My Account
Airless Spray Systems
Accessories for Airless Systems
Airless Gun Tips
Airless Hoses & Related
Airless Spray Guns & Accessories
Internal Pipe Coating Systems
Parts & Fittings Airless Spray Equipment
Plural Equipment
Repair Parts for Airless Guns
Single Component Equipment
Showing 76–90 of 99 results
-
GRXHD010- Suits Graco XHD Airless Spray Tips and Guards
- XHD Heavy Duty OneSeal Seat and Seal Kit
- Seals spray tip to minimize leaks and maintain optimal tip pressure
- Sold as a pack of 5 seals
- Genuine Parts - Manufactured by Graco
GRXHD010- Suits Graco XHD Airless Spray Tips and Guards
- XHD Heavy Duty OneSeal Seat and Seal Kit
- Seals spray tip to minimize leaks and maintain optimal tip pressure
- Sold as a pack of 5 seals
- Genuine Parts - Manufactured by Graco
-
GR155541
- Suited for Airless Paint lines and equipment
- Rated to 7,250psi
- High Pressure Steel Plated Elbow
- Female NPT Swivel 1/4"
- Male NPT Threaded End 1/4"
- Sold Individually
GR155541- Suited for Airless Paint lines and equipment
- Rated to 7,250psi
- High Pressure Steel Plated Elbow
- Female NPT Swivel 1/4"
- Male NPT Threaded End 1/4"
- Sold Individually
-
GR145541
- Suited for Airless Paint lines and equipment
- Rated to 7,250psi
- High Pressure Steel Plated Elbow
- Female NPT Swivel 1/8"
- Male NPT Threaded End 1/8"
- Sold Individually
GR145541- Suited for Airless Paint lines and equipment
- Rated to 7,250psi
- High Pressure Steel Plated Elbow
- Female NPT Swivel 1/8"
- Male NPT Threaded End 1/8"
- Sold Individually
-
GR189018Used between the spray hose and the spray gun, this swivel connection eases movement between them.
- Can be used with Graco High Pressure Airless Sprayer Paint Hose and Gun - has a 7500 PSI pressure rating
- 1/4" Male x 1/4" Female
- Teflon packed for long life, compatible with solvent
- Sold Individually
- Genuine Parts - Manufactured by Graco
GR189018Used between the spray hose and the spray gun, this swivel connection eases movement between them.- Can be used with Graco High Pressure Airless Sprayer Paint Hose and Gun - has a 7500 PSI pressure rating
- 1/4" Male x 1/4" Female
- Teflon packed for long life, compatible with solvent
- Sold Individually
- Genuine Parts - Manufactured by Graco
-
GR25D515
- Suits Graco King Xtreme and Maxlife Lowers
- Connects to the bottom of the lower to siphon coatings out of a 5 gallon pail
- Kit includes Large elbow from the bottom of the pump, 6' x 1" suction hose, bent pick-up tube and all the connectors to make it happen
- Sold as a kit
- Genuine Parts - Manufactured by Graco
GR25D515- Suits Graco King Xtreme and Maxlife Lowers
- Connects to the bottom of the lower to siphon coatings out of a 5 gallon pail
- Kit includes Large elbow from the bottom of the pump, 6' x 1" suction hose, bent pick-up tube and all the connectors to make it happen
- Sold as a kit
- Genuine Parts - Manufactured by Graco
-
GR186075
- Suits 6" Filter for Extreme Lower
- Is used inside the lower to ensure the filter mesh doesn't collapse under suction or pressure
- Support for Long Filters
- Sold Individually
- Genuine Parts - Manufactured by Graco
GR186075- Suits 6" Filter for Extreme Lower
- Is used inside the lower to ensure the filter mesh doesn't collapse under suction or pressure
- Support for Long Filters
- Sold Individually
- Genuine Parts - Manufactured by Graco
-
GR248213
- Suits Graco Ultra Max II Pump Lower
- Repair Kit for lower to extend life
- Complete rebuild kit including
- Stainless Steel Balls
- Packings
- Orings
- Leather V-Packings
- and more
- Genuine Parts - Manufactured by Graco
GR248213- Suits Graco Ultra Max II Pump Lower
- Repair Kit for lower to extend life
- Complete rebuild kit including
- Stainless Steel Balls
- Packings
- Orings
- Leather V-Packings
- and more
- Genuine Parts - Manufactured by Graco
-
GR244841
- Suits Graco King, Xtreme and most Airless Spray Pumps
- Designed to be mounted on an Airless Sprayer between the incoming air and the air regulator
- Lubricates the incoming air to extend the life of the air motor
- Sold as a Kit which includes;
- The Lubricator
- Adaptor Pieces to match the air regulator
- Pins, O-Ring and Elbow fitting
- Genuine Parts - Manufactured by Graco
GR244841- Suits Graco King, Xtreme and most Airless Spray Pumps
- Designed to be mounted on an Airless Sprayer between the incoming air and the air regulator
- Lubricates the incoming air to extend the life of the air motor
- Sold as a Kit which includes;
- The Lubricator
- Adaptor Pieces to match the air regulator
- Pins, O-Ring and Elbow fitting
- Genuine Parts - Manufactured by Graco
-
GR245145
- Suits all Xtreme and Maxlife lowers
- Dump or Bleed Valve Repair Kit
- Valve is mounted on the side of the lower to allow pressure relief from the filter housing
- Kit includes all the replacement parts for the Valve, O-Rings, Gasket, Valve Seat, Carbide Ball and Retaining Ring
- Sold as a Kit
- Genuine Parts - Manufactured by Graco
GR245145- Suits all Xtreme and Maxlife lowers
- Dump or Bleed Valve Repair Kit
- Valve is mounted on the side of the lower to allow pressure relief from the filter housing
- Kit includes all the replacement parts for the Valve, O-Rings, Gasket, Valve Seat, Carbide Ball and Retaining Ring
- Sold as a Kit
- Genuine Parts - Manufactured by Graco
-
GR155535
- High-Pressure Elbow Fitting
- 1/4" NPTFSW X 1/8" NPTM
- Steel-plated spray machine accessory
GR155535- High-Pressure Elbow Fitting
- 1/4" NPTFSW X 1/8" NPTM
- Steel-plated spray machine accessory
-
One-way ball valves are used in industrial airless spray pumps. Replacement ball valves are available in various sizes and thread types, from both OEM and aftermarket manufacturers.
- Mount on the high-pressure filter outlets for the control of individual spray lines
- Can be used as a priming-drain valve
- The ½" version has premium PEEK Seals which can provide more than double the life of Teflon
Other sizes/versions available. Enquire if you don't see your required version.
-
GR262478
- 3/8" NPTM holds 1/2" 12 element stick
- 7,250 psi rated
- Component of XM/XP Mix Manifold Kit
- Connects to static mixer adapter on the integration hose
- Mixer not included
- Genuine Graco part
GR262478- 3/8" NPTM holds 1/2" 12 element stick
- 7,250 psi rated
- Component of XM/XP Mix Manifold Kit
- Connects to static mixer adapter on the integration hose
- Mixer not included
- Genuine Graco part
-
GR224453
- Can be used in tip filter housing, swivel spray nozzle or inline filter
- 0.005''
- #100 mesh
- Sold in packs of 5
- Genuine Graco part
GR224453- Can be used in tip filter housing, swivel spray nozzle or inline filter
- 0.005''
- #100 mesh
- Sold in packs of 5
- Genuine Graco part
-
GR243281
- Suits RAC 5 or RAC V Spray Tip
- Used to Seal between the Spray Gun and the Tip Orifice
- 4050psi Rated
- Sold as a pack of 5
- Genuine Parts - Manufactured by Graco
GR243281- Suits RAC 5 or RAC V Spray Tip
- Used to Seal between the Spray Gun and the Tip Orifice
- 4050psi Rated
- Sold as a pack of 5
- Genuine Parts - Manufactured by Graco
-
GR288488
- Suits Contractor II and FTX Spray Guns
- Complete Repair Kit
- Sold as a Kit
- Genuine Parts - Manufactured by Graco
GR288488- Suits Contractor II and FTX Spray Guns
- Complete Repair Kit
- Sold as a Kit
- Genuine Parts - Manufactured by Graco
