My Account
Pinhole & Holiday Testing
Adhesion Testing
Air Leak Testing
Calibration
Coating Thickness
Concrete Moisture
Environmental Conditions
Gloss Measurements
Hardness Testing
Inspection Accessories
Inspection Kits
Oven Profile
Surface Contamination
Surface Profile
Verification Standards
Wall Thickness
Showing 16–24 of 24 results
-
BlastOne offers all instruments and accessories from the DeFelsko product line. These rolling springs are the electrodes suited for DeFelsko® high voltage holiday detection on steel pipes, and additional information is as follows:- Multiple sizes available, 4-36"
- Each electrode includes two pre-installed spring couplers. Replacement couplers are available in packs of 2.
- Requires one Spring Connector to connect either DeFelsko or SPY spring electrodes to PosiTest HHD (sold separately).
- Sold Individually
-
- Rods: choose between 5" (13cm) and 20" (50cm)
- Replacement electrode rod thumb screws - sold in packs of 3
- Manufacturer part #'s:
- HHDEXTRODS
- HHDEXTRODL
- HHDTHMBSCR
- Made in the USA
-
Reduce the investment required to convert to PosiTest® HHD equipment by using these adaptors. Makes other brands of brush and spring electrodes compatible with DeFelsko High Voltage Holiday Detectors. (Adaptor not required for SPY electrodes)
- Three adaptors available with MPN's shown, as follows:
- HHDPCWIADPT - PCWI Adaptor
- HHDTRADPT - Tinker & Rasor Adaptor
- HHD266ADPT - 266 and 280 Adaptor
- Three adaptors available with MPN's shown, as follows:
-
The DeFelsko High Voltage Holiday detector is widely used for inspections of thicker coatings. The unit comes with a 25' ground cable but longer lengths of up to 300' are available for convenience on larger project sites.
- Multiple lengths available: 25, 50, 100, and 300'
- Compatible with the PosiTest® HHD series High Voltage Holiday detector from DeFelsko
-
INDHHDFANBRSHBlastOne offers all replacement parts for DeFelsko industrial testing equipment on-line for easy ordering, access to instructional material, etc. This 6" stainless steel fan brush for the PosiTest HHD series is compatible with the original HHD and the HHD C units, and come standard with each new unit. It is available as a replacement part here. MPN: HHDFANBRSHINDHHDFANBRSHBlastOne offers all replacement parts for DeFelsko industrial testing equipment on-line for easy ordering, access to instructional material, etc. This 6" stainless steel fan brush for the PosiTest HHD series is compatible with the original HHD and the HHD C units, and come standard with each new unit. It is available as a replacement part here. MPN: HHDFANBRSH
Part Number Purchase Price INDHHDFANBRSH $30.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$30.00
-
-
INDHHDCOUPLER
- For use with the PosiTest HHD
- Attaches to the Spring Connector via thread onto rolling springs
- Manufacturer part# HHDCOUPLER
- Made in the USA
INDHHDCOUPLER- For use with the PosiTest HHD
- Attaches to the Spring Connector via thread onto rolling springs
- Manufacturer part# HHDCOUPLER
- Made in the USA
Part Number Purchase Price INDHHDCOUPLER $85.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$85.00
-
-
INDHHDWAND
- 1.5m insulated cable, coverts the PosiTest® HHD to a wand-type instrument
- Not for voltages >15kV
INDHHDWAND- 1.5m insulated cable, coverts the PosiTest® HHD to a wand-type instrument
- Not for voltages >15kV
Part Number Purchase Price INDHHDWAND $255.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$255.00
-
-
BlastOne offers all instruments and accessories from the DeFelsko range on-line, for easy access to ordering, operational manuals, etc. These flat wire brushes are the electrodes suited for PosiTest HHD high voltage holiday detection on flat surfaces. Additional information is as follows:
- Multiple sizes available between 2 - 48" wide (51 to 1219 mm)
- Flat wire brushes do not require couplers or spring connectors like the rolling spring electrodes do. Each brush is supplied ready-to-use.
- Sold individually.
-
INDHHDCONNECT
- Suits PosiTest HHD High Voltage Holiday Detector
- Used to connect DeFelsko or SPY rolling spring electrodes to the PosiTest HHD
- Sold Individually
INDHHDCONNECT- Suits PosiTest HHD High Voltage Holiday Detector
- Used to connect DeFelsko or SPY rolling spring electrodes to the PosiTest HHD
- Sold Individually
Part Number Purchase Price INDHHDCONNECT $100.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$100.00
-
Ensure the integrity of your coatings with DeFelsko® PosiTest® Pinhole and Holiday Detectors. Our advanced detection solutions are designed to identify holidays, pinholes, leaks, and other discontinuities in both low and high voltage applications. Featuring versatile configurations, including handheld wands and stick-type kits, these detectors provide accurate and reliable results for coatings on metal and concrete substrates.
With a range of accessories like electrodes, extension rods, and calibration verifiers, our detectors are ideal for maintaining high-quality standards in industrial coating applications.
