My Account
Respiratory, Safety & PPE
Breathing Air Filtration & Monitors
Paint Respirator Lenses
Facility & Site Safety
PPE
Clothing
Showing 31–45 of 262 results
-
Z4 - The lightest-weight welding respirator in the world in its class! The Z4® from GVS / RPB is designed to do one thing, and do it very well: Provide comfortable protection while welding. A few features:- Superior comfort.
- Very light-weight - only 28.4 ounces with ADF and cape when equipped with standard head suspension
- Dual air-distribution system, delivers 75% of air supply to breathing zone and 25% across the visor to prevent fogging.
- Adjustable head suspension system ergonomically balanced to reduce fatigue
- Flip-up visor. When up, the visor reveals the clear safety lens, maintaining respiratory protection during inspection, grinding, etc.
- High protection with the following ANSI approvals:
- Hearing (S3.19) when used in conjuction with the Quiet-Slim™ earmuffs. (See below in Options list.)
- Eye and Face (Z87+)
- Welding Eye (Z87w)
- Great optics! Highest quality wide-view ADF lens available. (Additional details available on brochure under documents tab.)
- Head Suspension Options.
- New! Bump cap version shields your head from unwanted knocks
- Original head-harness is fully adjustable for size
- Air Control Options. Both supplied-air and battery-powered PAPR systems are available as follows:
- Constant Flow Valve: Basic supplied-air valve allows control of air volume in hood, but doesn't provide air cooling.
- C40: Premium supplied-air valve allows full control over both air volume and temperature. Cools up to 52 degrees!
- HX5: Basic PAPR option with single speed fan control, audible, and visual alarms.
- PX5: Premium PAPR option with multiple fan speeds, audible, visual, and vibratory alarms. (Great for noisy environments!)
- Note: PAPR units do not require tethering to an air-line (making them very portable), but do not provide air cooling (can't use with C40).
- Note: Z4® Headtops without any breathing apparatus are also available. Shown in product grid below. Includes air connection fitting.
- Cape / Seal Configurations.
- Zytec FR Shoulder Cape
- Zytek FR Face Seal
- Optional Accessories
- Vision-Link™ Rechargeable Light, mounts to respirator helping to illuminate dim work areas
- Comms-Link™ In-Helmet Communication, utilizes existing 2-way radio systems.
- Comfort Side Padding System adds even more comfort with adjustable foam padding.
- Bump Cap option can be purchased separately, or in a package as shown in the product grid below.
- Quiet-Slim™ helmet-mounted ear muffs provides rated hearing protection for noisy environments.
- Ultra Magnifying Lens with choice of magnification
- Superior comfort.
-
Apollo respirators use a traditional 3-lens system for operator safety and convenience. BlastOne offers a complete line of both aftermarket (shown herein) and genuine OEM Clemco lenses.
-
-
- Suits Nova 3 Blast Helmet
- Genuine lenses are your only guarantee of safety - insist on them in your business
- Three-part lens system consists of:
- Standard Clear Inner lens – thick eye protection layer - meets ANSI Z87.1 standard. Comes 10 per pack (20 packs per case)
- Optional Tinted inner lens - Helps when blasting in bright sunlight
- Outer lens – protects the more costly inner lens. Comes 50 per pack (10 packs per case)
- Tear-off lens – save time when the lens gets frosted - Use tear away lenses over Outer lenses. Comes 50 per pack. (20 packs per case)
- Save even more time with the Cassette Lens - these are pre-assembled with 5 tear-off lenses sealed to 1 outer lens. Keeps dust from getting between the layers too! Comes 20 cassettes per box.
- Sold by the pack (Cassettes by the box)
- Click for Nova 2000 Lenses
-
-
- Suits Nova 2000 Blast Helmet
- Genuine lenses are your best protection - no other brand offers NIOSH certification.
- Three-part lens system consists of:
- Standard Clear Inner lens – thick eye protection layer which meets ANSI Z87.1 standard. Comes 10 per pack (20 packs per case).
- Optional Tinted Inner lens - Helps when blasting in bright sunlight.
- Outer lens – Protects the more costly inner lens. Available in Standard or Thin. Comes 50 per pack (10 packs per case)
- Tear-off lens – Allows for easy tear off with no down time. Contains a unique pre-folded tab to ensure that the blaster can only remove one spent lens at a time. Comes 50 per pack (10 packs per case)
- Sold by the pack
- Click for Nova 3 Lenses
-
Genuine OEM lenses (aka blast shields) help keep your Bullard 88 blast hood NIOSH compliant. The details on the various versions of are as follows:
- Three Part Lens System includes:
- Inner Lens.
- 40 mil, clear, oval
- Outer Lens. Available in the following variations:
- 15 mil, clear, rectangular
- 15 mil, clear, rectangular w/protective film on both sides of lens
- 20 mil, clear, oval
- 30 mil, smoke tint, oval
- 40 mil, clear, oval
- 42 mil, green tint, oval
- Tear-off Lens. Available in the following variations.
- Perforated (Set of 5 individual tear-off lenses sealed together, saves time.) Packed 5 perforated sets (25 total lenses) per package.
- Adhesive backed (Individual tear-off lenses with adhesive strips.) Packed 25 lenses per package.
- Inner Lens.
- Packaging:
- Available in single packs, or in case quantities at reduced pricing.
- Three Part Lens System includes:
-
Upgrade your Bullard GVX blast hood with Bullard GenVX Genuine OEM Lenses, SKU: P-HVBGVXOEM. These lenses, designed to maintain NIOSH compliance, offer superior visibility and protection for blasting operators.
- Three-part lens system: Inner Lens (40 mil clear), Outer Lens (various thicknesses and tints), Tear-off Lens (perforated or adhesive backed).
- Available in single packs or bulk case quantities.
- Essential for maintaining visibility and protection during abrasive blasting.
-
- Lenses designed to fit the Bullard GenVX blast helmet
- Often called Blast Shields
- Sold by the Pack
- Three Part Lens system
- Inner Lens - Your thick eye protection layer
- Outer Lens - Protects the more costly inner lens
- Tear-off Lens - Allows you to tear it off and keep blasting
-
- Lenses designed to fit the Bullard 88 Blast Helmet
- Sold by the Pack
- Three Part Lense system
- Inner Lens - Your thick eye protection layer
- Outer Lens - Protects the more costly inner lens
- Tear-off Lens - Allows you to tear it off and keep blasting
-
The GX4 is a smart, sophisticated gas monitor designed to keep your employees safe and your company compliant with breathing air safety standards. Features as follows:
- Capable. Monitors up to 4 gases simultaneously, including CO (carbon monoxide), O2 (oxygen), and HS2 (hydrogen sulfide) using the GVS Cartridge Sensors.
- Note: Unit comes standard with the CO cartridge only. Cartridges never need calibrating and last up to 2 years. Regular calibration checks to be performed by using the GVS / RPB GX4 Calibration Regulator Kit.
- Intelligent. Continuously logs real-time data such as gas concentration, air temperature, unit status, etc.
- Connected. Utilize access to your company's network or connect directly with your device using the built-in Wi-Fi Hotspot mode.
- Flexible. Powered by either a 12 volt vehicle battery clips (using cable with battery clips) or by a rechargeable Lithium battery.
- Safe. Built-in 103db alarm demands attention when unit detects the contaminants above the programmed levels. For the ultimate in safety, choose the version with RZ fittings. The RZ fittings are designed to work only with GVS / RPB breathing air equipment and cannot be accidentally connected to shop nitrogen lines. Note: Using RZ fittings will require use of breathing air line and respirators with these fittings as well.
- Customizeable. The following options are available:
- GX4 Heavy Duty Field Case - protects your investment when your projects are remote.
- GX4 Auxiliary Strobe Light / Alarm / Cable
- Can be surface or wall-mounted using the GX4® wall bracket - or mounted directly to an RPB® Radex Airline Filter.
- Genuine Product - Manufactured by GVS/RPB® and NIOSH approved with the Radex Breathing Air filter.
- Capable. Monitors up to 4 gases simultaneously, including CO (carbon monoxide), O2 (oxygen), and HS2 (hydrogen sulfide) using the GVS Cartridge Sensors.
-
APCMBCOHPThe Bullard COHP is a stand-alone Carbon Monoxide monitor, and is designed to be used in tandem with a Bullard breathing air canister filtration system. Additional details include:
- Does NOT remove carbon monoxide - this is a monitor only.
- This 10PPM unit is intended for the USA market. (5PPM versions available for other Canada and other markets.)
- Provides audible (90dB) and visual alarms when high CO, low battery, or low airflow conditions are present.
- Operates on either AC or DC power.
APCMBCOHPThe Bullard COHP is a stand-alone Carbon Monoxide monitor, and is designed to be used in tandem with a Bullard breathing air canister filtration system. Additional details include:- Does NOT remove carbon monoxide - this is a monitor only.
- This 10PPM unit is intended for the USA market. (5PPM versions available for other Canada and other markets.)
- Provides audible (90dB) and visual alarms when high CO, low battery, or low airflow conditions are present.
- Operates on either AC or DC power.
-
APCMFCABCKThis 34L Calibration Kit covers everything you need to perform bump tests on Bullard Clean Air Boxes. Details as follows:
- Includes:
- 34L canister of Zero Air
- 34L canister of 10ppm Air
- Regulator
- Tubing
- Fitting
- Carrying Case
- The 34L gas canisters typically last about 25 tests.
APCMFCABCKThis 34L Calibration Kit covers everything you need to perform bump tests on Bullard Clean Air Boxes. Details as follows:- Includes:
- 34L canister of Zero Air
- 34L canister of 10ppm Air
- Regulator
- Tubing
- Fitting
- Carrying Case
- The 34L gas canisters typically last about 25 tests.
Part Number Purchase Price APCMFCABCK $577.50 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$577.50
-
- Includes:
-
The Radex airline filter (aka canister filter) is the heart of the GVS / RPB breathing air system. Features as follows:
- Advanced Filtration. 6-stage filtering removes oils, odors, moisture, and particulates from breathing air
- Durable. Cast aluminum construction for lightweight durability on jobsites as well as in factories.
- Flexible. Can be either floor or wall mounted using the included twist-and-lock bracket
- Customizable. Comes with either 2-outlets (1 for an operator and 1 for the CO monitor) or 6 outlets. And if you already have a 2-outlet version and need to upgrade to 6, this can be done with the Radex Six Outlet Upgrade Kit.
- Other included features.
- 150 PSI safety pressure relief valve
- Quick Connect outlet ports
- Brass manual drain tap
- Pressure regulator to adjust outlet air pressure
- Replaceable APF3100 filter element (lasts up to 3 months or 400 working hours)
- Options.
- Auto Drain Unit. Automatically drains moisture from Radex, helping to prevent premature failure to the filter element due to maintenance oversight.
- Micro Mist Filter. Further removes moisture and oil. Recommended if compressor has possible moisture or oil blow-by issues. Reduces chance of oil contamination of CO monitor sensor.
- Mainline Pre-Filter. Extra support for particulate removal down to 0.15 microns and extends life of primary filter element.
- 2-claw “Chicago” fitting, #FMAKM12A. Used to connect the filter to the supply hose from the air compressor.
-
BlastOne BlasterAll Blasting Gloves feature:
- Leather exterior for good abrasion resistance
- ANSI Cut Level 4 Kevlar lining and 7 inch gauntlet provides extra protection for hand and forearm
- Stylish & Comfortable design
- Touch-screen finger tips allows answering mobile devices without removing the gloves
- Extended size selection from X-Small to 2X-Large
- Coordinates with BlastOne BlasterAll Coveralls available here
-
The latest member of our BlasterAll® family of products is our new Rigger gloves. It's styled like the original BlasterAll® blasting gloves, but without the extended gauntlet for more convenient every day use. Features include:
- Leather exterior for good abrasion resistance
- Extended cut resistance with Cut Level 5 Kevlar® lining
- Stylish & Comfortable design
- Touch-screen finger tip on index finger
- Extended size selection from X-Small to 2XL-Large
-
One size fits all general purpose leather work glove.
- Generous length gauntlet for lower arm protection
- Abrasive resistant threads provides longer life than normal ‘welding gloves’
- Tough, suede finish provides additional gripping power
- Available by the pair with discounts in dozen and case (5 dozen) quantities.
- Also see BlastOne's new BlasterAll Premium Leather Blasting Gloves
