Respiratory, Safety & PPE
Showing 1–15 of 285 results
-
HLAPL22815The Clemco 7/8 Inch O-Ring (MPN: 22815) is a genuine replacement part designed for breathing tubes in Clemco Apollo 600, 60, and 20 respirators. This O-ring ensures a secure and airtight seal, maintaining optimal airflow and safety during abrasive blasting. Easy to replace, it’s a must-have for maintaining respirator performance. Features:
- Compatibility: Fits Apollo 600, 60, and 20 respirator breathing tubes.
- Secure Seal: Prevents air leaks for reliable airflow.
- Genuine Replacement: Manufactured by Clemco for dependable performance.
- Easy Installation: Quick and hassle-free replacement.
HLAPL22815The Clemco 7/8 Inch O-Ring (MPN: 22815) is a genuine replacement part designed for breathing tubes in Clemco Apollo 600, 60, and 20 respirators. This O-ring ensures a secure and airtight seal, maintaining optimal airflow and safety during abrasive blasting. Easy to replace, it’s a must-have for maintaining respirator performance. Features:- Compatibility: Fits Apollo 600, 60, and 20 respirator breathing tubes.
- Secure Seal: Prevents air leaks for reliable airflow.
- Genuine Replacement: Manufactured by Clemco for dependable performance.
- Easy Installation: Quick and hassle-free replacement.
-
HLAPL23811The Clemco Apollo 600 Air Baffle (MPN: 23811) is a genuine replacement part designed for both high-pressure (HP) and low-pressure (LP) Apollo 600 respirator helmets. This air baffle ensures proper airflow distribution, enhancing operator comfort and safety. Easy to replace, it is a critical component for maintaining helmet performance. Features:
- Compatibility: Fits both Apollo 600 HP and LP models.
- Genuine Replacement: Manufactured to Clemco’s exacting standards for reliable performance.
- Enhanced Airflow: Ensures optimal air distribution within the helmet.
- Easy Installation: Simple and quick to replace.
HLAPL23811The Clemco Apollo 600 Air Baffle (MPN: 23811) is a genuine replacement part designed for both high-pressure (HP) and low-pressure (LP) Apollo 600 respirator helmets. This air baffle ensures proper airflow distribution, enhancing operator comfort and safety. Easy to replace, it is a critical component for maintaining helmet performance. Features:- Compatibility: Fits both Apollo 600 HP and LP models.
- Genuine Replacement: Manufactured to Clemco’s exacting standards for reliable performance.
- Enhanced Airflow: Ensures optimal air distribution within the helmet.
- Easy Installation: Simple and quick to replace.
-
HLAPL500
The Clemco Apollo 600 Cape, Silver/Gray w/Red Inner Collar (MPN: 23818) is a heavy-duty protective cape designed for abrasive blasting operators. Its silver-gray exterior reflects sunlight to minimize heat absorption, keeping operators cool, while providing reliable protection from abrasive rebound.
Features:
- Durable Construction: Heavy-duty design for long-lasting protection.
- Sunlight Reflection: Silver-gray exterior reduces heat absorption.
- Enhanced Safety: Shields operators from abrasive rebound.
- Comfortable Design: Includes a red inner collar for a secure and comfortable fit.
HLAPL500The Clemco Apollo 600 Cape, Silver/Gray w/Red Inner Collar (MPN: 23818) is a heavy-duty protective cape designed for abrasive blasting operators. Its silver-gray exterior reflects sunlight to minimize heat absorption, keeping operators cool, while providing reliable protection from abrasive rebound.
Features:
- Durable Construction: Heavy-duty design for long-lasting protection.
- Sunlight Reflection: Silver-gray exterior reduces heat absorption.
- Enhanced Safety: Shields operators from abrasive rebound.
- Comfortable Design: Includes a red inner collar for a secure and comfortable fit.
-
HLAPLDLXSUSKIT
The Clemco Apollo 600 DLX Padded Suspension Kit (MPN: 25189) is a replacement suspension kit designed for enhanced comfort and stability during blasting operations. Specifically made for the Clemco Apollo 600 respirator, this kit includes all necessary padding and suspension components for a secure and comfortable fit.
Features:
- Compatible with the Clemco Apollo 600 respirator.
- Includes top pad, suspension web, middle pad, side pad, and hook-fastener tape.
- Provides improved comfort and support for extended wear.
- Easy to install, replacing worn or damaged suspension components.
HLAPLDLXSUSKITThe Clemco Apollo 600 DLX Padded Suspension Kit (MPN: 25189) is a replacement suspension kit designed for enhanced comfort and stability during blasting operations. Specifically made for the Clemco Apollo 600 respirator, this kit includes all necessary padding and suspension components for a secure and comfortable fit.
Features:
- Compatible with the Clemco Apollo 600 respirator.
- Includes top pad, suspension web, middle pad, side pad, and hook-fastener tape.
- Provides improved comfort and support for extended wear.
- Easy to install, replacing worn or damaged suspension components.
-
HLAPL23804The Clemco Apollo 600 Inlet Fitting (MPN: 23804) is a genuine replacement part designed for both high-pressure (HP) and low-pressure (LP) Apollo 600 respirator helmets. This inlet fitting ensures a secure connection for air supply and is easy to replace, making it essential for maintaining helmet performance and safety. Features:
- Compatibility: Suitable for Apollo 600 HP and LP models.
- Genuine Replacement: Manufactured by Clemco for reliable performance and a perfect fit.
- Easy Installation: Designed for quick and straightforward replacement.
HLAPL23804The Clemco Apollo 600 Inlet Fitting (MPN: 23804) is a genuine replacement part designed for both high-pressure (HP) and low-pressure (LP) Apollo 600 respirator helmets. This inlet fitting ensures a secure connection for air supply and is easy to replace, making it essential for maintaining helmet performance and safety. Features:- Compatibility: Suitable for Apollo 600 HP and LP models.
- Genuine Replacement: Manufactured by Clemco for reliable performance and a perfect fit.
- Easy Installation: Designed for quick and straightforward replacement.
-
HLAPL512
The Clemco Apollo 600 Web-Type Head Suspension (MPN: 23802) is a genuine replacement part designed for Apollo 600 HP and LP respirators. This non-DLX suspension web assembly includes a sweatband for operator comfort and is easy to install, ensuring a secure and reliable fit during abrasive blasting operations.
Features:
- Compatibility: Fits Apollo 600 High Pressure (HP) and Low Pressure (LP) helmets.
- Sweatband Included: Provides added comfort during extended use.
- Non-DLX Design: Standard web-type suspension. Genuine Replacement: Ensures reliable performance and compatibility.
- Easy Installation: Simple and quick to replace.
#30 on HP Parts Diagram & #24 on LP Parts Diagram
HLAPL512The Clemco Apollo 600 Web-Type Head Suspension (MPN: 23802) is a genuine replacement part designed for Apollo 600 HP and LP respirators. This non-DLX suspension web assembly includes a sweatband for operator comfort and is easy to install, ensuring a secure and reliable fit during abrasive blasting operations.
Features:
- Compatibility: Fits Apollo 600 High Pressure (HP) and Low Pressure (LP) helmets.
- Sweatband Included: Provides added comfort during extended use.
- Non-DLX Design: Standard web-type suspension. Genuine Replacement: Ensures reliable performance and compatibility.
- Easy Installation: Simple and quick to replace.
#30 on HP Parts Diagram & #24 on LP Parts Diagram
-
HLAPL4066
The Clemco Apollo 600 Window Frame Assembly (MPN: 24012) is a genuine replacement part designed to provide a secure seal against contaminants and air ingress, ensuring optimal safety during blasting operations. Easy to install, this assembly helps maintain the performance and integrity of your Apollo 600 helmet.
Features:
- Genuine Replacement: Designed specifically for the Clemco Apollo 600 helmet.
- Secure Seal: Protects against contaminants and air leaks for enhanced safety.
- Easy Installation: Quick and straightforward to replace.
HLAPL4066The Clemco Apollo 600 Window Frame Assembly (MPN: 24012) is a genuine replacement part designed to provide a secure seal against contaminants and air ingress, ensuring optimal safety during blasting operations. Easy to install, this assembly helps maintain the performance and integrity of your Apollo 600 helmet.
Features:
- Genuine Replacement: Designed specifically for the Clemco Apollo 600 helmet.
- Secure Seal: Protects against contaminants and air leaks for enhanced safety.
- Easy Installation: Quick and straightforward to replace.
-
HLAPL819
The Clemco Apollo 600 Window Gasket (MPN: 23819) is a genuine replacement part designed to maintain a secure seal for the window of the Apollo 600 respirator helmet. Easy to install, this gasket ensures optimal protection against contaminants during abrasive blasting.
Features:
- Genuine Part: Specifically designed for Clemco Apollo 600 helmets.
- Secure Seal: Prevents air leaks and contamination for enhanced safety.
- Easy Installation: Quick and straightforward to replace.
#11 in HP Parts Diagram & #6 in LP Parts Diagram
HLAPL819The Clemco Apollo 600 Window Gasket (MPN: 23819) is a genuine replacement part designed to maintain a secure seal for the window of the Apollo 600 respirator helmet. Easy to install, this gasket ensures optimal protection against contaminants during abrasive blasting.
Features:
- Genuine Part: Specifically designed for Clemco Apollo 600 helmets.
- Secure Seal: Prevents air leaks and contamination for enhanced safety.
- Easy Installation: Quick and straightforward to replace.
#11 in HP Parts Diagram & #6 in LP Parts Diagram
-
HLAPL24006The Clemco Apollo 600 Window Latch Kit (MPN: 24006) is a genuine replacement part designed to securely fasten the window on the Apollo 600 respirator helmet. Complete with base screws, this latch kit is easy to install, ensuring continued safety and performance during abrasive blasting operations. Features:
- Genuine Part: Designed specifically for the Clemco Apollo 600 helmet.
- Complete Kit: Includes base screws and nuts for a secure installation.
- Easy Replacement: Quick and straightforward to install.
HLAPL24006The Clemco Apollo 600 Window Latch Kit (MPN: 24006) is a genuine replacement part designed to securely fasten the window on the Apollo 600 respirator helmet. Complete with base screws, this latch kit is easy to install, ensuring continued safety and performance during abrasive blasting operations. Features:- Genuine Part: Designed specifically for the Clemco Apollo 600 helmet.
- Complete Kit: Includes base screws and nuts for a secure installation.
- Easy Replacement: Quick and straightforward to install.
-
HLAPL415
The Clemco Apollo Helmet Belt Assembly (MPN: 04430) is a genuine replacement part designed for Apollo 600, 60, and 20 respirator helmets. Compatible with both high-pressure (HP) and low-pressure (LP) models, this belt assembly ensures a secure and comfortable fit for operators during abrasive blasting operations.
Features:
- Compatibility: Suitable for Apollo 600, 60, and 20 helmets (HP and LP).
- Genuine Replacement: Manufactured by Clemco for reliable performance and durability.
- Secure Fit: Provides a stable and comfortable attachment point for respirator components.
- Easy Installation: Quick and straightforward to replace.
#2 on both HP & LP Parts Diagrams
HLAPL415The Clemco Apollo Helmet Belt Assembly (MPN: 04430) is a genuine replacement part designed for Apollo 600, 60, and 20 respirator helmets. Compatible with both high-pressure (HP) and low-pressure (LP) models, this belt assembly ensures a secure and comfortable fit for operators during abrasive blasting operations.
Features:
- Compatibility: Suitable for Apollo 600, 60, and 20 helmets (HP and LP).
- Genuine Replacement: Manufactured by Clemco for reliable performance and durability.
- Secure Fit: Provides a stable and comfortable attachment point for respirator components.
- Easy Installation: Quick and straightforward to replace.
#2 on both HP & LP Parts Diagrams
-
HLAPL22811The Clemco Apollo Helmet Breathing Tube Assembly (MPN: 22811) is a genuine replacement part designed for Clemco Apollo 20, 60, and 600 Breathing Air Respirators. This assembly includes two 7/8-inch O-rings (MPN: 22815) to ensure a secure and airtight connection. Easy to replace, this assembly restores proper airflow and safety during abrasive blasting. Features:
- Compatibility: Fits Apollo 20, 60, and 600 respirators.
- Complete Assembly: Includes two O-rings (MPN: 22815) for a secure seal.
- Genuine Replacement: Manufactured by Clemco for reliable performance.
- Easy Installation: Simple and quick to replace.
HLAPL22811The Clemco Apollo Helmet Breathing Tube Assembly (MPN: 22811) is a genuine replacement part designed for Clemco Apollo 20, 60, and 600 Breathing Air Respirators. This assembly includes two 7/8-inch O-rings (MPN: 22815) to ensure a secure and airtight connection. Easy to replace, this assembly restores proper airflow and safety during abrasive blasting. Features:- Compatibility: Fits Apollo 20, 60, and 600 respirators.
- Complete Assembly: Includes two O-rings (MPN: 22815) for a secure seal.
- Genuine Replacement: Manufactured by Clemco for reliable performance.
- Easy Installation: Simple and quick to replace.
-
HLCAT2001
The Clemco CCT Seal Kit (MPN: 08845) is a genuine replacement part designed for maintaining and restoring the performance of Clemco CCT systems. This kit includes multiple gaskets to ensure a secure and airtight seal, supporting optimal functionality during abrasive blasting operations.
Features:
- Compatibility: Designed specifically for Clemco CCT systems.
- Complete Kit: Includes multiple gaskets for comprehensive sealing.
- Genuine Replacement: Manufactured by Clemco for reliable performance.
- Easy Installation: Simple and quick to replace.
HLCAT2001The Clemco CCT Seal Kit (MPN: 08845) is a genuine replacement part designed for maintaining and restoring the performance of Clemco CCT systems. This kit includes multiple gaskets to ensure a secure and airtight seal, supporting optimal functionality during abrasive blasting operations.
Features:
- Compatibility: Designed specifically for Clemco CCT systems.
- Complete Kit: Includes multiple gaskets for comprehensive sealing.
- Genuine Replacement: Manufactured by Clemco for reliable performance.
- Easy Installation: Simple and quick to replace.
-
APAFC03557
The Clemco CPF Base / Mounting Bracket (MPN: 03557) is a versatile mounting solution designed for Clemco CPF-20 and CPF-80 filter systems. This genuine replacement part allows for freestanding floor use or secure wall mounting, providing flexibility and stability for your filtration setup.
Features:
- Compatibility: Suitable for Clemco CPF-20 and CPF-80 systems.
- Versatile Installation: Mounts to bottom lugs for floor use or side lugs for wall mounting.
- Genuine Replacement: Manufactured by Clemco for a perfect fit and durable performance.
- Sturdy Design: Ensures stability and proper support for filter systems.
APAFC03557The Clemco CPF Base / Mounting Bracket (MPN: 03557) is a versatile mounting solution designed for Clemco CPF-20 and CPF-80 filter systems. This genuine replacement part allows for freestanding floor use or secure wall mounting, providing flexibility and stability for your filtration setup.
Features:
- Compatibility: Suitable for Clemco CPF-20 and CPF-80 systems.
- Versatile Installation: Mounts to bottom lugs for floor use or side lugs for wall mounting.
- Genuine Replacement: Manufactured by Clemco for a perfect fit and durable performance.
- Sturdy Design: Ensures stability and proper support for filter systems.
-
APAFC1008The Clemco CPF-20 and CPF-80 Gasket and O-Ring Kit (MPN: 08942) is a genuine replacement part designed for use with Clemco CPF-20 and CPF-80 filter systems. This kit includes a gasket and O-ring to ensure a secure seal under the CPF filter cap, maintaining system efficiency and safety. Easy to install, it’s an essential part of routine maintenance. Features:
- Compatibility: Suitable for CPF-20 and CPF-80 filter systems.
- Complete Kit: Includes gasket and O-ring for secure sealing.
- Genuine Replacement: Manufactured by Clemco for reliable performance.
- Easy Installation: Simple and quick to replace.
APAFC1008The Clemco CPF-20 and CPF-80 Gasket and O-Ring Kit (MPN: 08942) is a genuine replacement part designed for use with Clemco CPF-20 and CPF-80 filter systems. This kit includes a gasket and O-ring to ensure a secure seal under the CPF filter cap, maintaining system efficiency and safety. Easy to install, it’s an essential part of routine maintenance. Features:- Compatibility: Suitable for CPF-20 and CPF-80 filter systems.
- Complete Kit: Includes gasket and O-ring for secure sealing.
- Genuine Replacement: Manufactured by Clemco for reliable performance.
- Easy Installation: Simple and quick to replace.