My Account
PPE & Respirators
Paint Respirators, Lenses & Parts
Face Masks & Filters
Disposable Coveralls
Painting / Gloves
Head Socks
Showing 16–30 of 66 results
-
From the makers of the Nova Respirators!- GVS Masks are made from TPE and are hypoallergenic and non-irritating.
- Extremely lightweight and comfortable.
- Each mask includes the initial set of filters installed and is ready-to-use.
- Price shown per-each. Packed 4 per case, with case discount.
- Multiple filter versions available as follows:
- OV / P100. Removes Organic Vapors along with P100 filtration. Painters choice!
- OV / AG / P100. Protects against organic, inorganic, chemical gases, and particulates.
- Solvents
- Chlorine and Chlorine Dioxide
- Hydrogen Chloride and Hydrogen Fluoride
- Sulphur Dioxide
- Organic Vapors
- Multi-Gas. Protects against organic, inorganic, chemical and ammonia based gasses. All acid gases above, plus:
- Ammonia
- Formaldehyde
- Hydrogen Sulfide
- Methylamine
- Multi-Gas / P100. Protects against organic, inorganic, chemical and ammonia based gases, and particulates.
- Keep your respirator fresh with the standard-profile line of GVS replacement filters.
- NIOSH Approved with ANSI Z87+ eye protection
- Goggles are scratch and fog resistant. Tear-off lenses available separately to keep them clean while spraying.
-
- #1 mask used by painters in USA
- Comfortable, lightweight and durable mask.
- Low Breathing resistance
- Filters available for gas and particulate protection.
- Genuine Parts - Manufactured by 3M Safety
-
HAB20TICHThe Bullard 20TIC Hood is specifically designed for use with hard hats, airline systems, or Powered Air Purifying Respirator (PAPR) blower assemblies. Crafted from Tychem QC for robust splash protection against a spectrum of chemical agents, this hood is ideal for applications in chemical/pesticide handling, spray painting/coating, and nuclear operations. Featuring a wide-angle lens for unparalleled visibility, a patented inflatable neck cuff for enhanced comfort and protection, and NIOSH certification, this durable yet economical hood meets the rigorous demands of industrial environments.
- Compatible with hard hats, PAPR, or Supplied Air Respiratory Systems
- Made from Tychem QC for superior chemical splash protection
- Wide-angle lens for industry-leading visibility
- Patented inflatable neck cuff design for comfort and airflow
- Reusable yet economical for varied application needs
- NIOSH certified for safety and reliability
HAB20TICHThe Bullard 20TIC Hood is specifically designed for use with hard hats, airline systems, or Powered Air Purifying Respirator (PAPR) blower assemblies. Crafted from Tychem QC for robust splash protection against a spectrum of chemical agents, this hood is ideal for applications in chemical/pesticide handling, spray painting/coating, and nuclear operations. Featuring a wide-angle lens for unparalleled visibility, a patented inflatable neck cuff for enhanced comfort and protection, and NIOSH certification, this durable yet economical hood meets the rigorous demands of industrial environments.- Compatible with hard hats, PAPR, or Supplied Air Respiratory Systems
- Made from Tychem QC for superior chemical splash protection
- Wide-angle lens for industry-leading visibility
- Patented inflatable neck cuff design for comfort and airflow
- Reusable yet economical for varied application needs
- NIOSH certified for safety and reliability
-
NK98886
- Tinted Full Face Lens Cover
- Protects the full face mask AND protects eyes from sunlight or other standard bright lights.
- (NOT for use for welding or other applications that require reduction of UV or IR radiation beyond the capability of normal sunglasses)
- Use with 3M 6000 Series Full Facepiece Respirators
- Pack of 25
- Genuine 3M product
NK98886- Tinted Full Face Lens Cover
- Protects the full face mask AND protects eyes from sunlight or other standard bright lights.
- (NOT for use for welding or other applications that require reduction of UV or IR radiation beyond the capability of normal sunglasses)
- Use with 3M 6000 Series Full Facepiece Respirators
- Pack of 25
- Genuine 3M product
-
Easy Tear-away protection for RPB Spray Hood Respirator lenses. Available options as follows:
- Single Tear-away lenses. These are the most economical versions for standard industrial coatings applications. These options comes in the following configurations:
- Full length for all T-Links and for T200's with full-length capes.
- Shorter version designed for the legacy T100 model, but which will work on all RPB spray hoods that do not have the optional in-helmet light.
- Cassette Lens system. These are premium versions, designed for maximum clarity and convenience. On time-critical spray projects, cassette lenses save valuable time by eliminating the need to stop and change lenses. These come 7 lenses per set, with 10 sets per pack as follows:
- Full length for all T-Links and for T200's with full-length capes.
- Shorter version for T200's with face seal or any version not using the optional in-helmet light.
- Single Tear-away lenses. These are the most economical versions for standard industrial coatings applications. These options comes in the following configurations:
-
HAT17110
- Bump Cap Assembly (17-110)
HAT17110- Bump Cap Assembly (17-110)
-
Climate control tubes / valves are essential for providing air flow to operators using supplied air respirators. The Bullard CCT's listed below work with all Bullard respirators, including GVX, 88vx, CC20, and more, and are equipped with Industrial Interchange (aka Hansen) fittings.
- F30 Constant Flow. Provides ambient air without cooling or flow adjustment.
- AC1000 Cool Tube: Cools incoming air by up to 30°.
- AC2400 Heat/Cool Tube: Both cools and heats incoming air by up to 30°.
- DC50 series DualCool®: When using the DC70 series cooling vest, the Dual Cool climate controller cools incoming air by up to 30° for both the respirator and the vest.
- Frigitron® 2000: For use with Free Air pump, cools air by up to 20°.
-
HAB20BTThis Bullard breathing air tube assembly is the HAB20BT (MPN: 20BT). This common replacement part connects the air supply line to the respirator. Additional details as follows:
- Compatibility: Bullard CC20, GR50, and RT models.
- Contains: Urethane breathing air tube and hood clamp
HAB20BTThis Bullard breathing air tube assembly is the HAB20BT (MPN: 20BT). This common replacement part connects the air supply line to the respirator. Additional details as follows:- Compatibility: Bullard CC20, GR50, and RT models.
- Contains: Urethane breathing air tube and hood clamp
Part Number Purchase Price HAB20BT $54.85 Bullard SAR Breathing Tube / Clamp for CC20, GR50, & RT Respirators
Part #HAB20BT
View Product DetailsWeb price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$54.85
-
-
HATZ16523
- Air Director (16-523)
HATZ16523- Air Director (16-523)
-
HANVZ16817
- Tear-off Lens (16-817)
- 7 layer cassette
- Pack of 10
HANVZ16817- Tear-off Lens (16-817)
- 7 layer cassette
- Pack of 10
Part Number Purchase Price HANVZ16817 $245.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$245.00
-
-
HANVZ16875
- Magnifying Lens Holder Assembly (16-875)
HANVZ16875- Magnifying Lens Holder Assembly (16-875)
Part Number Purchase Price HANVZ16875 $26.16 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$26.16
-
-
HAZ16616
- Pivot Assembly (16-616)
HAZ16616- Pivot Assembly (16-616)
-
HATZ16531
- Head Harness Assembly (16-531)
- Suitable for Z-Links
- Includes Head Harness Ratchet Assembly (16-530)
HATZ16531- Head Harness Assembly (16-531)
- Suitable for Z-Links
- Includes Head Harness Ratchet Assembly (16-530)
-
HATZ16525
- Head Harness Bracket and Air Director (16-525)
HATZ16525- Head Harness Bracket and Air Director (16-525)
-
HATZ16611
- Z-Link Visor (16-611)
HATZ16611- Z-Link Visor (16-611)
Our PPE Respirators are designed to provide maximum protection without compromising comfort. Choose from half-face respirators for lighter tasks or full-face respirators for complete face and respiratory protection during heavy-duty industrial work. All of our respirators are compatible with a wide range of filters and cartridges to protect against specific hazards such as organic vapors, chemical fumes, or fine dust particles. For added convenience, we also offer disposable respirators that are ideal for short-term projects or single-use applications. Ensure your team is equipped with the best respiratory protection available—if you need help selecting the right respirator or filter, our experts are here to assist.