My Account
Inspection
Adhesion Testing
Air Leak Testing
Calibration
Coating Thickness
Concrete Moisture
Environmental Conditions
Gloss Measurements
Hardness Testing
Inspection Accessories
Inspection Kits
Oven Profile
Pinhole & Holiday Testing
Surface Contamination
Surface Profile
Verification Standards
Wall Thickness
Showing 16–30 of 155 results
-
BlastOne offers all accessories and replacement parts for DeFelsko testing instruments. The PosiTector CMM IS concrete moisture meter platform is expandable, and larger concrete areas can be tested simultaneously in accord with ASTM F2170 standards by increasing the number of in-situ probes. CMM IS Expansion Packs (additional probes) are available singly or in packs of 4 or 16 and each probe includes the following accessories:- Calibration Check chamber
- Saturated salt solution
- Cap / cover
- 2 stackable probe extensions
- Battery
-
The Bresle method of testing surfaces for salt contamination is recognized by ISO and ASTM standards. The DeFelsko SST test probe is an easy and accurate way to conduct these tests. Test patches are required to perform them and DeFelsko has multiple options, as follows:- PosiPatch™. This innovative product utilizes a reusable patch, held by a magnetic ring against the surface. Available in 2 configurations:
- Rigid ring. Preferred for flat surfaces or round surfaces with greater than 40 inch diameter.
- Flexible ring. Preferred for round surfaces between 4 and 40 inch OD, or a minimum of 4.5 inches ID.
- Saves time and money vs. disposable patches.
- Utilizes a plastic needle - no sharp hypodermic needles required!
- Latex Disposable. The conventional Latex Adhesive Bresle Method Patch has a sample test volume range of up to 15 ml (the only DeFelsko version with this range) for applications where the spec requires this.
- Latex-Free Disposable. Similar to latex disposables but lower in cost, the DeFelsko Adhesive Bresle Method Patch is suitable when the 15 ml sample size of the latex version is not required.
- PosiPatch™. This innovative product utilizes a reusable patch, held by a magnetic ring against the surface. Available in 2 configurations:
-
INDRTRTAPEHLDERRecommended best practice when using the PosiTector RTR 3D is to use these specialized Replica Tape Holders. Very easy to use - just affix the replica tape to the holder, and ensure that the compressible foam is located over the hole in the holder. Once adhered, the replica tape can be simply placed into the probe with no concern about migration of the adhesive onto the probe sensors.INDRTRTAPEHLDERRecommended best practice when using the PosiTector RTR 3D is to use these specialized Replica Tape Holders. Very easy to use - just affix the replica tape to the holder, and ensure that the compressible foam is located over the hole in the holder. Once adhered, the replica tape can be simply placed into the probe with no concern about migration of the adhesive onto the probe sensors.
Part Number Purchase Price INDRTRTAPEHLDER $10.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$10.00
-
-
The DeFelsko PosiTest® PC – Powder Thickness Gage (SKU: P-INDPCKIT) provides fast, non-destructive thickness predictions for uncured powder coatings. With improved accuracy, durability, and simple operation, this versatile tool is available as a standalone unit or in comprehensive inspection kits.
Key Features:
- Accurate, non-destructive thickness prediction for uncured powder coatings
- Stores up to 999 readings with on-screen averaging
- Durable design resistant to solvents, acids, oils, water, and dust
- Improved sensor for odd geometries, small tubes, and moving parts
- ASTM D7378 compliant
-
The PosiTector RTR family of instruments is DeFelsko's state-of-the-art solution for surface profile measurement and more. Two different probe models are available and selected features are listed below:
- Familiar. Based on the award-winning PosiTector instrument body platform, the RTR probes are easy to master and use.
- Capable. State-of-the-art technology with 2 models as follows:
- PosiTector RTR H. This 2D version measures surface profile using Testex tape just like a spring micrometer, but with the following enhancements:
- Automatically compensates for the thickness of the Testex film backing.
- Using conventional Testex Coarse or X-Coarse tape, the RTR H calculates linearized measurements automatically, without the complicated averaging process required by analog spring micrometers.
- Stores readings which can be uploaded to PosiSoft, Mac, and smartphone software for professional reporting. Of course, you can keep the physical replica tape as well.
- Ready-to-measure. No calibration adjustment required for most applications.
- PosiTector RTR 3D. This 2D / 3D version offers the same features as the RTR H above, but with these extra features:
- Creates a 3D image of the profile and calculates Peak Density, Peak Count and more - a total of 14 common 2D and 3D surface parameters.
- When paired with the Advanced body, the RTR 3D can download high-res .SDF files for further analysis.
- These 3D surface parameters are proving to be as important (if not more so) than traditional surface profile measurements for predicting coating life. Future proof your instrument purchase against changing specifications by investing in the highly capable PosiTector RTR 3D!
- Note: The PosiTector RTR 3D requires Optical grade Testex tape.
- PosiTector RTR H. This 2D version measures surface profile using Testex tape just like a spring micrometer, but with the following enhancements:
- Configurable. Your choice of RTR probe is available separately (for use with existing PosiTector gage / body), or can be purchased as a kit with your choice of Standard or Advanced body.
-
INDAIRQuickly and easily detect air and water leaks in bulding envelopes and rigid air barrier systems. Ideal for testing penetrations (fasteners, masonry ties, etc.) and continuity of joints and seams in rigid air barrier systems. DeFelsko MPN: AIRINDAIRQuickly and easily detect air and water leaks in bulding envelopes and rigid air barrier systems. Ideal for testing penetrations (fasteners, masonry ties, etc.) and continuity of joints and seams in rigid air barrier systems. DeFelsko MPN: AIR
-
INDCMMThe PosiTest CMM - DeFelsko's solution for accurate comparative concrete moisture measurements. Simple and powerful, it offers a convenient way to conform to ASTM F2659. Selected features as follows:
- Simple Design. Simply placing the DeFelsko CMM directly on a clean, concrete floor gives a quick moisture measurement. It is a non-destructive test and doesn't require holes to be drilled in the concrete slab or screed.
- Fast. The CMM gives instant readings.
- Robust. Sturdy IP65 construction offers weatherproof, dust proof, and water resistance. Shock resistant too!
- Easy to use. For large areas, the optional DeFelsko Telescopic Extender eliminates the need for kneeling to perform the tests.
- Capable. Tests concrete moisture to depths of ¾ or 1 inch. Integrates with PosiSoft software via USB cable for reporting.
INDCMMThe PosiTest CMM - DeFelsko's solution for accurate comparative concrete moisture measurements. Simple and powerful, it offers a convenient way to conform to ASTM F2659. Selected features as follows:- Simple Design. Simply placing the DeFelsko CMM directly on a clean, concrete floor gives a quick moisture measurement. It is a non-destructive test and doesn't require holes to be drilled in the concrete slab or screed.
- Fast. The CMM gives instant readings.
- Robust. Sturdy IP65 construction offers weatherproof, dust proof, and water resistance. Shock resistant too!
- Easy to use. For large areas, the optional DeFelsko Telescopic Extender eliminates the need for kneeling to perform the tests.
- Capable. Tests concrete moisture to depths of ¾ or 1 inch. Integrates with PosiSoft software via USB cable for reporting.
-
INDHHDHCBRSH5BlastOne offers all instruments and accessories from the DeFelsko range on-line, for easy ordering, access to operational manuals, and more. This half-circle electrode for the PosiTest HHD is the latest innovation from DeFelsko, offering easier use on small pipes with flanges and other protrusions. MPN: HHDHCBRSH5INDHHDHCBRSH5BlastOne offers all instruments and accessories from the DeFelsko range on-line, for easy ordering, access to operational manuals, and more. This half-circle electrode for the PosiTest HHD is the latest innovation from DeFelsko, offering easier use on small pipes with flanges and other protrusions. MPN: HHDHCBRSH5
Part Number Purchase Price INDHHDHCBRSH5 $195.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$195.00
-
-
The DeFelsko PosiTest® PC – Powder Thickness Gage (SKU: P-INDPCKIT) provides fast, non-destructive thickness predictions for uncured powder coatings. With improved accuracy, durability, and simple operation, this versatile tool is available as a standalone unit or in comprehensive inspection kits.
Key Features:
- Accurate, non-destructive thickness prediction for uncured powder coatings
- Stores up to 999 readings with on-screen averaging
- Durable design resistant to solvents, acids, oils, water, and dust
- Improved sensor for odd geometries, small tubes, and moving parts
- ASTM D7378 compliant
-
INDPCUSBFIXTBlastOne offers all DeFelsko instruments, accessories, and replacement parts online for easy ordering, resource lookup and more. These retention fixtures for the PosiTest PC are intended to facilitate proper positioning of the USB cable when loading PC Powder Measurements live into PosiSoft software. MPN: PCUSBFIXTINDPCUSBFIXTBlastOne offers all DeFelsko instruments, accessories, and replacement parts online for easy ordering, resource lookup and more. These retention fixtures for the PosiTest PC are intended to facilitate proper positioning of the USB cable when loading PC Powder Measurements live into PosiSoft software. MPN: PCUSBFIXT
Part Number Purchase Price INDPCUSBFIXT $85.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$85.00
-
-
INDSSTCUPBlastOne offers all accessories and replacement parts for DeFelsko testing instruments. As part of the PosiTector SST test process, deionized water is measured before injecting under the patch. These 30 ml Graduated Cups offer a convenient way to measure the water and are available in packs of 10. MPN: SSTCUPINDSSTCUPBlastOne offers all accessories and replacement parts for DeFelsko testing instruments. As part of the PosiTector SST test process, deionized water is measured before injecting under the patch. These 30 ml Graduated Cups offer a convenient way to measure the water and are available in packs of 10. MPN: SSTCUP
-
INDBHIGLASSThe glass zero plate for the PosiTector BHI Barcol Hardness Impressor is used when replacing the indentor, adjusting for wear, etc. A glass plate is included in the BHI kit, and is available separately here as a replacement item. MPN: BHIGLASSINDBHIGLASSThe glass zero plate for the PosiTector BHI Barcol Hardness Impressor is used when replacing the indentor, adjusting for wear, etc. A glass plate is included in the BHI kit, and is available separately here as a replacement item. MPN: BHIGLASS
Part Number Purchase Price INDBHIGLASS $10.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$10.00
-
-
INDPAPERBTBlastOne offers all instruments and accessories from the DeFelsko range on-line, for easy ordering, access to operational manuals, and more. This thermal printer paper is compatible with the DeFelsko Bluetooth printer and is packed in convenient boxes of 10 rolls. MPN: PAPERBTINDPAPERBTBlastOne offers all instruments and accessories from the DeFelsko range on-line, for easy ordering, access to operational manuals, and more. This thermal printer paper is compatible with the DeFelsko Bluetooth printer and is packed in convenient boxes of 10 rolls. MPN: PAPERBT
Part Number Purchase Price INDPAPERBT $20.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$20.00
-
-
Burnishing tools facilitate accurate and easy use of Testex Press-O-Film replica tape. Multiple types available, as follows:
- Stick-type. Economical plastic, sold in packs of 10, these have 8mm round ends. Use with all types of Testex tape.
- Burnishing ball. Designed to use with optical grade tape, for use with the RTR 3D probe.
- High Accuracy tool. Updated with a spring-loaded ball for the most consistent results. Use with standard Testex tape.
-
INDRTRCLEANRecommended best practice when performing replica tape tests with PosiTector RTR instruments is to thoroughly clean the anvils (test surfaces) before performing the test. These Cleaning Cards are premoistened with alcohol and are excellent for removing bits of adhesive and debris from the anvils. Each new RTR comes complete with 5 cleaning cards and additional quantities are available here as needed, in packs of 20.INDRTRCLEANRecommended best practice when performing replica tape tests with PosiTector RTR instruments is to thoroughly clean the anvils (test surfaces) before performing the test. These Cleaning Cards are premoistened with alcohol and are excellent for removing bits of adhesive and debris from the anvils. Each new RTR comes complete with 5 cleaning cards and additional quantities are available here as needed, in packs of 20.
Part Number Purchase Price INDRTRCLEAN $25.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$25.00
-
