General Repair Parts for Blast Pots
Showing 1–15 of 127 results
-
From gaskets and crabs to covers and bolts, BlastOne has all the replacement parts you need to repair the Handhole / Manway access panels for Axxiom / Schmidt blast pots.
- Special note: Be sure to try out the SureFit™ Handway gasket for the 6.5 pot. It makes installation much easier & faster. Lasts longer too!
- Note: Versions of these access assemblies have changed over the years. If any doubt which version you need, send us the model year and serial number of your blast pot to confirm the correct part before ordering.
-
GR120700Pipe fitters and maintenance workers routinely use these fittings in many applications. Details as follows:
- 1-¼" - 11 ½ NPTF thread size
- Carbon Steel, Hex Nipple Design - makes installation easier
- 3000 PSI Operating Pressure with 4:1 Safety factor
GR120700Pipe fitters and maintenance workers routinely use these fittings in many applications. Details as follows:- 1-¼" - 11 ½ NPTF thread size
- Carbon Steel, Hex Nipple Design - makes installation easier
- 3000 PSI Operating Pressure with 4:1 Safety factor
-
BlastOne has the parts needed to service and maintain all Axxiom / Schmidt blast pots. The following are the common Pop Up components - contact us if you do not see the version you need. Pop-up Valve and Shaft (aka Pop-up Head)
- Hemispherical pop-up valve seals off pot when pressurized
- Shaft is embedded in the urethane head
- Suits Schmidt's contractor series blast pots
- Available in the following:
- MPN 2100-000, Small, for 1.5 CF pots
- MPN 2100-010, Standard, for 3.5, 6.5, 10, & 20CF pots
- MPN 2100-010-04, Alternate for Standard sizes, designed for high flow
- Available in the following:
- MPN 2100-001, Small, for 1.5 CF pots
- MPN 2100-011, Standard, for 3.5, 6.5, 10 & 20 CF pots
- MPN 2100-011-04, “Sure-Seal” Alternate for standard sizes, good when applications include blasting at low pressures. Use with 2100-010-04 pop-up head.
-
GR157705Experience unmatched durability and efficiency with the 1/4" NPTM x 3/8" NPSF High Pressure Union Adaptor, SKU: GR157705. A must-have for industrial applications!
- Robust Construction: Engineered for high-pressure environments.
- Versatile Compatibility: Fits 1/4" NPTM and 3/8" NPSF connections seamlessly.
- Leak-Proof Design: Ensures a secure, tight seal every time.
- Easy Installation: Quick and hassle-free setup.
- Corrosion Resistant: Withstands harsh industrial conditions.
GR157705Experience unmatched durability and efficiency with the 1/4" NPTM x 3/8" NPSF High Pressure Union Adaptor, SKU: GR157705. A must-have for industrial applications!- Robust Construction: Engineered for high-pressure environments.
- Versatile Compatibility: Fits 1/4" NPTM and 3/8" NPSF connections seamlessly.
- Leak-Proof Design: Ensures a secure, tight seal every time.
- Easy Installation: Quick and hassle-free setup.
- Corrosion Resistant: Withstands harsh industrial conditions.
-
- Female Pipe Coupling
- FP x FP
- Solid Machined Brass
- Performs to SAE J530 and J531 Standards
- Working Pressure: 1,000 PSI
- Temperature Range: -65°F to +250°F
-
BlastOne offers a full selection of industrial fittings. This group is the Brass Reducer Bushings. Other information is as follows:
- 1st dimension is the NPTF Male Pipe size
- 2nd dimension is the NPTF Female Pipe size
- Operating Pressure Range: 1000 PSI
- Operating Temperature Range: -65 to 250F
-
BlastOne offers a full selection of industrial fittings. This group is the Hex Nipples. Other information is as follows:
- NPTF Male Threads
- Both standard and reducer versions available
- Operating Pressure Range: 1000 PSI
- Operating Temperature Range: -65 to 250F
-
FPGE50T20
- 2" with ¾" takeoff
- Durable galvanized steel construction
- Secure and leak-proof fittings
- High resistance to corrosion
FPGE50T20- 2" with ¾" takeoff
- Durable galvanized steel construction
- Secure and leak-proof fittings
- High resistance to corrosion