My Account
Respiratory, Safety & PPE
Breathing Air Filtration & Monitors
Paint Respirator Lenses
Facility & Site Safety
PPE
Clothing
Showing 61–75 of 285 results
-
- Lenses designed to fit the Bullard 88 Blast Helmet
- Sold by the Pack
- Three Part Lense system
- Inner Lens - Your thick eye protection layer
- Outer Lens - Protects the more costly inner lens
- Tear-off Lens - Allows you to tear it off and keep blasting
-
The GX4 is a smart, sophisticated gas monitor designed to keep your employees safe and your company compliant with breathing air safety standards. Features as follows:
- Capable. Monitors up to 4 gases simultaneously, including CO (carbon monoxide), O2 (oxygen), and HS2 (hydrogen sulfide) using the GVS Cartridge Sensors.
- Note: Unit comes standard with the CO cartridge only. Cartridges never need calibrating and last up to 2 years. Regular calibration checks to be performed by using the GVS / RPB GX4 Calibration Test Kit.
- Intelligent. Continuously logs real-time data such as gas concentration, air temperature, unit status, etc.
- Connected. Utilize access to your company's network or connect directly with your device using the built-in Wi-Fi Hotspot mode.
- Flexible. Powered by either a 12 volt vehicle battery clips (using cable with battery clips) or by a rechargeable Lithium battery.
- Safe. Built-in 103db alarm demands attention when unit detects the contaminants above the programmed levels. For the ultimate in safety, choose the version with RZ fittings. The RZ fittings are designed to work only with GVS / RPB breathing air equipment and cannot be accidentally connected to shop nitrogen lines. Note: Using RZ fittings will require use of breathing air line and respirators with these fittings as well.
- Customizeable. The following options are available:
- GX4 Heavy Duty Field Case - protects your investment when your projects are remote.
- GX4 Auxiliary Strobe Light / Alarm / Cable
- Can be surface or wall-mounted using the GX4® wall bracket - or mounted directly to an RPB® Radex Airline Filter.
- Genuine Product - Manufactured by GVS/RPB® and NIOSH approved with the Radex Breathing Air filter.
AVAILABLE FOR RENTAL OR PURCHASE
- Capable. Monitors up to 4 gases simultaneously, including CO (carbon monoxide), O2 (oxygen), and HS2 (hydrogen sulfide) using the GVS Cartridge Sensors.
-
APCMBCOHPThe Bullard COHP is a stand-alone Carbon Monoxide monitor, and is designed to be used in tandem with a Bullard breathing air canister filtration system. Additional details include:
- Does NOT remove carbon monoxide - this is a monitor only.
- This 10PPM unit is intended for the USA market. (5PPM versions available for other Canada and other markets.)
- Provides audible (90dB) and visual alarms when high CO, low battery, or low airflow conditions are present.
- Operates on either AC or DC power.
APCMBCOHPThe Bullard COHP is a stand-alone Carbon Monoxide monitor, and is designed to be used in tandem with a Bullard breathing air canister filtration system. Additional details include:- Does NOT remove carbon monoxide - this is a monitor only.
- This 10PPM unit is intended for the USA market. (5PPM versions available for other Canada and other markets.)
- Provides audible (90dB) and visual alarms when high CO, low battery, or low airflow conditions are present.
- Operates on either AC or DC power.
-
APCMFCABCKThis 34L Calibration Kit covers everything you need to perform bump tests on Bullard Clean Air Boxes. Details as follows:
- Includes:
- 34L canister of Zero Air
- 34L canister of 10ppm Air
- Regulator
- Tubing
- Fitting
- Carrying Case
- The 34L gas canisters typically last about 25 tests.
APCMFCABCKThis 34L Calibration Kit covers everything you need to perform bump tests on Bullard Clean Air Boxes. Details as follows:- Includes:
- 34L canister of Zero Air
- 34L canister of 10ppm Air
- Regulator
- Tubing
- Fitting
- Carrying Case
- The 34L gas canisters typically last about 25 tests.
Part Number Purchase Price APCMFCABCK $577.50 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$577.50
-
- Includes:
-
The Radex airline filter (aka canister filter) is the heart of the GVS / RPB breathing air system. Features as follows:
- Advanced Filtration. 6-stage filtering removes oils, odors, moisture, and particulates from breathing air
- Durable. Cast aluminum construction for lightweight durability on jobsites as well as in factories.
- Flexible. Can be either floor or wall mounted using the included twist-and-lock bracket
- Customizable. Comes with either 2-outlets (1 for an operator and 1 for the CO monitor) or 6 outlets. And if you already have a 2-outlet version and need to upgrade to 6, this can be done with the Radex Six Outlet Upgrade Kit.
- Other included features.
- 150 PSI safety pressure relief valve
- Quick Connect outlet ports
- Brass manual drain tap
- Pressure regulator to adjust outlet air pressure
- Replaceable APF3100 filter element (lasts up to 3 months or 400 working hours)
- Options.
- Auto Drain Unit. Automatically drains moisture from Radex, helping to prevent premature failure to the filter element due to maintenance oversight.
- Micro Mist Filter. Further removes moisture and oil. Recommended if compressor has possible moisture or oil blow-by issues. Reduces chance of oil contamination of CO monitor sensor.
- Mainline Pre-Filter. Extra support for particulate removal down to 0.15 microns and extends life of primary filter element.
- 2-claw “Chicago” fitting, #FMAKM12A. Note: This is not included with the filter unit and must be purchased separately. Used to connect the filter to the supply hose from the air compressor.
NOTE: This unit does not filter or monitor carbon monoxide (CO). It is designed to be used with the RPB GX4 Carbon Monoxide monitor.
-
The BlasterAll Premium Leather Blasting Gloves (SKU: P-NABLASTERALL) combine superior abrasion resistance, ANSI Cut Level 4 protection, and touchscreen compatibility for enhanced safety and convenience during blasting operations. Available in sizes XS to 2XL, these gloves provide unparalleled comfort and durability.
Key Features:
- Leather exterior for excellent abrasion resistance
- Kevlar lining with ANSI Cut Level 4 protection
- 7-inch gauntlet for extended forearm coverage
- Touchscreen-compatible fingertips for device use
- Available in sizes XS to 2XL
- Coordinates with BlasterAll Coveralls for complete protection
-
The latest member of our BlasterAll® family of products is our new Rigger gloves. It's styled like the original BlasterAll® blasting gloves, but without the extended gauntlet for more convenient every day use. Features include:
- Leather exterior for good abrasion resistance
- Extended cut resistance with Cut Level 5 Kevlar® lining
- Stylish & Comfortable design
- Touch-screen finger tip on index finger
- Extended size selection from X-Small to 2XL-Large
-
One size fits all general purpose leather work glove.
- Generous length gauntlet for lower arm protection
- Abrasive resistant threads provides longer life than normal ‘welding gloves’
- Tough, suede finish provides additional gripping power
- Available by the pair with discounts in dozen and case (5 dozen) quantities.
- Also see BlastOne's new BlasterAll Premium Leather Blasting Gloves
-
NA230RPB
- Tough, rough - grain finish
- Abrasive resistant Kevlar threads provides longer life than normal 'welding gloves'
- Generous length gauntlet for lower arm protection and soft cotton inner lining for comfort
- Also see BlastOne's new BlasterAll Premium Leather Blasting Gloves
NA230RPB- Tough, rough - grain finish
- Abrasive resistant Kevlar threads provides longer life than normal 'welding gloves'
- Generous length gauntlet for lower arm protection and soft cotton inner lining for comfort
- Also see BlastOne's new BlasterAll Premium Leather Blasting Gloves
-
Experience safety and comfort with the Bullard Heavy Duty unlined leather Blast Gloves. Crafted using resilient Kevlar thread, these gloves are a fortress for your hands.
- Extra-long 8-inch cuff: Maximum forearm protection
- Kevlar thread construction: Exceptional strength and durability
- Reinforced cowhide palm: Enhanced grip and resilience
- Pre-curved fingers: Optimal hand mobility
- Available in sizes Medium - XX-Large
- Sold by the pair or in a pack of 6
-
Step up your hand protection with our Goat Skin Leather Driver Gloves, SKU: P-NA206. Combining value and durability, these unlined gloves offer sleek comfort and superior flexibility for everyday wear.
- Available in sizes S to XXL.
- Sold by the pair.
- Quantity and bulk discounts available.
-
APCMB8428RZ
- Air Supply Hose RZ Fitting (08-428-RZ)
- Use with GX4
- Genuine RPB product
APCMB8428RZ- Air Supply Hose RZ Fitting (08-428-RZ)
- Use with GX4
- Genuine RPB product
Part Number Purchase Price APCMB8428RZ $38.20 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$38.20
-
-
APCMB8450
- Calibration Adapter (08-450)
- Use with GX4 Gas Monitor
- Genuine RPB product
APCMB8450- Calibration Adapter (08-450)
- Use with GX4 Gas Monitor
- Genuine RPB product
-
APCMB8470
- External Flow Regulator (08-470)
- Use for GX4 Gas Monitor
- Genuine RPB product
APCMB8470- External Flow Regulator (08-470)
- Use for GX4 Gas Monitor
- Genuine RPB product
-
APCMB8429
- M5 Inlet Filter (08-429)
- Use for GX4
- Genuine RPB product
APCMB8429- M5 Inlet Filter (08-429)
- Use for GX4
- Genuine RPB product
