Slag Abrasives
Welcome to our category page for coal and copper slag blasting abrasive media! If you are in need of a reliable and effective abrasive media, look no further. Both coal slag and copper slag are popular choices for a variety of surfaces and applications.
Coal slag is a byproduct of coal-burning power plants and is a widely available and economical abrasive media. It is known for its sharp, angular edges and hard, durable nature, making it a great choice for tough surfaces that require a more aggressive abrasive media.
Copper slag is another popular choice for abrasive blasting. It is a byproduct of copper production and is known for its fast cutting speed and low dust levels. Copper slag is also non-toxic, making it a safer choice for users and the environment.
Showing all 6 results
-
- Multi-Purpose abrasive used for Sandblasting a variety of substrates, especially steel and concrete.
- Angular particle shape creates a profile on steel, with only minimal embedment into the surface.
- Mohs Hardness of 6-7
- Bulk Density: 75-100 lbs/ft2
- Less then 0.1% free silica
- Not Recommended for blasting on stainless or aluminum
- Comes in many different grades and packaging sizes
- Non-Recycling
- QPL Approved and MIL Spec approved abrasives available from select plants
- SSPC AB-1 Approved
- Sold by the pallet (pallet minimum)
- Abrasive cannot be ordered online at this time
-
- Black Beauty Iron Copper Slag is a high-density slag abrasive for sand blasting
- Less then 0.1% free silica
- Mohs Hardness of 6-7
- Bulk Density: 100-120 lbs/ft2
- Not Recommended for blasting on stainless or aluminum
- Comes in many different grades and packaging sizes
- Non-Recycling
- Passes 40CFR 261.24a (TCLP)
- Passes SSPC AB-1
- Sold by the pallet (pallet minimum)
- Abrasive cannot be ordered online at this time
-
- General Purpose abrasive used for Sandblasting
- Angular shape creates a profile on steel
- Mohs Hardness of 6-7
- Bulk Density: 75-100 lbs/ft2
- Less then 0.1% free silica
- Not Recommended for blasting on stainless or aluminum
- Comes in many different grades and packaging sizes
- Non-Recycling
- Meets SSPC-AB 1 Standard
- Sold by the pallet (pallet minimum)
- Abrasive cannot be ordered online at this time
-
- Blastox® is a patented formula designed by TDJ to be mixed with Coal or Copper Slag to be used in Lead Abatement Projects
- Allows a One Step process, the formula is mixed with the abrasive and when collected it stabilizes heavy metals to render them as a non-hazardous waste.
- Passes TCLP, MEP, SPLP and Fresh Water Leach Tests.
- Stabilizes heavy metals like lead paint by ph adjustment, chemical reactions and encapsulation.
- Sold by the pallet (pallet minimum)
- Abrasive cannot be ordered online at this time
-
- Copper Slag AKA Iron Silicate abrasive used for Sandblasting
- Angular shape creates a profile on steel
- Mohs Hardness of 7
- Bulk Density: 100-120 lbs/ft2
- Less then 0.1% free silica
- Not Recommended for blasting on stainless or aluminum
- Comes in many different grades and packaging sizes
- Non-Recycling
- Meets SSPC-AB 1 Standard
- Sold by the pallet (pallet minimum)
- Abrasive cannot be ordered online at this time
-
- Nickel Slag produced by Green Diamond Abrasives
- Available in fine, medium, coarse, and extra coarse grit size
- Individual bag or Bulk bag available
- Approved to SSPC AB1 Standard
- Shape - Angular/Sub-Angular
- Mohs Hardness of 7
- Bulk Density of 85 to 105 lbs/ft2
- Sold by the pallet (pallet minimum)
- Abrasive cannot be ordered online at this time