Painting
Showing 136–150 of 284 results
-
-
HT340732
- General use paint sticks and stirrers
- Sold in packs of 1,000
HT340732- General use paint sticks and stirrers
- Sold in packs of 1,000
-
OPCSS10
- Comfortable elastic stretch fabric designed for Painters and Blasters
- Can be worn three ways (over nose, under nose, under chin)
- Close fitting design, ideal for wearing underneath a blast helmet or spray hood
- Helps keep the blast helmet more hygienic, by capturing body sweat
- Sold as a pack of 10 hoods
- Genuine Products - Manufactured by RPB Safety
OPCSS10- Comfortable elastic stretch fabric designed for Painters and Blasters
- Can be worn three ways (over nose, under nose, under chin)
- Close fitting design, ideal for wearing underneath a blast helmet or spray hood
- Helps keep the blast helmet more hygienic, by capturing body sweat
- Sold as a pack of 10 hoods
- Genuine Products - Manufactured by RPB Safety
-
SMT200995
- Suit TriTech T93R spray tips and guards
- Replacement seals ensure that the gun maintains good pressure and doesn't drip
- Sold in a pack of 5
- Genuine Product - Manufactured by TriTech USA
SMT200995- Suit TriTech T93R spray tips and guards
- Replacement seals ensure that the gun maintains good pressure and doesn't drip
- Sold in a pack of 5
- Genuine Product - Manufactured by TriTech USA
-
From the makers of the Nova Respirators!
- GVS Half Masks are made from TPE and are hypoallergenic and non-irritating.
- Extremely lightweight and comfortable.
- Each mask includes the initial set of filters installed and is ready-to-use.
- Price shown per-each. Packed 10 per case, with case discount
- Multiple filter versions available as follows:
- Standard P100. These filters will remove up to 99.97% of particulates and contaminants down to 0.3 microns.
- Standard P100 Starter Kit. Same as above along with a hard carry case and extra set of filters included.
- Enhanced P100 w/activated charcoal. Designed to remove nuisance odors along with P100 filtration.
- OV / P100. Removes Organic Vapors along with P100 filtration. Painters choice!
- Standard P100 Source Control. Designed for healthcare market and reduces cost and waste as compared to N95 disposable masks. Side exhaust valves removed.
- Reuse your respirator over and over again with the low-profile line of GVS replacement filters.
- NIOSH Approved TC-84A-8062.
NOTE - This is the low-profile series. Standard-profile Elipse Masks (which offers Acid Gas & Multi-Gas filter options) are also available.
As with all close-fitting respirators, these are designed to be used where fit-testing is conducted. The GVS Portacount Adapter is available to facilitate this testing.
-
From the makers of the Nova Respirators!
- GVS Masks are made from TPE and are hypoallergenic and non-irritating.
- Extremely lightweight and comfortable.
- Each mask includes the initial set of filters installed and is ready-to-use.
- Price shown per-each. Packed 5 per case, with case discount.
- Multiple filter versions available as follows:
- Standard P100
- Enhanced P100 w/Nuisance Odor control
- OV / P100 - P100 Organic Vapor protection. Painters favorite!
- Reuse your respirator by using the low-profile line of GVS replacement filters, which include a pre-filter option which extends the life of the OV / P100 filter.
- NIOSH Approved goggles provide ANSI Z87+ eye protection.
- Goggles are scratch and fog resistant. Tear-off lenses available separately to keep them clean while spraying
-
- #1 mask used by painters in USA
- Comfortable, lightweight and durable mask.
- Low Breathing resistance
- Filters available for gas and particulate protection.
- Genuine Parts - Manufactured by 3M Safety
-
- Durable silicone face seal provides flush, supple wearability and extends product life
- Cool Flow Valve allows for effortless breathing, heat reduction and moisture accumulation
- Standard and/or drop-down modes are made simple by adjustable dual-mode head harness
- Hard hat, weld/face shields are not a barrier with the 7585F fabric head cradle option
- NIOSH approved
-
From the makers of the Nova Respirators!
- GVS Half Masks are made from TPE and are hypoallergenic and non-irritating.
- Extremely lightweight and comfortable.
- Each mask includes the initial set of filters installed and is ready-to-use.
- Price shown per-each. Packed 8 per case, with case discount.
- Multiple filter versions available as follows:
- OV / P100. Removes Organic Vapors along with P100 filtration. Painters choice!
- OV / AG / P100. Protects against organic, inorganic, chemical gases, and particulates.
- Solvents
- Chlorine and Chlorine Dioxide
- Hydrogen Chloride and Hydrogen Fluoride
- Sulphur Dioxide
- Organic Vapors
- Multi-Gas. Protects against organic, inorganic, chemical and ammonia based gases. All acid gases above, plus:
- Ammonia
- Formaldehyde
- Hydrogen Sulfide
- Methylamine
- Multi-Gas / P100. Protects against organic, inorganic, chemical and ammonia based gases, and particulates.
- Reuse your respirator over and over again with the standard-profile line of GVS replacement filters.
- NIOSH Approved TC-84A-8062.
-
Replacement filter cartridges to suit GVS Elipse and Integra Standard-Profile half-masks.
- OV / AG / P100. Protects against organic, inorganic, chemical gases, and particulates.
- OV / P100. Protects against organic gases and particulates.
- Multi-Gas. Protects against organic, inorganic, chemical and ammonia based gases.
- Multi-Gas P100. Protects against organic, inorganic, chemical and ammonia based gases, and particulates.
-
Replacement filter cartridges to suit GVS Elipse and Integra Low-Profile half masks.
- Standard P100. These filters will remove up to 99.97% of particles and contaminants down to 0.3 microns.
- Enhanced P100 w/ activated charcoal. Designed to remove nuisance odors along with P100 filtration.
- OV / P100. Protects against organic vapors and particulates.
- Prefilters. Optional filters designed to extend the life of the OV filter. Requires filter holder kit as shown.
-
Sandpaper Rolls (SKU: P-SR) offer a high-quality, industrial-grade solution for effectively sanding painted surfaces.
- Industrial-grade quality ensuring durability and effectiveness.
- Optimized specifically for sanding painted surfaces.
- Multiple grit variations available:
- HTSPR040
- HTSPR060
- HTSPR080
- HTSPR100
- HTSPR120
- HTSPR180
-
GM24X069
- Used for the handling of high-viscosity coatings
- Prime alternative to troweling
- Ideal for touchup jobs and/or difficult-to-reach areas
- 5-gal dual post ram provides ample down force to load pump
- 290 cc Xtreme lower designed specifically for heavy viscosity material
- Tool-less wiper plate removal for easy maintenance
- Durable, rugged cart allows for single-person maneuverability
GM24X069- Used for the handling of high-viscosity coatings
- Prime alternative to troweling
- Ideal for touchup jobs and/or difficult-to-reach areas
- 5-gal dual post ram provides ample down force to load pump
- 290 cc Xtreme lower designed specifically for heavy viscosity material
- Tool-less wiper plate removal for easy maintenance
- Durable, rugged cart allows for single-person maneuverability
-
GMXPEONCOAT1
The Custom Graco XP Plural Spray System for EonCoat (SKU: GMXPEONCOAT1) is a modified Graco XP35 unit, designed specifically for EonCoat applications. This system maintains a 1:1 mix ratio and 3500 PSI delivery, with upgraded components, including the 290cc SST DuraFlo lower air motor, XL6500 Air Motor, stainless recirculation manifold, and PerformAA Automatic Air-Assisted gun.
Key Features:
- Custom-built for EonCoat applications, ensuring precise mixing and application performance.
- 1:1 mix ratio and 3500 PSI delivery for optimal coating application.
- Upgraded 290cc SST DuraFlo lower air motor for enhanced durability.
- XL6500 Air Motor for reliable, high-performance spraying.
- Stainless steel recirculation manifold for corrosion resistance and longevity.
- Includes the PerformAA Automatic Air-Assisted spray gun for consistent coating application.
For a remote mix manifold, the recommended version is the GR24W861, available here.
GMXPEONCOAT1The Custom Graco XP Plural Spray System for EonCoat (SKU: GMXPEONCOAT1) is a modified Graco XP35 unit, designed specifically for EonCoat applications. This system maintains a 1:1 mix ratio and 3500 PSI delivery, with upgraded components, including the 290cc SST DuraFlo lower air motor, XL6500 Air Motor, stainless recirculation manifold, and PerformAA Automatic Air-Assisted gun.
Key Features:
- Custom-built for EonCoat applications, ensuring precise mixing and application performance.
- 1:1 mix ratio and 3500 PSI delivery for optimal coating application.
- Upgraded 290cc SST DuraFlo lower air motor for enhanced durability.
- XL6500 Air Motor for reliable, high-performance spraying.
- Stainless steel recirculation manifold for corrosion resistance and longevity.
- Includes the PerformAA Automatic Air-Assisted spray gun for consistent coating application.
For a remote mix manifold, the recommended version is the GR24W861, available here.
-
The Graco® XP70 Plural Component Sprayer is a high-performance 2:1 fixed ratio sprayer designed for efficient two-component coating applications. Featuring Graco’s King and Xtreme airless spray technology, it minimizes waste, improves material consistency, and reduces clean-up time. The system is cart-mounted for mobility, includes 115/58 cc lowers with built-in filters, dual paint feed hoppers, material hoses, and the XTR-7 spray gun.
Key Features:
- 2:1 fixed ratio with 115/58 cc lowers, ensuring precise material mixing.
- Graco King & Xtreme airless spray technology for superior coating application.
- Built-in filters in lowers to maintain clean, smooth spray performance.
- NXT 6500 Air Motor for reliable and consistent operation.
- Cart-mounted design for easy maneuvering on job sites.
- Dual paint feed hoppers allow continuous painting without stopping to refill.
- Includes material hoses and XTR-7 spray gun for a complete spraying solution.
In addition to top-tier painting tools, we offer a variety of accessories to ensure your project runs smoothly from start to finish. Our paint sprayers are designed for fast, even coverage on large surfaces, while our rollers, brushes, and extension poles provide precision for detailed work. For surface preparation, we offer sandpaper, scrapers, and pressure washers to ensure a clean base before applying paint. Don’t forget to check out our range of protective gear, including respirators, coveralls, and goggles, to keep your team safe from fumes and overspray. If you’re unsure which products are best suited for your project, our expert team is here to help guide you.