up to 160 cubic foot (aka 8 ton pot) holds half a truckload of garnet!
• Flexible configuration – Available with:
  • Highway Trailer
  • Yard Trailer
  • Skid mount
  • Shipping Legs (for mounting on your own equipment)
• Latest Generation Safety features
  • Halok closure – impossible to open under pressure
  • CEN muffler – reduces noise AND prevents freeze-up
  • Anti-slip ladder rungs
• Available Performance Enhancing Options
  • Bulk Bag Loading Rack – enhances safety while loading
  • Hybrid – attached dryer saves space & setup time
  • Vacuum loading – saves wait time for cranes where forklift loading of abrasive is prohibited
  • Hour meters – management tool monitors nozzle time

Favorite for use with the VertiDrive robots! Rent or purchase.  

30 Day Money-Back Guarantee | Free Return | 90 Day Manufacturer Warranty

Note:  Designed to be used with a 1600 CFM dryer, available here.

• Easy Installation: Quickly and effortlessly install the Radex Filter Bolt & Nut Replacement Kit
• Reliable Filtration: Effectively captures and removes airborne contaminants, ensuring a clean and safe breathing environment
• Enhanced Air Quality: Restore the effectiveness of your filtration system, preventing the entry of harmful particles

• Pneumatic Complete Retrofit kit includes:
• Triple-line coupled remote control hose
• Control hose connections for air supply
• Auto air valve and Thompson Valve II metering valve
• Pneumatic push-pull abrasive on-off switch
• Response deadman handle

• Pneumatically operated via twinline hoses
• Compatible with all twinline pneumatic remote control systems
• 1/4″ and 1/8″ air supply threaded connectors
• Operate by pulling down the safety flap and hold the large handle down

Upgrade your Breather Box with the “Replacement Filter Kit for Breather Box BB50” (SKU: AFBB50FK). Specifically tailored for the APCMBB50 with a 50 cfm capacity, this kit ensures efficient filtration and prolonged equipment life:

• Designed for Breather Box APCMBB50 50 cfm
• Comprehensive filter kit for top-tier air purification
• Assured quality with genuine parts manufactured by Air Systems
• Sold as a complete kit, providing all necessary components in one package

Invest in genuine replacement parts to maintain the efficiency and longevity of your Breather Box BB50 series.

BlastOne supports Bullard industrial respirators with the consumables and parts required to keep them serviceable.

This replacement belt includes the buckle, and is designed for Bullard respirators with cooling tubes.

• Highly effective filtration system
• User-friendly installation process
• Long-lasting and reliable performance
• Promotes healthier air quality

The latest innovation in deadman safety technology from Axxiom – the BAABS (Blasting Accessories and Assist Bracket System). Intended to be the safest deadman on the market, it mechanically prevents inadvertent activation. Configurable as follows:

• Available sizes
  • Subcompact.  Shortest version, intended for use in extremely tight spaces, blasting nooks & crannies, etc.
  • Compact.  Designed for general purpose blasting, it is capable of being used in all but the tightest of spaces. This model BAABS is now standard in all new Axxiom Schmidt blast equipment except the 0.9CF Mini Blaster and all BRS units.
  • Short Rail.  Also designed for general purpose blasting, the Short-rail BAABS is the middle-size unit.
  • Long Rail.  Ideal for large, flat wall areas and allows the operator to step back from the surface.
  • 2XL.  The longest BAABS of all!  Virtually eliminates the back-breaking task of bending over to blast tank floors.
• Switch options.  All BAABS use a G3 trigger deadman with the option of either electric or pneumatic operation.

All BAABS units are capable of being fitted with the BAABS blast light subassembly for improved vision in dim or dusty environments.(Note:  When the light is used with the Subcompact BAABS, there is not room for the thrust brace.)

The Bristle Blaster® is a portable surface preparation tool that combines wire wheels with an ingenious accelerator bar*, to speed production. Benefits include the following:

• Excellent for spot work.  Small projects such as rework, weld cleaning, etc., are faster due to no abrasive cleanup needed.
• Highly portable.  Light weight and compact makes usage and storage a breeze.
• Simple to use.  No need to suit up to use it.
• Quick setup.  Plug in and go!
• Safe for most surfaces.  Unlike a grinder, the Bristle Blaster® creates a surface profile without removing metal.

While the production speed isn’t as high as traditional abrasive blasting, the benefits of no mess and quick setup/teardown make this a very efficient tool for spot work and repairs.  It is up to 10x faster than using a hand wire brush. The Bristle Blaster® tools are available in 3 power configurations:

• Electric.  Requires 910 watts at 120v.
• Pneumatic.  Uses standard shop-air line.  Requires less than 20 CFM at 75 or 90PSI.
• Cordless.  Rechargeable battery power offers the ultimate in portability.

There are 3 orientation configurations for the wheels, as follows:

• Standard wheel (general purpose)
• Double wheel  (faster production for larger surfaces).  Note – available in electric only.
• Axial (right angle) wheel (great for reaching inside corners or other areas difficult to reach with the standard wheel).  Note – available in pneumatic only.

Additional notes:

• These units create a surface profile between 2.5 and 3.5 mils.
• Wire wheels are also known as belts.  BlastOne stocks all carbon steel and stainless Bristle Blaster® replacement belts.
• The standard pneumatic kit includes a dust shroud for attachment to a vacuum cleaner, for even faster clean up.
• Other belt types and machine models available – enquire.

*The Axial version does not come with an Accelerator Bar.

Designed for the Z-Link and T-Link respirators, the optional Comfort-Link™ padding system offers highly flexible fit control.

Genuine Product – Manufactured by RPB

• Heavy-Duty Battery Charging Clamps – Bare
• Insulated Vinyl handles for your safety
• 80 Amp capacity, suits 12/24V DC batteries
• 14 to 18 AWG
• Sold as a pair – Black/Red

The Thompson I Valve was invented by Bob Schmidt and was instrumental in causing the popularity of pressure hold technology.

• Pressure-hold systems retain the pressure in the blast pot until the deadman handle is depressed.  This reduces abrasive and energy waste.
• The Thompson I offers fine control for abrasive metering
• It comes in 3 nipple size configurations:
  • 1 ¼” (32 mm) x 1 ¼” (32 mm)
  • 1 ½” (38 mm) x 1 ½” (38 mm)
  • 2″ (50 mm) x 2″ (50 mm)
• Threaded-plunger metering design with air actuated operation
• Fits most sand blast hoppers, blast pots or abrasive blasting machines
• Genuine Parts – Manufactured by Schmidt® / Axxiom Manufacturing

Note:  The Thompson I valve, while still available, has become less common. The more modern Thompson II valve or state-of-the-art TeraValve are more popular and can replace the Thompson I without any modifications.

This kit includes all parts needed to change from blasting to blow-off at the flip of a switch at the deadman. Eliminates need for a separate air-hose or trekking back to the pot to shut off the abrasive.

This version is for pots with an existing Thompson 2 valve and pneumatic controls.

• Designed for offshore and chemical plants
• Foldable mast for easy access to narrow passages and through standard doors
• Working height of up-to 14′ 9″ high
• Pneumatically operated for safety in explosion areas like paint booths
• CE, CAS, and UL certified, ATEX compliant

• Replacement Lower with built-in filter
• Retrofit an Xtreme pump lower to an existing old-style King or Bulldog air motor
• Improved performance especially with higher pressures 45:1, 56:1, 68:1, 80:1 ratios
• Reduced solvent usage quicker and easier to flush
• Extended life component
• Fast, simplified servicing with quick knockdown intake valve and cylinder

AVAILABLE FOR RENTAL OR PURCHASE

• Capacity of 4 tons of garnet
• Designed to sit between the VacuLoad and the vacuum head
• Separates abrasive and 90% of dust for reuse or disposal
• Available in 3 sizes – 20, 55, and 100 cu.ft
• Acts as a cyclone separator using power from the main vacuum unit
• No need for compressed air or electric power
• Ideal for abrasive storage

• Suits Nova 2000 and Nova 3 Nova Talk Communication systems
• Push-to-Talk large button to enable easy communication
• Mounts to belt clip with 360 degree swivel
• Connects between the Nova Talk cable and Radio Cable
• Sold Individually, and also included in R-Tex 09-916 High Noise Headset pacakge
• Genuine Parts – Manufactured by RPB Safety

The GVS / RPB Z-Link is the most versatile respirator, and the cape selection offers a version for almost any application, with Fire Resistant, Aluminized, and Tychem options.  Below are the various versions that are available.

• Zytec FR Face Seal (mpn 16-711)
• Tychem 2000 Face Seal (mpn 16-712)
• Zytec FR Shoulder Cape (mpn 16-721)
• Tychem 4000 Shoulder Cape (mpn 16-723)
• Aluminized Shoulder Cape (mpn 16-724)
• Zytec FR Chin Seal (mpn 16-731)

Our latest generation Mega MistBlaster offers both wet and dry blasting for the ultimate in flexibility!  It reduces costs and time when doing large projects and offers the following:

• Versatility.  4 functions available at the flip of a switch:
  • MistBlasting / Wet (slurry) Blasting
  • Traditional Dry Blasting
  • Wash-down mode
  • Blow-off mode
  • Each outlet is independently controlled, giving even greater versatility.
• Capability.  With its 4 outlets, this workhorse can power up to 4 operators OR a VertiDrive robotic blaster and manual blasting simultaneously.
• Huge capacity – As typically configured with 160 cubic feet (aka 8 Ton), this bulk pot holds half a truckload of garnet.
• Mount Options as follows:
  • Highway Trailer
  • Skid Mount
  • Shipping Legs (for mounting on your own equipment)
• Available Cost Saving Option – We can convert your existing Schmidt® Dry bulk pot with to our Mega MistBlaster with our retrofit package. Available as a Limited version (without metering / air valves, for new pots) or as a Full version (with all valves, for used pots).

More options and features shown under the description tab. Available for Purchase or Rental. Ask about a demo! Note: Designed for use with a 1600 CFM dryer, available here.

The Warrior conventional spray pump (aka Graco® Triton) is a popular upgrade to pressure pots.  Most see the following benefits:

• Saves money. Reduces solvent use by up to 75%.
• Saves time.  Cleanup is up to 3 times faster.
• Easy to use.  Allows you to watch how much coating you have remaining in the can.
• Versatile.  Can be configured to support 2 operators.
• Specs can be found on the Description and Documents tabs
• Kit comes with 1.4 mm AirPro Spray Gun and 25 feet of Twin Air/Paint Hose
• Available as Pail Mount, Stand Mount, Cart Mount, or Wall Mount
• Optional Agitator available to use when spraying zinc
• Optional Upfit Kit available allows a single pump to do double duty by allowing 2 operators

• Suits Vacuload Vacuums and Schmidt Eductor
• Nozzle rated to 350 cfm input air
• Long Lasting, if filter is installed before eductor it will last almost forever
• Sold Individually

The PosiTector® DPM – DeFelsko’s solution for measurement of climatic conditions for industrial coating applications.  Versatile and capable, these environmental measuring instruments have the following highlights:

• Familiar.  Built on the tried-and-true PosiTector® gauge/body platform design with interchangeable probes.
• Capable.  Measures and records environmental conditions including:
  • Relative Humidity (RH)
  • Air Temperature
  • Surface Temperature
  • Dew Point temperature
  • Surface/Dew Point Delta
  • Wind speed (one model only)
  • Wet-Bulb (when used with Advanced Bodies only)
• Configurable.  Available as probes-only (to use with an existing gage/body), or in packages with a new gage body, these DPM probes are available as:
  • DPM Integral, with direct-contact surface thermometer
  • DPMIR Integral, with infrared surface thermometer, for use on moving parts, very hot parts, etc., where direct contact is not possible.
  • DPMS Integral, with cabled, magnetic surface temperature sensor for continuously logging surface temperatures. Also available for this model are 2 options:
    •  A liquid temperature probe, for measuring paint temperature prior to application
    • A hand-held surface temperature probe, for spot-checking hard-to-reach areas.
  • DPMA Integral, with all standard features plus a wind-speed indicator
  • DPMD Cabled, with ½” NPT threads for insertion into pipe and other areas that can’t be accessed by other versions.

Note:  The PosiTector® DPM L is an autonomous version, and can be attached independently to steel for longer-term climatic condition recording.

Sponge-Jet offers a robust repair kit for each of their recycler models. Pictured are the kits for the 35 series units (other series kits are similar with the appropriate substitutions).  Included items are as follows:

• Electric Recycler kits:
  • Electric motor
  • Flexible coupling
  • 4 flat gaskets
  • 2 clamps
• Pneumatic Recycler kits:
  • Air motor
  • Lubricator
  • Moisture separator
  • Muffler
  • Filter
  • Flexible coupling
  • 4 gaskets
  • 2 clamps

Note:  Due to our distribution agreement with Sponge-Jet, pricing is not shown on our website.  Contact us for fast, competitive pricing or send in the web-form quote request.

• Replacement kit for RPB® Radex Breathing Airline Filter
• Sold as set of 2 rings

• Suits 3M Half and Full Face Masks
• NIOSH Rated Organic Vapor Filter Cartridge
• Sold as individual pairs
• 3M Part number 6001
• Genuine Parts – Manufactured by 3M

The Steel Shot Blasting Abrasive is a highly durable and long-lasting peening media, ideally suited for use in airless wheel blast machines for applications like cleaning foundry castings, surface polishing, shot peening, and concrete floor preparation. Available in a variety of grades and sizes, this steel shot is designed for a high-quality performance, conforming to SAE J444, SAE J827, SFSA 20-66 standards, and can be recycled multiple times, offering an economical and effective solution for shot blasting needs.

• Steel shot – manufactured hypereutectoid, metal spheres used in airless centrifugal wheel blast machines to clean foundry castings, surface polishing and shot peening
• Also used in portable trackblast airless wheel blast machines for concrete floor preparation, blasting ship decks and profiling
• Quality Steel Shot is very long lasting
• Steel Shot can be recycled many times
• Hardness: 40-50 HRc. Other hardness’s of steel shot are available on request
• Special, Stainless Steel Shot and High Hardness, Milspec (Military Specification Peening Steel Shot) specification shots available
• Manufactured to conform to: SAE J444, SAE J827, SFSA 20-66
• Steel Shot is packed in 25kg bags, drums or bulk bags

• Nylon webbing whipchecks – easier to install, less damaging to hose and will provide a longer service life
• The use of a whip check restraint is mandatory on all hoses. If you have any questions about the best restraint to use, please contact us directly.

• Replacement flow control regulatory assembly for the RPB® Constant Flow Valve
• Manufacturer part number 4000-11

• The PiBlast is designed for automatic blast cleaning of metal pipes.
• This system allows for efficient pipe blasting without the investment of a permanent installation.
• Has 4 blast nozzles which each blast 1/4 of the pipe
• Only available to blast 8″
• Genuine Parts – Manufactured by Pinovo in Norway
• Not Available in USA – Request a quote/express interest

FOR RENTAL OR PURCHASE

The Schmidt Bulk AmphiBlast™ combines the features of a MegaBlaster and dustless vapour abrasive blasting, and is the latest in technology and efficiency. The Bulk AmphiBlast™ has a super large capacity that allows up to 4 blasters to blast for up to 8 hours each without stopping to refill the blast pot.  Furthermore, each blaster can choose independently if they want to dry blast, mist blast (slurry), Softwash^TM or blow down.

• Suits BABL3475 LED Blast Light
• Replacement Sacrificial Pyrex Blast Lens to protect the Light from the blasting ricochet
• Simple to replace – Unscrew the front black cover slip in the lens
• Sold as a box of 12
• Genuine Part – Manufactured by Western Technology

• OEM Replacement Plunger Seal for MicroValve™ 1 / Thompson® Valve I
• Schmidt® / Axxiom part # 2149-000-06

When your BAABS Deadman system needs refreshed, we have the replacement parts you need. This is the Rail Base Assembly group, and comes in either Long or Short complete assemblies.  Individual repair parts are also available under the Repair Parts tab.

• Easy installation
• Secure and stable base for deadman switch
• Designed for use with multiple blasting accessories
• Durable and long-lasting construction

• Suits Mega-Max Aluminum and Brass Blast Hose Couplings
• Single Lipped MRL Rubber
• 1-¾ (45mm) Bore Size
• Have Large Bore for maximum efficiency
• Sold as a pack of 10

When your G3 Trigger Deadman system needs refreshed, we have the replacement parts you need.  This is the curved guard for the trigger. Note:  Guard pins sold separately – see part number DM227000008PK available here.

When your G3 Trigger Deadman system needs refreshed, we have the replacement parts you need. These are the replacement trigger subassemblies.

• Easy to install
• Offered in 4 variations

• Suits Trelawny TFP 200 Electric Scaler (HT3202004T)
• Genuine part – manufactured by Trelawny
• Extension Cord
• Sold individually

The High Quality Steel Grit is a top-performing cleaning and descaling abrasive media, predominantly used in airless wheel blast machines and blast rooms. Available in multiple grades and sizes, this steel grit offers a unique feature where its sharp edges gradually round off during multiple recycling processes, making it a cost-effective and efficient option for various abrasive blasting applications.

• Manufactured cast steel grit abrasive
• Used mainly in airless wheel blast machines & blast rooms
• Blue grey, angular granules (GL = blue, GH = grey)
• Can be recycled many times
• High performance, cleaning and descaling abrasive
• Sharp edges gradually round over as it wears
• Standard GL and GH hardness grit
• Special GP hardness and other specifications available
• Manufactured to conform to: SAE J444, SAE J1993, SFSA 20-66
• Hardness: GL = 56-60 HRc, GH = 60-65 HRc
• Packed in 25kg bags

• 48:1 pump ratio – 100 psi inlet pressure will deliver 4,800 psi spray pressure
• Ideal for use as a solvent flush pump on a 2 component painting system
• Lower size is 75cc
• Comes with 50ft spray hose, 6ft whiphose, XTR504 gun and RAC tip
• Genuine product – manufactured by Graco

• Suits 24″ large blast pot
• Pop-Up Umbrella Spider Plate allows valve to pop-up easily when a head of abrasive is stored above the blast machine
• Installed into the pot of the blast pot
• Used in auto-loading applications such as blastrooms, recovery systems etc.
• Sold as a complete assembly including the legs and arms

• Liquid surface pre-treatment used in lead-based coating removal projects
• Mil thickness required depends on lead level in the coating to be removed.
• When properly applied, the waste media will pass the Lead TCLP test, allowing disposal as non-hazardous waste
• 5 gallons per pail (sold by the pail)
• Full skid quantity is 36 pails (180 gallons)

The SnakeBite XP is the high-performance nozzle used in the highly successful SnakeBite XQ silenced configuration.  As the XP uses a simple bump cap on the end (instead of the silencer), it does not have the noise and thrust reduction of the XQ. It is very fast and exceeds the performance of our hyper nozzle.  Details as follows:

• Performance:
  • The advanced modeling used when designing this Snakebite XP hyper nozzle has taken blasting performance to a whole new level.  The refined internal geometry coupled with the non-silencing bump-cap produces very fast cleaning speed indeed.
• Liner:
  • The new internal geometry when combined with the silicon nitride composition extends usable life greatly.
• Jacket:
  • Anodized aluminum with ergonomic shape makes for a very comfortable grip.
• Sizes:
  • Available in the following orifice sizes:  6, 7, 8, & 10
  • Overall length varies from 10″ to 13″, depending on orifice size.
• Thread type:
  • Available in standard 2″ Contractor thread only.  (See You May Also Like nozzle thread adapters below if you want to use with fine thread nozzle holders.)

Note:  Inquire for details about our free trial offer.

• Trelawny Needle Scalers for rust, scale and paint removal
• Heavy Duty, High Quality Hand Tools
• Pneumatic Operation
• Preferred option for Low Vibration, someone can work for twice as long with Low Vibration
• Come with a different quantity of needles, the more needles the more work you get done.
• Pistol Grip vs Inline based on where you are working, most contractors use 5:1 Pistol Grip
• Sold Individually
• Genuine Parts – Manufactured by Trelawny

BlastOne offers all accessories and replacement parts for DeFelsko testing equipment.

The innovative PosiTector Dew Point Meter Logger autonomously records climatic conditions and can remain magnetically attached to the substrate 24/7.  This Kensington lock provides security, helping to ensure that the valuable instrument remains secure.

MPN:  DPMLLOCK

• Custom designed blasting and painting facilities, sized as large as application requires
• Ideal for new construction and repair, for vessels of all type and size
• Available configurations:
  • Hybrid blast/paint hall – single hall for both operations at different times
  • 2 separate halls – each single-purpose hall dedicated to blasting or painting
• Available with completely controllable environmental conditions to meet required specifications
• Compatible with abrasive recovery and recycling equipment with many available configurations

• Suits 1-1/2″ – 3″ BlastOne MegaFlow Bull Hose and Spud or 4-Claw fittings
• Holds coupling in the hose by clamping externally
• Genuine part manufactured by Dixon
• Sold individually

• Permanent or temporary mounting systems
• Ideal for setting up temporary blasting/painting facilities
• Supplied in modular kit for simple, quick installation (under a week)
• Fully relocatable — easy to install and dismantle
• 100% Waterproof design
• Wind rating as per local requirements
• No concrete foundation necessary
• Compatible with optional abrasive recovery and dust collection equipment

Designed for the Binks SV100 HVLP spray gun, this repair kit includes the parts needed for a standard rebuild.

See page 5 on the attached SV-100 paint gun manual for a complete list of the parts included in this kit.

MPN:  K-5057

• Replacement Battery Packs for RPB PX5 PAPR options as follows:
  • Standard Capacity (03-855)
  • High Capacity (03-856)
• See description tab for battery life estimates
• Sold Individually
• Both Single and 5-Port Chargers are available.
• Genuine RPB products

Nozzle holder for blast hose 

• Couples the blast nozzle to the blast hose
• Choose your blast nozzle thread type;
  • 3/4″ Medium (aka Mitey-Mite) Thread
  • 1-1/4″ Industrial Fine Thread
  • 2″ Coarse/Contractor Thread *Contractor Favorite*
• Available in Nylon, Brass or Aluminum
• Click the Documents tab below to view full selection
• Industry Commonly Referred to As: HE1, HE-1, HE2, HE-2, HE3, HE-3, NHP1, NHP2, NHP3, NH1, NH-1, NH2, NH-2, NH3, NH-3

When your BAABS Deadman system needs refreshed, we have the replacement parts you need. This is a 3-pack of the Locking Knob w/bolt.   Other individual components are also available.  See the Repair Parts tab on the main BAABS page here.

• Suits 20″ Flexible Dust Collector Ducting
• Duct Clamp is used to quickly join Ducts to the Dust Collector or a duct joining ring
• Quick action type
• Sold Individually

• Side Window Blockers, Shade 5 (18-821-5)
• Pair

Genuine Product – Manufactured by RPB

• Very long lasting – the LEDs will last 20x the life of a halogen globe
• Boasts a dual lens system to keep dust out of the LED’s
• Light, 20oz cast aluminum body
• 295 lumens light output
• Voltage range – 12-24 v DC
• Can be repaired on site, reduces down-time
• Hose mount foot is easily replaceable
• Genuine Part – Manufactured by Western Technology

BlastOne offers a full selection of industrial fittings.  This group is the Brass Reducer Bushings.  Other information is as follows:  

• 1st dimension is the NPTF Male Pipe size 
• 2nd dimension is the NPTF Female Pipe size
• Operating Pressure Range:  1000 PSI
• Operating Temperature Range:  -65 to 250F

• Belt Support Mount (03-811)
• Use with PX5 and HX5
• Manufactured by RPB

Recycler screens are available in various mesh sizes, allowing optimization of dust removal or media recycles, whatever your application requires. These screens are for the 70 series recyclers.  Screens are also available for the 35 series – enquire.

NOTE:  Due to our distribution agreement with Sponge-Jet, pricing is not shown on our website.  Contact us for fast, competitive pricing or sent your request via our web quote link.

• Suits 20″ Flexible Dust Collector Ducting
• Duct Clamp is used to quickly join Ducts to the Dust Collector or a duct joining ring
• Simple worm/screw type
• Sold Individually

Ultra Paint Spray Airless Hose (SKU: P-SPH50) delivers high pressure performance with a 3:1 safety factor, featuring swivel nut female connectors and safety spring guards.

• High-pressure airless hose, tailored for superior spray results.
• Features a 3:1 built-in safety factor, offering protection against pump runaway.
• Convenient swivel nut female connectors ensure easy fit-up, locking up rigidly when tightened.
• Enhanced safety with spring guards fitted to whip hose ends.
• The 3300 psi hose boasts a durable nylon braid, whereas other options come with a robust steel braid.
• Customizable offerings with multiple pressure ratings, sizes, and lengths available.

The Bullard IsoTherm Cool Vests are a convenient and effective solution for enhancing comfort and safety for workers in hot and humid conditions. By using  ‘rechargeable’ cool-packs which are inserted into the front and back of the vest, Bullard has developed a highly portable solution for increasing productivity by increasing operator comfort.  Features include:

• Safe:
  • The cooling agent within the pack is non-toxic
  • Vest constructed of flame-retardant fabric
  • High-Viz version available with reflective stripes
• Comfortable:
  • Keeps at a  constant 55 degrees for hours (depending on environmental conditions)
  • Multiple size options with adjustable straps
  • No condensation
• Portable & Easy:
  • Simply drop the cooling packs into ice or cold water when depleted, and will ‘recharge’ in about 20 minutes.
  • Does not require connection to an air hose

Note:  Bullard also offers an air-fed cooling vest, which doesn’t require recharging, but which requires connection to compressed air.

• Air orbital sander designed for smoothing and sanding paint, fiberglass, wood and body filler
• 4151 & 4152 Series
• 6″ vacuum sanding pad included
• Connects to central/portable vacuum systems
• Dissimilar to comparable orbital sanders – can extract dust through and around the pad when in use – keeps foreign matter away from motor to reduce clogs
• 12,000rpm motor, 3/16″ orbit provides swirl-free finish
• Low vibration for smoother sanding
• 1/4″ air inlet and 8 CFM air consumption

The Nova series of respirators offer the Nova Talk in-helmet communication system. This system requires a cable to connect your specific 2-way radio to the helmet.

If you’re unsure which cable you need to order, you can find our compatibility table under our Description tab. If any questions, chat or call us – we’re real people and happy to help!

• Used for short-term dust collection
  • After 1 days use, they need to be washed and dried
    • Fabric usually clogs after 4-6 hours
• Fits many portable dust extraction fans
  • NOTE – Not recommended for Black Max electric fans larger than 16″
• Used for sandblasting dust control
  • Nuisance, non-toxic, non-hazardous dust
• Ideal for short-term abrasive blasting projects
• Made from 100% cotton
• Includes zipper access for cleaning out loose dust before washing (not applicable to DCBMX2100)
• Breathable for air filtration
• High volume air flow design
• Tapered necks for easy attachment to extraction fans
• Quick to set-up and pull-down
• Recommended purchasing in quantities of 10

NOTE – Dust socks will not capture dust under 10 microns. Hazardous dusts, such as lead, asbestos, beryllium, sillica, or PCBS, are usually under 5 microns.

When applying roof coatings or other heavy body fluids, the Binks 7E2 spray gun is up to the task.  Selected features as follows:

• 4-finger hardened steel trigger
• Heavy duty forged aluminum body with forged and plated brass head
• 3/8″ NPSM air inlet
• 3/4″ NPSM fluid inlet
• Multiple fluid nozzle / air cap configurations available

• 2-claw threaded coupling for metering valve outlet, to enable connection of blast hose
• Supplied with HFGMRLP coupling gasket fitted
• For Aluminum, Brass, and Steel,  use HFCLP1 thin safety lock pins – purchase separately
• Nylon is supplied with HFGPCG gasket fitted and contains an integral springlock pin
• 2 types available – Standard and MegaMax.
  • Note: MegaMax and Standard couplings require an adapter to fit together.
• MegaMax couplings are Full-Flow, designed to remove the air restrictions caused by standard couplings, and increases the PSI available to the nozzle.  The increased PSI is mostly beneficial when doing high-production blasting using 1.5″ or 2″ ID Blast Hoses.
• These are threaded couplings designed for metering valve outlets only.  Unthreaded QC couplings are used on blast hoses, and can be found HERE.
• Note:  1 1/4″ threaded couplings can also be used as Quick-couple type nozzle holders for fine thread nozzles.
• Industry Size Commonly Referred to as SB1, SB-1, SB2, SB-2

Updated and enhanced! BlastOne has refreshed its highly successful MistBlaster® and has released the latest generation with even more capability!

What HAS NOT changed:

• Industry-Leading Flexibility. 
  • The MistBlaster® is a true dry blaster with the added capability of being the best wet blaster on the market. It is not a limited-purpose dustless / slurry blaster that will sit around gathering dust most days.
• Water and Abrasive flow is separately adjustable. Maximizes production while keeping cleanup to a minimum.
• Reliable design.  Uses the latest generation TeraValve® metering valve on the popular 6.5CF pot chassis.
• Abrasive choice.  Will work with most abrasives in dry mode. In wet mode, garnet or crushed glass are recommended.

What HAS changed:

• Enhanced functionality. 4 functions are built into the control panel (Dry Blast, Wet Blast, Wash Down, and now Blow Down)
• Controls flexibility.  The dual deadman control system is now set up to operate either electrically or pneumatically.
• High-Flow piping.  Air pressure regulator has been deleted and piping has been upgraded to increase nozzle pressure.

All 6.5 c.f. MistBlasters include the following as standard:

• Single outlet TeraValve® abrasive metering valve
• Dual electric / pneumatic controls, including deadman handle and control line
• Industrial-strength Schmidt® VBS II Muffler

Configuration Options:

• Wheel version – Stand-alone unit, portable configuration
• Skid version – Stand-alone unit, mounted on a steel skid.
• Combo Skid versions, save setup time and storage space. Available in the following configurations:
  • Combo Skid 400 cfm Dryer Options as follows: 
    • Deliquescent type (4-season / highest efficiency)
    • Aftercooler Squat type (3-season / less effective in cooler temperatures)
    • No Dryer
    • Note: Unlike dedicated slurry-type blasters, the MistBlaster is designed around a standard dry vessel.  A stand-alone air dryer is required in order to realize a full return on your investment.
  • Combo Skid Mounting Options as follows: 
    • Steel Skid
    • Steel Skid with Frame
  • Combo Skid Breathing Air Packages as follows: 
    • With Breathing Air Station (breathing air filter, carbon monoxide alarm, and 50′ breathing air line)
    • Without Breathing Air Station
  • Note:  All Combo Skid configurations include an Air Manifold with spare air ports and a 50-gallon tank.
• Retrofit version:  Save money by retrofitting your existing 6.5 pot (must be structurally sound).  Available in wheel or skid configurations and includes all standard MistBlaster features.

Available for Purchase or Rental. Ask about a demo!

Additional details shown under the description tab.

BLASTHOSE

• High quality, long lasting sandblasting hose
• Blast Hoses have a thick, anti-static, natural rubber liner
• Made to BlastOne Blast Hose specification
• Rated to minimum 175 psi – 3:1 safety factor
• Robust TuffRap™ outer blasting hose cover
• Heavy Wall Blast Hose
• Recommended for use as an extension hose
• Fit with your choice of couplings
• Supplied as a bare hose coil or as a Certified Blast Hose Assembly – certificate is available upon request.

Adapts a contractor thread nozzle to a wet blasting nozzle.  More control than with a halo nozzle.

• Injects water internally into the abrasive / air stream
• Adapter connects to the nozzle holder, and holds a contractor thread nozzle.
• Includes needle valve to optimize mixture
• Requires a pressure washer to operate, set for 500-1000 psi, 2-4 GPM flow

• Easy to operate
• Utilizes Graco’s popular King and Xtreme airless spray technology
• 2:1 fixed ratio with 115/58 cc lowers
• Lowers have with built-in filters
• Cart mounted
• Comes with material hoses and XTR-7 gun
• Uses an NXT 6500 Air Motor
• Pump Size Calculator

• A lightweight closed-circuit vacuum blaster with interchangeable heads.
• Edge blasting tools.
• Nozzle size: No.6 (⅜”)
• Blasting rate: up to 27 ft²/2.5 m² per hour.
• Compressed air requirement: 320 cfm.
• Surface preparation standards compliance capability: up to SA 3 / SSPC-SP-5 / NACE No. 1.
• Genuine Parts – Manufactured by Pinovo in Norway.
• Limited availability in the USA – Request a quote/express interest.

• FREE Shipping
• 30 Day Money-Back Guarantee | Free Returns
• Improves safety when loading abrasive into Mega Blaster
• Heavy-duty steel cage prevents possibility of bulk bag dropping while loading
• Designed for Schmidt 160 C.F. pot.  Other configurations available – enquire.

The Binks 2100 Spray Guns are very well known as a premium conventional paint gun.  Commonly used with pressure pots, they offer the following:

• Versatility.  Sprays a wide range of materials including adhesives, epoxy, abrasive fluid, and all conventional coatings including high solids.
• Robust Construction.  Built with a forged aluminum body and nickle-plated brass nozzles & knobs for years of service.
• Configurable.  Available with a variety of tip / nozzle sizes, with or without the air cap, and in packages including hose and tanks.
• Rebuildable.  OEM rebuild kits available for all versions.
• Genuine OEM – Manufactured by Carlisle Fluid Technologies.

• OEM Urethane Seat suit Thompson Valve 2
• Used with the Tungsten Carbide Sleeve (The most common)
• One of the main signs of wear is air leaking out of the nozzle when you’re not blasting but the pot is pressurized
• Schmidt / Axxiom part # 2152-000-10

• Superior quality, lightweight and highly flexible sandblasting hose
• Blast Hoses have anti-static, natural rubber liner
• Rated to minimum 175 psi – 3:1 safety factor
• Robust TuffRap outer blasting hose cover
• Commonly known as whip hose, supa hose or supahose
• Fit with your choice of nozzle holder and couplings
• Please Request Rental Pricing

• Walk-behind vacuum blasting head
• Will Blast a 4″ wide blast strip – widest of any blast and vac workhead
• Nozzle size: No.6 (⅜”)
• Blasting rate: up to 64 ft²/6 m² per hour.
• Compressed air requirement: 500 cfm.
• Surface preparation standards compliance capability: up to SA 3 / SSPC-SP-5 / NACE No. 1.
• Achievable surface profile: 110 µm, depending on blast pressure, grit size, and surface.
• Noise level: 89 dB at 1m distance.
• Mounted with Wheels, making it easy to maneuver
• Has replaceable rubber lining and brushes.
• Genuine Parts – Manufactured by Pinovo in Norway

Limited availability in the USA – Request a quote/express interest.

• The PiPoint is the smallest hand-held vacuum blasting tool.
• Has 8 interchangeable heads providing flexibility for different job requirements.
• Allows you to blast inside a small box web beam, etc.
• Nozzle size: No.6 (⅜”)
• Blasting rate: up to 6 ft²/0.6 m² per hour.
• Compressed air requirement: 250 cfm.
• Surface preparation standards compliance capability: up to SA 3 / SSPC-SP-5 / NACE No. 1.
• Achievable surface profile: 110 µm, depending on blast pressure, grit size, and surface.
• Noise level: 89 dB at 1m distance.
• Genuine Parts – Manufactured by Pinovo in Norway

Limited availability in the USA – Request a quote/express interest.

BULKBLASTER / MEGABLASTER

• Specified capacity 160 cu ft / 4500 liters
• Manufactured by Schmidt to BlastOne unique specifications
• Garnet abrasive capacity – 23800 lbs / 10.8 tonne
• 1600 cfm Airprep™ mounted directly on the front of the MegaBlaster
• Comes with 2 Thompson® Valve metering valves, up to 4 outlets possible
• Skid or Trailer Mounted
• Hybrid Bulk Blaster with built-in Air Dryer

• Pneumatic lift with three dimensional movement capability.
• Used in a paint booths of up to 20′ Wide x 26′ High
• Wall mounted, with adequate floor clearance for hoses etc.
• CE, CAS, and UL certified, ATEX compliant
• Operator controls the console from the platform
• Extra air outlet for tools inside the basket

• Working height of up-to 14′ 9″ high
• Pneumatically operated for safety in explosion areas like paint booths
• Self-centering steering for easy maneuvering
• CE, CAS, and UL certified, ATEX compliant

The Sponge-Jet B-Vac Pro is a premium system that integrates the 3 essential processes of sponge blasting into a single unit.  It is designed to reduce space requirements and deployment time, and is the most popular Sponge-Jet integrated system.  Due to it’s built-in vacuum system, it reduces the personnel need by 1 person, which makes it price-competitive on jobs of 4+ days duration.  Available for purchase or rent.

Selected features include:

• Feed Unit.  Large capacity pneumatic 470-SJ model with up to 2 hours blasting time.
• Recycler.  Pneumatic 50-P recycler with up-sized screen for faster processing.
• Vacuum.  With 11 inches of mercury, this powerful vacuum will transport up to 18 lbs of media per minute.
• Lifting frame.  Rugged design allows this 6500 lb unit to be transported by forklift or crane.  Built in ladder included.
• Other features.  Includes pressure relief valve, high-capacity muffler, secondary moisture separator, and more.
• Selected Options.
  • 55-gallon drop-out drum, which when positioned in-line with the vacuum system, reduces the dust loading on the vacuum filter.
  • Stand-alone moisture separator. Excellent for use when the primary air dryer is at a distance from the blasting unit.

Note:  Due to our distribution agreement with Sponge-Jet, pricing is not shown on our website.  Contact us for fast, competitive pricing or send in the web-form quote request.

The “Blast Nozzle Pressure Test Kit” (SKU: BAHNGKit) by BlastOne ensures quick and accurate nozzle pressure testing. Comes complete with a stainless steel pressure gauge, needles, and a protective leather-bound case.

• For testing air pressure at the nozzle
• Uses hyperdermic needles which insert into the blast hose to take the nozzle pressure
• Insert about 6-10ft behind blaster for most accurate reading
• Test kit includes:
  • Liquid filled stainless steel pressure gage with dual pressure & efficiency scale
  • Four needles and instructions
  • Protective leather bound case
• Sold as a Kit
• MPN 2010-014-03

Note – there is no calibration certificate process available for this item.

The DeVilbiss EXL-520 series was developed for professional fine finish applications.  This is the Gravity Feed series with additional details as follows:

• Lightweight with the comfortable, classic DeVilbiss feel
• Includes a full 1-liter aluminum cup
• Large spray pattern with excellent fluid control for applying more film in fewer passes
• 3 standard fluid tip configurations available

Each EXL Gravity Feed gun kit includes the cup with a disposable push-on lid, an air cap cleaning kit, spray lube, fluid filter, gun hook, and a pack of disposable cup liners.

Connects either the AC1000DC or the CT30DC cool tubes to the DC70 cooling vest, when a respirator is NOT being used.

Genuine Bullard parts.  

MPN:  CH1000

• Suits AHR general purpose air hose
• Two piece fitting, hose tail to swivel nut female thread
• Various clamping options – double bolt clamp or bandit clamp
• Sold individually

• Suits MegaFlow Bull Air Hose (BHBULL50/75)
• Ground Joint Spud Bull Hose Coupling
• Rugged plated steel construction
• Recommended by BlastOne as the preferred Bull hose fitting – safer than 4-claw
• Gasket-less, low maintenance design
• Sold Individually
• Genuine Parts – manufactured by Dixon

• An effective means of applying waterborne- and solvent-based materials
• High quality and long lasting
• Fully rebuildable with the related repair kit
• Features fluid passages made from 300-grade stainless steel, preventing internal corrosion
• Body is made from drop forged aluminum
• Fluid inlet: 3/8″ NPS (M)
• Air inlet: 1/4″ NPS (M)
• Weight: 21.6oz.
• Feed type: pressure feed, suction feed

RENT or PURCHASE this surface preparation work-horse!

The original M7 VertiDrive.  Bringing improved production to large blasting projects.

• Faster Production.  Holds 2 nozzles simultaneously and each nozzle is up to 30% faster than the best hand blasting.
• Cleaner Surface.  Provides consistent blasting quality by adjusting equipment speed to the specific surface needs.
• Safer.  Remote control operation removes the operator from harms way.
• Capable.  Blast both horizontal and vertical surfaces with ease.
• Versatile.  The M7 can be configured in 3 ways:
  • Abrasive Blasting.  Can blast either wet or dry.
  • Power Wash surface cleaning
  • Ultra High Pressure (UHP) coating removal.

Note:  we recommend that this equipment be used on large, flat surfaces (like tanks or ship hulls) with at least 10,000 square feet to recognize cost savings.  Not all medias can be used with the VertiDrive.

Can be used with existing blast equipment, or BlastOne can provide. Purchase pricing is typically between $125,000 and $204,000, depending on configuration.

BlastOne offers on-site training to help maximize your investment.  Contact us to discuss your specific project and estimate the ROI by using a VertiDrive.

• 2-pin Twistlok plug
• For use with Clemco remote control systems only

• Modified High-cube-style shipping container construction (20 ft, 40 ft)
• Watertight, Weatherproof design
• Completely self-contained for maximum portability
• Simple setup/installation
• Partial abrasive recovery system, with shovel-in hopper
• Available as fully assembled unit or retrofit kit
• Instant Preliminary Quotes Available on Request!

AVAILABLE FOR RENTAL OR PURCHASE

Every BlastOne dehumidifier has the following features:

• Unit-mounted filters, options include:
  • 10% permanent washable 2″ thick industrial
  • 30% 2″ (standard) pleated throw away
  • 55% to 65% 4″ cartridge throw away
  • 99.97% HEPA 12″ cartridge
• G-90 16-gage galvanized double-wall construction with insulation
• Direct-fired natural-gas, electric or propane reactivation systems
• Cooling coil and heating coil options
• Skid or trailer mounted
• Full protective enclosure
• Integrated control system with 10-point operational function display
• Shipping covers for all inlets and outlets
• Packaged refrigeration system options
• Packaged generator system options

The Sure-Fire Electric Deadman Remote Control Handle (SKU: P-DMWTXE) is a compact, hands-free electrically-operated tool. Available in 12V and 24V options, it’s designed for enhanced operational control. Note: Accessories like TwistLok plug and extension cable sold separately.

• Compact ‘hands-free’ design
• Ball and chain not included – operator must use as per instruction manual
• 12 Volt or 24 Volt electric operation
• 2-wire is standard or 3-position toggle switch for use with integrated remote abrasive cut-off switch
• Order TwistLok plug and/or extension cable separately

• 1.5m insulated cable, coverts the PosiTest^® HHD to a wand-type instrument
• Not for voltages >15kV

• Replacement silencers for the SnakeBite family of blast nozzles
• Up to 45% less operator fatigue
• Up to 16dB noise reduction
• 2 versions available
  • Standard Pressure Silencer effective between 90-110 psi
  • Low Pressure Silencer (LPS) effective between 70-90 psi

• Helical bevel gear design
• 5″ wheel capacity
• 0.8 HP governed motor
• Ergonomic side handle
• Keyless adjustable protective guard
• Manufacturer part #CP9121BR

Offers Quick and Easy Setup for blast cleaning on internals of small pipes

• Blasts in a 360 degree pattern
• Can be used in pipes from 2.5 to 5 inch ID
• Machined aluminum jacket with tungsten carbide liner
• Replaceable tungsten carbide deflector tip
• Coarse, 2″ Contractor Thread
• Screws directly into nozzle holder
• NOTE – requires Nylon nozzle holder with contractor threads

• Highest level of durability and low vibration with steel cut spiral bevel gears
• Increases user productivity
• Offers greater comfort and control with two position side handle
• Enhanced application versatility with keyless guard
• Improved gear durability with low profile jam pot
• Quick and easy wheel removal with quick change wheel release

• Use with rolling spring electrodes to precisely locate holidays
• Manufacturer part# HHDPADDLE
• Made in the USA
• Note: Accidental contact with the electrode may result in an electric shock. Use with caution

• 2″ Diameter Pyrex Blast Lens
• Suits Brite-Blast Light BABL3070L
• Comes with O-Ring
• Use with BABL3001 retaining clip
• Sold Individually.

• Suits Pneumatic Blast Pot Control Valve DM2229000
• Service Kit is used to keep your blast pot operational
• Sold as a Kit containing;
  • Piston
  • Spring
  • Replacement O-rings

Replacement Hub Assembly Spare Parts

• 30 Day Money Back Guarantee | Free Returns
• Includes Hub, tool, and necessary fasteners
• Refer to Description tab for technical details
• Genuine part – manufactured by MontiPower

• IPC1007 RB-5 Replacement brake w/lining
• For IPC1000 RotorBlast
• Note:  This item is also included in Spare Parts kit, IPC1099

RENT or PURCHASE this surface preparation work-horse!

The next-generation V400 Ultra High Pressure VertiDrive. Bringing enhanced technology to closed-loop UHP projects.

• Faster.  V400 robotic technology is up to 5X faster than manual work.
• Cleaner.  The rust, coatings, and contaminants are removed and returned to the vacuum via the closed-circuit system.
• Safer.  Remote control operation removes the operator from harms way.
• Capable.  Boosted magnetic performance allows standard operation on carbon steel surfaces that are horizontal, vertical, and even upside-down!
• Environmentally friendly.  Contaminants don’t just fall to the surface or blow away in the wind.  The V400 brings them back to the vacuum source for responsible disposal.
• Productive.  Has an extra-wide 15.5″ (400 mm) cleaning width

Note:  UHP does not create surface profile , but exposes the existing profile.

We recommend that this equipment be used on large, flat surfaces (like tanks or ship hulls) with at least 10,000 square feet to realize cost savings.  Can be used with existing UHP pumps or BlastOne can arrange.  Purchase pricing is typically between $165,000 and $204,000 depending on configuration.

BlastOne can provide on-site training and ongoing support to ensure maximum productivity from Day 1.  Schedule a call with our SMEs to calculate an expected ROI for your next project.

• Suits Contractor II and FTX Spray Guns
• Complete Repair Kit
• Sold as a Kit
• Genuine Parts – Manufactured by Graco

FREE Shipping

30 Day Money-Back Guarantee | Free Returns

90 Day Manufacturer Warranty

• Unique!  Dual Outlet for 2 operators, in a short configuration for easy loading.
• Only 46 inches tall!  Shorter than a standard 6.5 pot.
• Capacity of 11 cu ft, which equates to 1600lbs of a dense media like premium GMA Garnet
• Pressure Rating: 150psi
• TeraValve pressure-hold metering valves

Sold as a Kit which Includes:

• Blast Pot
• Pneumatic Deadman Control System comes with 2 sets of 50 feet of control line and handle
• Choice of inlet fitting in either 4-claw or Spud type. Spud will be supplied unless otherwise noted in Order Comments field.

BLAST HOSE sold separately

Genuine Product – Manufactured by Schmidt® /Axxiom Manufacturing

When your G3 Trigger Deadman system needs refreshed, we have the replacement parts you need.  This is the upper portion of the base grip handle, including the top rail piece.

• Ergonomic design for comfortable grip
• Easy to install on the Schmidt G3 Trigger-Style Deadman Control
• Durable construction for long-lasting use
• DM227000001 model number for easy identification

When your G3 Trigger Deadman system needs refreshed, we have the replacement parts you need.  This is the guard pin to secure the trigger guard (including the retaining rings).

• High-quality stainless steel construction
• Designed for use with the Schmidt G3 Deadman Control Handle
• Easy to install and use
• Sold in packs of 4 pins

For projects where a windscreen is desireable, and full containment is not required.

• 85% Mesh poly fabric, allows slight airflow through and helps keep most dust and debris inside
• Protects from debris, wind and UV rays
• Both non-FR and FR versions available
• Gromments around perimeter and in center

Designed with an extra-long venturi and concentrated blast pattern, the Hyper (aka XL or Saber) nozzle increases performance substantially. Additional details as follows:

Click for Buying Guide

• Performance characteristics:
  • Up to 30% faster coating removal and/or
  • Allows greater stand-off distance (reduces need to bend over when blasting tank floors, allows greater reach, etc.)
• Thread types & Orifice Size options:
  • Contractor 2″ (50mm)
  • Fine 1-¼” (32mm)
  • Orifice size options:  5, 6, 7, 8, & 10
• Liner:
  • SiALON silicon nitride, provides longer life and lighter weight than tungsten carbide.
• Jacket:
  • All aluminum, non-slip knurled finish
• Design:  
  • 1-¼” throat entry, extended venturi, 12 inches long

• Pressure-release deadman control valve i.e., blast machine depressurizes when the deadman handle is released.
• Used when an overhead hopper automatically feeds abrasive into a blast machine.
• Rugged stainless steel body, compact, isolated 2-bolt construction.
• Doubles blast machine refill cycle time.
• Virtual Position Indicator illustrates orifice size, giving the ability to set abrasive flow quickly and consistently.
• Set and forget – flow rates stay set where you put them.
• High wear, rugged plunger seal.
• Stainless steel body for long life.
• Improved urethane clean-out port enabling quick removal of obstructions while improving port and valve life.
• Fit a rebuild kit while the valve is still fitted to the blast machine.
• Sold individually.
• Genuine Products – Manufactured by Schmidt / Axxiom Manufacturing

The Nova 3 L4 Replacement Light Unit is designed to take your Nova 3 to new heights of performance. Crafted with precision and built to last, this replacement light unit ensures optimal visibility during your work tasks. Whether you’re working in low-light conditions or need additional illumination, the Nova 3 L4 Replacement Light Unit is the perfect solution.

• Pinovo Pico is one of the most ingenious vacuum blasting discoveries in 10 years
• Hand-held dustless external pipe blasting system.
• Multiple different sized work-heads adapt to different sized pipe.
• Works for 2″ – 8″ pipes
• Genuine Parts – Manufactured by Pinovo in Norway
• Minimal Availability in USA – Request a quote/express interest

• Use with 1/2″ to 1-1/2″ nut & tail hose couplings
• General purpose double bolt hose clamps
• Two bolt, split-collar clamp without claw
• Sold individually

Revitalize your MicroValve 3 with the Schmidt MicroValve 3 Complete Rebuild Kit (SKU: GV212810099). This comprehensive OEM replacement kit, complete with plunger, ensures optimal functionality and extended valve life.

• OEM Rebuild Kit suit MicroValve 3 – Includes Plunger
• Schmidt / Axxiom part # 2128-100-99
• Includes: GV7011005060, 2127-000-05, GV214950006, GV212810008, GV212800015

• Replacement TeraValve™ XL Cap
• Top part of the TeraValve™, between the Knob and Body
• Schmidt® / Axxiom part # 2130-000-02

• Thompson Metering Valve II lasts up to 10 times longer than any other valve, due to its unique engineering
• Designed to handle the harshest blasting environments known
• Will handle up to a 3/4″ blast nozzle
• Will work with any abrasive, including very fine/dusty abrasives
• Most rugged and reliable valve for any application
• Sold Individually
• Genuine Parts – Made in USA by Schmidt / Axxiom Manufacturing

AVAILABLE FOR RENTAL OR PURCHASE

• LED explosion proof mountable area light
• Kick-it-tough design to outlast brutal onsite treatment from contractors
• Comes with explosion proof cable
• Approved for: Class 1, Div 1 & 2; Groups C & D
• Suitable for wet location use
• LEDs color: ~6000K, CRI >70
• Weight: 10 lbs (light head only)
• Genuine Parts – Manufactured by Western Technology

The GMA PrecisionBlast 120 Mesh Garnet Abrasive (SKU: P-GA120), is a MilSpec Approved abrasive ideal for delicate surface preparation. Offering a fine surface profile of 1.0 – 2.0 mil (25 -50µm) or less, this abrasive boosts blasting rates up to 330 ft²/hr and a low consumption rate of 1.25 – 2.0 lb/ft². Its low dust factor and recyclability of 2/10 make it perfect for precision tasks on sensitive substrates like stainless steel, aluminum, titanium, and glass.

• Creates a fine surface profile of 1.0 – 2.0 mil
• High blasting rates up to 330 ft²/hr
• Low consumption rate of 1.25 – 2.0 lb/ft²
• Low dust factor for cleaner operations
• 120 mesh size for delicate cleaning tasks
• Ideal for etching glass and preparing sensitive metals
• Sold by the pallet (pallet minimum)
• Abrasive cannot be ordered online at this time

From gaskets and crabs to covers and bolts, BlastOne has all the replacement parts you need to repair the Handhole / Manway access panels for Axxiom / Schmidt blast pots.

• Special note:  Be sure to try out the SureFit™ Handway gasket for the 6.5 pot.  It makes installation much easier & faster.  Lasts longer too!
• Note:  Versions of these access assemblies have changed over the years.  If any doubt which version you need, send us the model year and serial number of your blast pot to confirm the correct part before ordering.

• Hi-Tech Microfiber fabric technology
• Unique 5 layer protection in a popular coveralls / overalls design
• Lighter and more breathable offering superior operator comfort
• Anti-static and CE Type 5/Type 6 protection
• Come in boxes of 50

The workhead is the business end of a vacuum blaster.  Various versions are available for different applications, including the following:

• Standard / BNV-3
• Standard / BNV-5
• Large with wheels / BNV-6
• Right Angle
  • Designed to get into smaller areas

In addition to the above, the MiniBRS G2 Trigger Workheads are easier to handle than other versions. Features include the following:

• Longer lasting brushes
• More containment while blasting
• Improved vacuum flow
• Easier to slide head over surfaces while blasting
• Available in either Electric or Pneumatic

For either series, various brushes can be mounted for different surface geometries, as follows:

• Flat Surface
• Inside Corner
• Outside Corner

The Bresle method of testing surfaces for salt contamination is recognized by ISO and ASTM standards.  The DeFelsko SST test probe is an easy and accurate way to conduct these tests.  Test patches are required to perform them and DeFelsko has multiple options, as follows:

• PosiPatch™.  This innovative product utilizes a reusable patch, held by a magnetic ring against the surface.  Available in 2 configurations:
  • Rigid ring.  Preferred for flat surfaces or round surfaces with greater than 40 inch diameter.
  • Flexible ring.  Preferred for round surfaces between 4 and 40 inch OD, or a minimum of 4.5 inches ID.
  • Saves time and money vs. disposable patches.
  • Utilizes a plastic needle – no sharp hypodermic needles required!
• Latex Disposable.  The conventional Latex Adhesive Bresle Method Patch has a sample test volume range of up to 15 ml (the only DeFelsko version with this range) for applications where the spec requires this.
• Latex-Free Disposable.  Similar to latex disposables but lower in cost, the DeFelsko Adhesive Bresle Method Patch is suitable when the 15 ml sample size of the latex version is not required.

Note:  Both disposable options from DeFelsko feature low-tack adhesive with TearGuard™ technology for easy patch removal.  No residue to clean from the surface when using any DeFelsko SST test patch option!

Wall-Man XL personnel lift is a pneumatic lift, suited for paint booths, that can reach extreme heights and features a larger working platform suited for multiple operators.

Wall mounted personnel lift, for use in blast rooms. Capable of 3-axis travel, utilizes heavy-duty design to operate in harsh blasting environments.

• Electric vacuum available – wet & dry (HEPA)
• Best used with
• • TFP200 Deck Scaler
  • SF11 Deck Hammer
  • Peening Prep Tool
  • Trelawny range of Hand Scalers
• Pneumatic vacuum available – wet & dry (HEPA)
• Best used with
• • Trelawny range of EX tools for use in explosive environments
    • VL303 Needle Scaler
    • SF1 Scaling Hammer
    • SF11 Deck Hammer

• Suit Blast and Vac Workhead VCBV200
• Fine Thread Nozzle Holder
• Connects Blast hose to the nozzle and the workhead.
• You can not use the Workhead without this
• Sold Individually

• Suits Pneumatic Control Valve DM2229000
• Replacement Large O-Ring to ensure the piston seal is good
• Sold Individually
• Genuine Parts – Manufactured by Schmidt / Axxiom Manufacturing

• 1st in the World to be ETL Certified • Rechargeable
• Durable Kick-it Tough design
• LED blast rated light
• 2500 lumens when on high
• Class 1, Div. 1&2, Class 2, Div. 1&2 rated
• Option for a UV light (blacklight) which is ideal for inspections
• Suitable for hazardous and wet locations
• Comes in a complete kit with charger and carry case
• Made in USA by Western Technology

The “Blast Nozzle Wear Size Analyzer Gauge” (SKU: INH131PBAG) efficiently determines the internal diameter and wear level of a blast nozzle orifice, ensuring optimal blasting performance.

• Used to determine the internal diameter of a blast nozzle orifice
• Allows you to determine the level of wear of the blast nozzle
• Comes with a removable cap and crayon
• Has size markings to allow you to see quickly what size your nozzle is
• Sold Individually

FREE Shipping

30 Day Money-Back Guarantee | Free Returns

90 Day Manufacturer Warranty

• Compact contractor size, highly portable with good productivity for smaller projects
• When using premium garnet media, this pot will last for up to 1 hour before you need to refill
• Capacity of 3.5 cu ft, which equates to about 500 pounds of dense media like premium GMA garnet
• Pressure Rating: 150psi

Sold as a Kit which Includes:

• Blast Pot
• Deadman Control System with 50 feet of control line and handle
• Choice of inlet fitting in either 4-claw or Spud type.  Spud will be supplied unless otherwise noted in order comments field.

Genuine Products – Manufactured by Schmidt® /Axxiom Manufacturing

• For use with Nylon Coupling Series: PCG-1; PCG-2; PCG-3;
• Material: Double-lipped rubber
• Compatibility:
  • PCG-1: 3/4″ ID and Smaller Blast Hose
  • PCG-2: 1″ ID Blast Hose
  • PCG-3: 1-1/4″ ID and Larger Blast Hose
• Sold as a pack of 10

When your Scaling Hammer needs refreshed, we have the replacement parts you need. This is the Main Handle (Vibration Reduced) (624.5350).

When you scaling hammer needs refreshed, we have the replacement parts you need. This is the Trelawny universal spring valve (712.3022).

When your Scaling Hammer needs refreshed, we have the replacement parts you need. This is the Vacuum Shroud Seal, Polyurethane (731.0120).

When your scaling hammer needs refreshed, we have the replacement parts you need. This is the Trelawny O-Ring Square Section (809.0089).

For protection against hazardous dusts and particulates, the 3M™ Disposable Protective Coveralls 4545 offer the quality and long-lasting comfort your workers value when working in challenging conditions

• Microporous PE laminate construction for Type 5 and Type 6 protection
• Anti-static treatment reduces static build up
• Reinforced gusset translates to increased durability while bending and squatting
• Knit cuffs provide increased comfort versus elastic closures
• 20 units included in each case

When your scaling hammer needs refreshed, we have the replacement parts you need. This is the Trelawny O-ring Valve Cap (809.0139).

When your Scaling Hammer needs refreshed, we have the replacement parts you need. This is the Sealing Washer (810.9001).

When your Scaling Hammer needs refreshed, we have the replacement parts you need. This is the Hose Clamp (821.2000).

Pipe fitters and maintenence workers routinely use these fittings in many applications.  Specifications and details as follows:

• Stocked in various sizes and lengths
• Schedule 40 galvanized for extended life
• Rated for 150 psi
• Sold individually

BlastOne has the parts needed to keep your VertiDrive equipment running. This is the Limit Switch with Connector.

This package includes the following: 

• 10Q Painting Robot
• Trailer Package to contain pumps and controls
• Graco Plural Sprayer
  • Mixing at the pump for 2 pack coatings
  • Can be used with a single pack
• Ventilation unit for the robotic paint head
• Robotic painting head with gun
• Maximum of 150 ft of hose from the trailer to the robot
• Fall arrest
• $420,000 to $470,000 depending on configuration

Additional components such as heat, power, and accessories, are dependent on the configuration. Contact us to learn more.

Junction Box assemblies include the deadman controls for Bulk pots, and are required when retrofitting an old pot with new valves. Available in 2 and 4 outlet configurations.

• 3-piece filter/regulator/lubricator
• Compact body design
• 2-piece modular joiner set
• Snap-lock knob prevents accidental change of set pressure
• Easy-to-read pressure gauge included
• Maximum supply pressure – 150psi
• Wall mount brackets included
• Manufactured by Wilkerson®

Upgrade old technology Bulk pots from donut valves & pinch valves to state-of-the-art TeraValve systems using a retrofit kit.  Available in 2 or 4 outlet configurations.

The CEN Mega Exhaust Muffler retrofit kit is a common option that can be conveniently added when performing this retrofit.

Note:  matching Junction Box is available separately.  Retrofitting is recommended only for mega blasters with good structural integrity.

These are the parts kits only.  BlastOne can perform the retrofit if desired – contact us for pricing and details.

• Suits all Xtreme and Maxlife lowers
• Dump or Bleed Valve Repair Kit
• Valve is mounted on the side of the lower to allow pressure relief from the filter housing
• Kit includes all the replacement parts for the Valve, O-Rings, Gasket, Valve Seat, Carbide Ball and Retaining Ring
• Sold as a Kit
• Genuine Parts – Manufactured by Graco

The PosiTest® HHD – DeFelsko’s solution for detection of holidays, porosity, pinholes, leaks and other discontinuities in coatings and linings that are more than 10 mils (250 microns) thick.

• Advanced pulse or continuous DC technology
• Lightweight and ergonomic design
• Auto voltage calculator based on coating thickness
• Multiple electrode options with custom availability
• Long Form Certificate of Calibration included

Available in 4 Kit options as follows:

• PosiTest HHD Kit (2 versions)
  • Stick-type with Pulsed DC Output
  • 72 Wh Li-ion battery pack with built-in charge indicator
  • Durable Pelican Storm Case
  • 20″ Electrode Rod (or substitute 5″ Electrode, with suffix -S after the part number)
  • Shoulder Strap
  • 25′ earthing cable and smart charger with universal AC voltage input
• PosiTest HHD Basic Kit (same as above HHD kit except for the following)
  • 36 Wh Li-ion battery pack instead of 72 Wh
  • Hard Shell Case instead of Pelican Case
  • 5″ Electrode Rod
• (Note – the above HHD instruments can be converted to wand configurations, aiding in testing hard-to-reach areas, by adding the optional HHDWAND Handheld Wand.)
• PosiTest HHD C Kit
  • Wand-type with Continuous DC Output
  • 18650 Li-ion Batteries (4)
  • Hard Shell Case
  • Extension rod is not required, but available

Several options are available for PosiTest HHD instruments, including:

• Rolling Spring Electrodes, and Conductive Paddle to aid in precise location of holidays
• Flat Wire Brush Electrodes
• Half-Circle Brush Electrodes
• Electrode Adaptors, makes other brands of electrodes compatible with the HHD
• Electrode Rods (for HHD) and Extension Rod (for HHD C)

Note:  For coating thicknesses between 0 and 20 mils (0-500 microns), the PosiTest LPD is recommended.

• Suits Standard Aluminum and Brass Blast Hose Couplings
• High Pressure Version which lasts longer and withstands higher pressures
• Recommended when blasting with pressures over 120psi
• Single Lipped High Pressure Urethane
• 1-¼ (32mm) Bore Size
• Sold as a pack of 10

The DeFelsko® PosiTector® SST Abrasives Test Kit measures soluble salts in blast cleaning abrasives. Designed for compliance with ASTM D4940 and ISO 11127-6, this portable kit includes everything needed to accurately assess contamination levels: two glass beakers, one plastic beaker, a plastic funnel, paper filters, 1L deionized water, 60ml certified conductivity standard, and a stainless mixing rod, all encased in a durable plastic case. Ensure the purity of your abrasives and the quality of your surface preparation with ease.

• Designed for ASTM D4940 and ISO 11127-6 compliance.
• Portable kit includes glass and plastic beakers, funnel, filters, deionized water, conductivity standard, and mixing rod.
• Enables accurate measurement of soluble salt contamination in abrasives.
• Includes certified conductivity standard for meter accuracy verification.
• All components neatly organized in a hard plastic case for field or lab use.

FOR RENTAL OR PURCHASE

• Ideal for blasting penstocks, tunnels, pipelines, wind towers, etc.
• Offers full 360 degree coverage of pipe internals
• Self-propelled forward or reverse motion
• Can blast pipelines 3′ – 32′ in diameter
• Lowers labor costs as much as 75% compared with manual blast-pot operations
• Eliminates inconsistencies commonly found with manual blasting

• Supplied in a pack of 4 test kits
• Abrasive Chloride measurement range 1 ppm to 50 ppm
• Compact, portable, two minute field test
• Safe handling – no needles or syringes

Snakebite.  The world’s quietest blast nozzle!

Click for Buying Guide

• Up to 16dBA noise reduction
• Up to 45% less fatigue compared to standard blast nozzles
• Improved nozzle geometry
• New technology quick-connect nozzle silencer
• Durable and lightweight Silicon Nitride nozzle and silencer liner
• Slimline ergonomic nozzle jacket
• Standard contractor nozzle inlet thread
• 2 versions available
  • Standard Pressure Nozzle effective between 90-110 psi
  • Low Pressure (LPS) Nozzle effective between 70-90 psi
• FREE TRIAL AVAILABLE

• Refill kit for CSN Test Kit
• Used to measure surface contamination from Chlorides, Sulphates and Nitrates
• Comes in a Pack of 5 Tests
• Genuine Parts – Manufactured by ChlorRid

Experience unmatched durability and efficiency with the 1/4″ NPTM x 3/8″ NPSF High Pressure Union Adaptor, SKU: GR157705. A must-have for industrial applications!

• Robust Construction: Engineered for high-pressure environments.
• Versatile Compatibility: Fits 1/4″ NPTM and 3/8″ NPSF connections seamlessly.
• Leak-Proof Design: Ensures a secure, tight seal every time.
• Easy Installation: Quick and hassle-free setup.
• Corrosion Resistant: Withstands harsh industrial conditions.

Nozzle gaskets (aka nozzle washers) help reduce static electricity and nozzle wear.  Below is information on the various types:

• Brass or Aluminum nozzle holders.
  • For Medium thread (¾”), use HFGFBSP / NW-1.
  • For Contractor thread (2″), use HFGFBLP / NW-3.
  • For Fine thread (1-¼”), use HFGFBMP / NW-4.
• Nylon nozzle holders.
  • For 1″ (Narrow) Nozzle throat, use HFG25P / NW-25.
  • For 1-¼” (Wide) Nozzle throat, use HFG32P / NW-32.

Nozzle gaskets (aka nozzle washers) help reduce static electricity and nozzle wear.

• High Pressure Nipple for use as a spray hose joiner
• Use to connect two spray hoses which have female threads
• Available as a straight nipple or reducing nipple
• 7250 psi rated
• 30 degree internal seat, both ends
• Sold Individually

THe GMA SoftBlast Garnet Abrasive (SKU: P-GAFINE), is the softest abrasive in the GMA range, perfect for cleaning and polishing delicate surfaces. Achieving a surface profile of 0.5 – 1.0 mil (12 – 25µm) or less, it offers blasting rates up to 300 ft²/hr. With a low consumption rate of 0.75 – 2.0 lb/ft² and a recyclability rating of 1/10, this super fine garnet abrasive is ideal for tasks like historic monument cleaning, graffiti removal, and mold and mildew removal from log cabins.

• Super fine garnet abrasive for delicate surface work
• Surface profile of 0.5 – 1.0 mil for gentle cleaning and polishing
• Blasting rates up to 300 ft²/hr
• Low consumption rate for economical use
• Low dust factor for cleaner operations
• Mesh sizes of 200 and 350 for ultra-fine applications
• MilSpec approved, ensuring top quality
• Sold by the pallet (pallet minimum)
• Abrasive cannot be ordered online at this time

• Replacement part for the Control Line Pilot Valve
• Reduces wear on both the remote control exhaust valve and the abrasive metering valve.
• Provides sharp, clean and rapid deadman response.

• Suits Binks 2.8 gal Pressure Pot
• Lid Gasket for sealing the lid of the pressure pot to the pot
• Replace at the first sign of any cracks of wear
• Sold Individually

• Conventional, bleeder-style handle – do not use with Combo or Thompson valves
• RCC Aluminum “Bleeder” pneumatic remote control handle
• Large-lever design
• ¼” (6 mm) (supply) x ⅛” (3 mm) (return) threaded connectors
• Recommended upgrade to a non-breather deadman handle
• Genuine Parts – Manufactured by Clemco

• Dual Wheeled Trailer Mounted Blasting Package Including
  • BMS6.5 blast machine with Thompson® Valve outlet
  • 400 cfm AirPrep™ Air Dryer
  • 375 cfm 150 psi diesel air compressor
  • Breathing air filter
  • Carbon monoxide alarm
  • Tool box
  • Hose rack
  • Room for 1 skid of abrasive

This 34L Calibration Kit covers everything you need to perform bump tests on Bullard Clean Air Boxes.  Details as follows:

• Includes:
  • 34L canister of Zero Air
  • 34L canister of 10ppm Air
  • Regulator
  • Tubing
  • Fitting
  • Carrying Case
• The 34L gas canisters typically last about 25 tests.

NOTE:  This is considered HAZMAT for shipping purposes and cannot be shipped via air.

Graco’s industrial XP plural unit has been customized for EonCoat applications. It is similar to the XP35 with the 1:1 mix ratio and 3500 PSI delivery, and has the following changes:

1. The lower air is the 290cc SST DuraFlo.
2. The Air Motor is the XL6500.
3. The recirculation manifold is Stainless.
4. The gun is the PerformAA Automatic Air-Assisted version.

For a remote mix manifold, the recommended version is the GR24W861, available here.

Technology insertion to exponentially increase shipyard blast and coat production. COMPONENTS & FEATURES The individual technologies include, but are not limited to:

• Intelliblast Blast Pot Controls:
  • Smart controls that optimize blasting parameters for maximum efficiency and effectiveness.
• Snakebite Blasting Nozzles
  • High-performance nozzles designed for precise and powerful material removal, reducing blasting time and lowering process noise.
• Rapidly Deployable Containments
  • Innovative containment systems that can be quickly deployed, ensuring a controlled environment, and minimizing the spread of contaminants.
• Vortex Airflow Movement
  • Proprietary airflow design that lowers energy consumption, enhances ventilation, and ensures the efficient removal of particles from the blasting and painting areas.
• Combination Dual Air Plenums
  • Dual air plenums that provide a uniform and controlled airflow, optimizing the blasting and painting processes.
• Energy Recovery System (ERS)
  • An energy recovery system that captures and recycles heat energy, reducing overall energy consumption and operational costs

BENEFITS 

• Faster production cycles
• Reduced operational costs
• Enhanced environmental sustainability
• Improved worker safety

• Suits Western Techology 3500 LED Blast Light
• Inner glass lens protecs the LED assembly
• Simple to replace and repair in the field
• Sold as a Pack of 6

MPN:  3500LENS PK

• Replacement part for the PX4 Powered-Air Purifying Respirator system
• Prevents sparks from burning your HEPA filter
• Genuine RPB product

• Replacement Side Padding Covers cover the pads which enclose the blasters ears (NV3-733
• Suits RPB Nova3 Blast Helmet
• Are washable for hygienic reasons
• Sold as a set of 5 pairs (10 covers)

Genuine Parts – Manufactured by RPB Safety

• Suits All Breather Box Models
• Used to Calibrate Breather Box CO Sensors
• Kit includes;
  • 20PPM CO Carbon Monoxide in 17 Liter Disposable Cylinder
  • 0PPM Gas in 17 Liter Disposable Cylinder
  • 3/16″ Colder Plug
  • Regulator and Tubing
  • Comes in Hard Case
• Canister Pressure is 50psi
• Can not be Air Freighted, must go ground shipping
• Sold as a kit
• MFR # BBK-20
• Genuine Parts – Manufactured by Air Systems International

• Replacement filter for the PX4 Powered-Air Purifying Respirator
• Genuine RPB product

• Suits RPB Nova 3 Blast Helmet
• Replacement Side Wings, which encase the blasters head and ears
• Replace often for hygienic reasons
• Smaller heads = thicker paddings
• Larger heads = thinner paddings
• Sold as a pair of Padding Covers – Left & Right
• Genuine Parts – Manufactured by RPB Safety

BlastOne offers a selection of popular replacement Filter Cartridges for most dust collectors.  Additional details as follows:

• Suits Mobile Dust Collector Units, Blast Room Dust Collectors and Cabinet Dust Collectors
• Multiple media types available
  • 80/20 cellulose/poly.   (aka Cellulex®).  General purpose application. Merv 10 rated.
  • 80/20 treated cellulose/poly. (aka Endura-Tek™). General purpose filtration with increased resistance to moist air.  Merv 10.
  • Nano.  (aka UltraWeb).  Used when extra filtration efficiency is required – often in hazardous dust applications such as lead or asbestos.  Also offers longer life and lower energy requirements. Merv 15.
  • Spunbond UltraWeb.  Similar to standard Nano with increased resistance to moist air.  Merv 15.
  • All are available in standard or FR rating.  (Call or chat for pricing on FR versions)

Many more cartridge filter types available – see cross reference chart under the Documents tab.  If you don’t see what you need, chat or call 1-800-999-1881 with your questions.

Note:  Brand of product may vary.

• NIOSH certified
• Rated to N95 specification
• Offers protection against non-oil containing aerosols
• For use on 3M 5000 Series respirators and 6000 Series cartridges with 501 filter retainer
• Can be used with half mask and full face respirators
• Genuine 3M replacement part
• Case qty 100

• Suits ‘Chicago’ Quick Connect 2-Lug couplings
• 3-Way Splitter Coupling for air hose
• Use this item to split an air line into two lines
• Sold individually
• Genuine NECO part

• NIOSH approved for environments containing certain non-oil based contaminants
• Suits 3M™ 5000 Series Respirators or 6000 Series gas and vapor cartridges with 3M™ 501 Retainer
• Can use with half mask and full-face respirators
• Requires pre-filter retainer (NK58501)
• Use in conjunction with 3M particulate cartridge filters only
• Pack of 10

• Hi-flow Blast Pot Pusherline Kit
• Used on Blast Pots between the air control valves and the metering valve
• Sold as a complete assembly Including
  • Pusherline Air Hose
  • 1-¼” ball valve
  • 1-¼” Nut and tails with bolt style clamps for in-field installation
  • Does not include Metering Valve

The Radex® Mainline Filter Element (SKU: AP04929) is your ideal companion for advanced filtration needs with the Radex® Airline Filter:

• Exclusively designed for optimum performance with the Radex® Airline Filter.
• Ensures compatibility with Helmet Types: Nova 3 and Nova 2000 for greater versatility.
• Note: This product includes the filter element only. The mainline pre-filter (AP04927) is available separately to complement your filtration system.
• Carries the MPR: 04-929 badge, reaffirming Radex®’s commitment to quality and efficiency.

Upgrade your filtration game with the Radex® Mainline Filter Element, ensuring cleaner and safer air supply.

High-pressure brass pipe fitting for use with:

• NPT female threads: Air, Water, BSP and metric threads: air, natural gas, oil, water

The blast nozzle for the ConeBlast Internal Pipe Blaster is a key element in controlling the volume of air/abrasive flow.  It is subject to high wear and is a common replacement part.  Additional details:

• Sizes.  Two sizes are available, depending on the capacity of your compressed air source.
  • BNAFR8 requires 250CFM
  • BNARF10 requires 400CFM
  • (The size variants are interchangeable.)
• Construction.  These nozzles are made from tungsten carbide.  For large pipe-cleaning projects, contact us for options on longer-life versions.

The DeVilbiss MBC 510 full-sized manual paint gun has long been associated with conventional industrial applications.  Configurable as either Pressure or Suction feed, versions are available to handle a wide variety of coatings, including zinc-rich coatings.   Additional details:

• Heavy Duty.  Drop-forged aluminum body with nickel-plated brass fluid passages and stainless fluid tip / needle.
• Configurable.  Available in multiple setups, including:
  • Complete guns with air cap & fluid tip assemblies
  • Guns without air cap and retaining ring.
  • Complete guns for organic zinc applications, either water based or solvent borne.

• Kit comprised of all necessary components to upgrade your RPB® Radex Filter
• Will increase breathing air filtration for up to 6 blasters
• Couplings included!

• 30 Day Money Back Guarantee | Free Returns
• Replacement gaskets for ‘Chicago’ type Air King coupling
• Use to replace coupling gaskets when worn
• Sold in a pack of 10

• High-quality construction for long-lasting use
• Compatible with Western Technology 3475 LED Blast Light
• Easy installation process
• Enhances visibility and safety during blasting operations

• PiHab is a flexible abrasive blasting enclosure designed for easily adapting to pipes and beams etc….or any other structure that can be wrapped.
• Creates a encapsulation anywhere on a jobsite, especially in a working pipe area
• Kit comes with 5 PiHab bags, Viewing Window, Vaccum set up, Air input set up
• Genuine Parts – Manufactured by Pinovo in Norway
• Minimal Availability in USA – Request a quote/express interest

• Installed in the riser tube below the pop up valve of the blast pot
• Used to stop backflow of air into the control lines and valves
• Typically used when blasting with fine or dusty abrasives
• Suits 1″ riser tubes
• User will need to reduce current riser tube height to make this fit.
• Allows maximum pressure fluctuation without back flow of dust and abrasive.
• Sold individually
• Genuine Parts – Manufactured by Axxiom Manufacturing/Schmidt

• For holding 3M particulate filters
• Holds 5N11 (N95) filter & 5P71 pre-filter (sold separately)
• Works with 3M 5000 Respirator Series, 3M 6000 Cartridge Series, and 3M Filter Adapter 603
• Genuine 3M replacement part
• Retainer only

• Used on the MIST Blaster to enable an Emergency Stop
• Air Directional Control Valve Normally Closed Flow
• Hand Return
• 1/4 NPT
• 53 scfm
• Used for E-Stop

• Suits Breather Box Filtration System
• 115v AC Power Cord to power unit
• Sold Individually
• Genuine Parts – Manufactured by Air Systems International

Stainless Steel Shot

• Manufactured chronital stainless steel shot abrasive
• Can be recycled many times
• Stainless Steel Abrasives are also used in applications where there can be no ferrous contamination
• Used mainly in an air-blast application to create a specific desired finish or where a non-ferrous abrasive is required
• Sharp edges gradually round over as it wears
• Packed in 25kg bags
• Made by Vulkan Shot
• Grittal Stainless Steel Grit also available

AVAILABLE FOR RENTAL OR PURCHASE

• 235HP T4 Diesel Engine
• 3660 CFM, 28″ static pressure
• Mounted on 3-axle road legal trailer
• Will convey between 15-20 tons of abrasive per hour
• Primary Filtration – Coated Bags, pulse air cleaned
• Secondary Filtration – Pleated Cartridge
• Max Vacuum hose 6″
• Empty weight 13,950lbs
• Dimensions 21′ L x 8’2.5″ W x 11’4″ H

• 2, 4 & 6 Stall Options
• A range of Decontamination units are currently are available for purchase or rent.
• Suitable for lead paint projects with 6-20 men
• Has two showers, an airlock and larger change room.
• Has separate ‘Dirty’ entrance chamber and ‘Clean’ exit chamber
• Waste water filtration system and hot and cold showers
• A/C and heating Systems
• ‘Dirty’ room has HEPA (lead rated) negative air filtration

• Suits FMCF 4-Claw Crowsfoot Couplings
• Check coupling gaskets daily – worn gaskets will leak air
• Keep spares in your toolbox
• Come in a pack of 10
• Genuine NECO parts

• 2-claw Blast Hose QC Quick couplings
• Available in Brass, Aluminum, Steel and Nylon
• 2 types available – Standard and MegaMax.
  • NOTE:  MegaMax and Standard couplings require an adapter to fit together
• MegaMax couplings are Full-Flow, designed to remove the air restrictions caused by standard couplings and increases the PSI available to the nozzle.  The increased PSI is mostly beneficial when doing high-production blasting using 1.5″ or 2″ ID Blast Hoses.
• These are unthreaded couplings designed for blast hoses only. Threaded QC fittings are used on the metering valve outlet, and can be found HERE.
• Industry Size Commonly Referred to as Q1, Q-1, Q2, Q-2, Q3, Q-3, Q4, Q-4, Q6, Q-6

• • • FREE Shipping
    • 30 Day Money-Back Guarantee | Free Returns
    • IBIX Blaster is made from a 100% aluminum lightweight body
    • One of the most versatile and portable blasting units available
    • Weight Empty: 99 lbs.
    • Will run effectively off a 3/4″ air supply line
    • Capacity to hold 1 small bag of garnet – about 60 lbs.
    • Comes with 25ft of blast hose and blast gun
    • Genuine Parts – Manufactured by IBIX

• E-Xtreme Electric High Performance Airless Pump
• The Graco Z60 Sprayer is an electric alternative to air-operated single leg sprayers.
• It produces a smooth, consistent, evenly distributed spray pattern without the need to tow a large compressor.
• Will pressurize up to 6000psi working pressure
• Sprayer package in
  • Graco Z60 Electric Airless Pump
  • Includes Heavy Duty Cart
  • 3/8in x 15m Spray hose, 1/4in x 1.8m whip hose,
  • Graco XTR704 Spray gun with  XHD519 spray tip
• Genuine Products – Manufactured by Graco

The GMA Garnet ExcelCut WaterJet Abrasive, also known as P-GAWJ, is well-known for its top-notch precision and efficiency in waterjet cutting, making it a leading choice in the industry.

Revolutionizing Waterjet Abrasive Cutting with ExcelCut

ExcelCut is more than just an abrasive; it’s a testament to the relentless pursuit of perfection in waterjet cutting technology. By choosing ExcelCut, you are not just buying an abrasive; you are investing in a legacy of excellence and innovation.

Key Features and Benefits

• Unmatched Precision: The sharp, angular edges engineered into ExcelCut make it the ideal choice for tasks where accuracy is paramount. This precision enhances the quality of the final product, making it perfect for industries like aerospace, automotive, and manufacturing.
• Efficiency Redefined: In an industry where time is money, ExcelCut’s faster cutting capability means increased productivity and reduced operational costs. It’s not just about doing the job; it’s about doing it more efficiently.
• Top-Quality Material: The hardest almandine garnet used in ExcelCut ensures that it can withstand the most challenging cutting tasks, translating into longer-lasting performance and fewer replacements.
• Stringent Quality Control: Each batch of ExcelCut goes through a rigorous quality control process. This ensures uniformity in particle size and the absence of unwanted dust, leading to a cleaner cut and a safer work environment.
• Military-Grade Approval: ExcelCut’s adherence to MilSpec standards is a testament to its reliability and durability, making it the preferred choice in sectors that require the highest level of precision and quality.
• Convenient Packaging and Availability: Available for purchase by the pallet, ExcelCut ensures that you have a consistent supply for large-scale projects. While online ordering is not available, our dedicated customer service team can assist with orders and any inquiries.

The Impact of ExcelCut in Various Industries

The versatility of the GMA Garnet ExcelCut Water Jet Abrasive extends across multiple industries. In the world of architecture and design, ExcelCut enables the creation of intricate designs in materials like stone, glass, and metal. Its precision cutting capability is invaluable in the fabrication of complex parts in the automotive industry, where every millimeter matters. In the aerospace sector, the reliability and accuracy of ExcelCut play a crucial role in manufacturing components that meet strict safety standards.

Moreover, in the realm of custom fabrication and signage, ExcelCut offers the flexibility to create detailed and precise cuts, turning creative visions into reality. Its efficiency and precision are also crucial in the defense industry, where high-quality cuts are essential for the production of critical components.

Why Choose GMA Garnet ExcelCut?

When it comes to waterjet cutting, the choice of abrasive can make a significant difference in the outcome of your project. GMA Garnet ExcelCut stands out for its superior quality, efficiency, and precision. By choosing ExcelCut, you are not just selecting an abrasive; you are choosing a partner in precision that will elevate the quality of your work to new heights. With our extensive experience and commitment to innovation, GMA Garnet continues to lead the industry, setting new standards for excellence in waterjet cutting solutions.

For inquiries, detailed product specifications, or to place an order, please contact our customer service team. We are here to help you achieve the best results in your waterjet cutting projects.

• Essential Safety Item for Megablaster Pot closures
• Designed and installed on all Schmidt Bulk Pots since release in 2010
• Able to be retrofitted to Schmidt Bulk Pots in any of BlastOne Locations
• Ensures that correct operating procedures are followed when opening the fill port.
• Fits over camlock bolts and ensures all bolts remain in the lugs until all cams are fully disengaged, ensuring that the lid can not blow open
• Genuine Parts – Manufactured by Schmidt – Axxiom Manufacturing

Easily double the capability of your Warrior (aka Triton 308) conventional spray pump by adding this valve kit. Includes all necessary fittings.

Kit does not include spray line or gun for the second operator. See here for available gun options.

See here for available spray/air line options.

• Suits GX4 Gas Monitor
• Designed to keep the GX4 protect from the rigors of contractor treatment
• Includes bracket for mounting the GX4
• Weather tight to keep the rain off the electronics
• Sold Individually
• MFR # 08-424
• Genuine Parts – Manufactured by RPB Safety

• Deadman-operated control valve (solenoid)
• Uses an electric or pneumatic charge to push over the shuttle which opens ports to control the deadman system
  • Provides sharp, clean and rapid response
  • Improves safety
• Installs between twinline and inlet valve
• Reduces wear on both the remote control exhaust valve and the abrasive metering valve

The Axxiom TeraValve – the next generation abrasive metering valve for blast machines with pressure-hold technology.  Featuring:

• Extended Life.  Schmidt XL technology utilizes tough metal alloys and internal wipers, reducing premature wear due to dust migration.
• Easy Interchangeability.  Customers with older Thompson valves that need rebuilt have an easy alternative.  Exchange the old valve with a new TeraValve with no modifications required!
• Efficient.  Pressure-hold design maintains pressure in the pot, even with deadman released.  This can save up to 15% of abrasive when your projects involve a lot of start-stop blasting.  Reduces expensive compressed air consumption too!
• Economical.  The compact design of the TeraValve actually costs less than the previous-gen Thompson II valve.
• Available for more applications.  Pressure-release pots with limited clearance (where traditional Thompson Valves do not fit) can also benefit. Efficient pressure-hold technology can be used on any blast pot with a minimum of 6″ clearance by installing a TeraValve retrofit kit.
• Genuine Parts – Manufactured by Schmidt® / Axxiom Manufacturing

Note:  Diaphragm-activated piston requires minimum of 75 psi control pressure

The genius behind the GX4 is the cartridge system.  Following are the features and benefits.

• Sensors currently are available for CO (carbon monoxide), O2 (oxygen) and HS2 (hydrogen sulfide).
• Replacement cartridge come sealed and are factory calibrated for easy in-field installation
• Very easy to replace and prevents having to send your monitor into the factory for calibration.  (Calibration checks should be performed regularly.)
• Sensors have up to a 2 year life from date of manufacture (unless prematurely fouled)
• Genuine Parts – Manufactured by GVS / RPB Safety

• Suit Clemco Blast Pots
• Replacement pop-up valve with External Pop up sleeve
• Designed to go over the riser tube to help minimize backward flowing abrasive
• Also work when you have a low pressure and volume of air
• Only needed because Clemco inlet and outlet valves are slow to close
• Seating rings sold separately – BAP5

• Will transform your blast pot into a pressure hold system
• Retrofit Kit includes:
  • Thompson® Valve Series II Metering Valve
  • Full pusherline kit
  • Automatic air valve and all interconnecting hoses
  • Control line strainer and control valve
  • Response deadman handle and Twinline
  • Does not include muffler or pressure relief valve pictured
• Genuine Parts – Manufactured by Schmidt® / Axxiom Manufacturing

• HFSTC3 blast coupling included
• Designed for use with coarse metallic abrasives
• Heavy cast iron construction
• Not recommended for use with fine abrasives
• 1 1/2″ NPT female thread air connection
• Recommended upgrade: MicroValve 3

• Exclusive FlexSeal needle – extends need life life by up to 70%
• Reduced gun spitting – less paint left between needle and tip
• Ergonomic design – form-fitted handle for max comfort and control
• Trigger lock – easy trigger pull with thumb-engaged safety lock
• East out gun filter – interchangeable with all Contractor series guns