My Account
General Repair Parts for Blast Pots
Abrasive Metering Valves & Parts
Air Control Valves & Related
Deadman / Control Systems
Internal Pipe (ID) System Components
MistBlaster Specific Parts
Sponge Blast Equipment Parts
Vacuum Blaster Workheads, Parts & Related
VertiDrive Specific Parts
Showing 31–45 of 140 results
-
BlastOne offers a full selection of industrial fittings. This group is the Hose Barb x Female Pipe Swivel (Ball Seat), or aka “Nut & Tail”. Other information is as follows:- Hose Barb (aka Hose tail) x NPSM FPX Female Swivel
- aka “Nut and Tail”
- First dimension is hose ID for hose barb
- Use with crimp ferrules or worm gear clamps
- Applications: Low Pressure SAE general service air, water, and hydraulic hose
- Operating Pressure Range: 250 PSI maximum at 72F
- Operating Temperature Range: -40 to 160F at 150 PSI max
-
BlastOne offers a full selection of industrial fittings. This group is the brass hose menders. Other information is as follows:
- Push-on Hose Barb (aka Hose tail) ends
- Yellow plastic caps
- Not intended for use with crimp ferrules or worm clamps
- Applications: Compatible with air, most fluids, and low-pressure hydraulic hoses that are push-lock type
- Operating Pressure Range: 350 PSI maximum
-
The Air Pressure Gage is a crucial tool for monitoring air pressure in your blast equipment, ensuring optimal performance and safety. This general-purpose gage is sold individually and designed not to exceed the manufacturer's recommendation. Secure your blasting operations with this reliable Air Pressure Gage for precise and consistent air pressure tracking.
- General purpose air pressure gages for monitoring of air pressure
- Do not exceed manufacturers recommendation for blast equipment
- Sold Individually
-
Part Number Purchase Price BA700751902 $265.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$265.00
-
-
AFREG06G
- Used for reduced-pressure blasting of delicate surfaces such as car panels, stone facades, etc.
- Not recommended for normal production blasting due to inherent flow restrictions. Regulator should be disconnected or by-passed for full pressure blasting
AFREG06G- Used for reduced-pressure blasting of delicate surfaces such as car panels, stone facades, etc.
- Not recommended for normal production blasting due to inherent flow restrictions. Regulator should be disconnected or by-passed for full pressure blasting
-
BA50785K273High-pressure brass pipe fitting for use with:
- NPT female threads: Air, Water, BSP and metric threads: air, natural gas, oil, water
BA50785K273High-pressure brass pipe fitting for use with:- NPT female threads: Air, Water, BSP and metric threads: air, natural gas, oil, water
Part Number Purchase Price BA50785K273 $16.85 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$16.85
-
-
BlastOne offers a full selection of industrial fittings. This group is the Female Swivel x Push-Lock Hose Barb, Ball Seat. Other information is as follows:
- Push-on Hose Barb (aka Hose tail) x NPSM FPX Female Swivel
- Yellow plastic cap
- Not intended for use with crimp ferrules or worm clamps
- Applications: Compatible with air, most fluids, and low-pressure hydraulic hoses that are push-lock type
- Operating Pressure Range: 350 PSI maximum
-
FPSP25
- FPSP25, RB-2 Replacement 1" Threaded Plug
- For IPC1000 RotorBlast
- (Replaces part number IPC1001)
- Note: 4 of these are included in Spare Parts Kit, IPC1099
FPSP25- FPSP25, RB-2 Replacement 1" Threaded Plug
- For IPC1000 RotorBlast
- (Replaces part number IPC1001)
- Note: 4 of these are included in Spare Parts Kit, IPC1099
-
DMMEM200
- Pop-top design, self cleaning
- Installs upright
- 1" (25mm) male thread connection
DMMEM200- Pop-top design, self cleaning
- Installs upright
- 1" (25mm) male thread connection
-
BA02013BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement O-ring set for 1" abrasive trap (factory part number 02013).BA02013BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement O-ring set for 1" abrasive trap (factory part number 02013).
-
BA01992BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement 3/16" O-Ring for the 1" inlet valve (factory part number 01992).BA01992BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement 3/16" O-Ring for the 1" inlet valve (factory part number 01992).
-
DMPYT400
- Piston-operated valve
- 1/4" female NPT supply air connection
- Effortless activation via deadman control handle
- Guide tubes ensure consistent plunger travel
- Eliminate repressurization down time profit loss
DMPYT400- Piston-operated valve
- 1/4" female NPT supply air connection
- Effortless activation via deadman control handle
- Guide tubes ensure consistent plunger travel
- Eliminate repressurization down time profit loss
-
BA7046003
- Suits Schmidt 3.5 Blast Pot and MistBlaster Secondary Wheel
- 10" Wheel & Tire
- Never Flat, rubber filled tires
- Makes for easy portability onsite
- Sold Individually
- Genuine Parts - Manufactured by Axxiom Manufacturing/Schmidt
BA7046003- Suits Schmidt 3.5 Blast Pot and MistBlaster Secondary Wheel
- 10" Wheel & Tire
- Never Flat, rubber filled tires
- Makes for easy portability onsite
- Sold Individually
- Genuine Parts - Manufactured by Axxiom Manufacturing/Schmidt
-
AFPRGUC200RE
- Suits MistBlaster Blast Machine
- Used to measure the pressure of the blasting and in-coming air
- U-Clamp Panel Mount Gauge
- 2.5" Diameter
- Will measure up to 200 PSI - do not exceed manufacturers recommendation for blast equipment
- Liquid Filled gauge gives you a more steady reading
- Rear Entry gauge
- Sold Individually
AFPRGUC200RE- Suits MistBlaster Blast Machine
- Used to measure the pressure of the blasting and in-coming air
- U-Clamp Panel Mount Gauge
- 2.5" Diameter
- Will measure up to 200 PSI - do not exceed manufacturers recommendation for blast equipment
- Liquid Filled gauge gives you a more steady reading
- Rear Entry gauge
- Sold Individually
Part Number Purchase Price AFPRGUC200RE $72.94 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$72.94
-
-
BA01989BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement bottom cap seal for the inlet valve (factory part number 01989).BA01989BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement bottom cap seal for the inlet valve (factory part number 01989).
Keep your blast pots in top condition with our comprehensive selection of general repair parts. From essential fittings and pop-up valves to high-pressure union adaptors and brass hose menders, we have everything you need to ensure your equipment operates smoothly and efficiently. Our parts are designed to withstand the rigorous demands of industrial applications, offering durability, reliability, and ease of installation. Browse our extensive inventory to find the exact components you need to maintain your blast pots and keep your operations running seamlessly.
