My Account
General Purpose Nozzles
Showing all 5 results
-
This general-purpose nozzle was designed for everyday use, only better - it lasts longer and offers greater ease of use! It features the following: Click for Buying Guide- Performance characteristics:
- Venturi design provides up to 40% faster production than straight bore versions.
- Thread type & Orifice Size options:
- Contractor 2" (50mm)
- Fine 1-¼" (32mm)
- Orifice size options: 3, 4, 5, 6, 7, 8
- Liner:
- Silicon nitride, provides longer life and lighter weight than tungsten carbide.
- Jacket:
- All-polyurethane – reduces ‘jams’ in metal nozzle holders
- Shock absorbent, lightweight urethane jacket protects the blast nozzle liner
- Design:
- 1" throat entry on #3 and #4 Contractor thread AND all Fine thread options
- 1-¼" throat entry on #5, 6, 7, and 8 Contractor threads
- Additional notes:
- Approximately half the weight of standard tungsten carbide nozzles.
- Although the up-front cost is higher than tungsten carbide, the longer life Ultra-Tuff offers same or better total cost of ownership.
- Performance characteristics:
-
Designed with an extra-long venturi and concentrated blast pattern, the Hyper (aka XL or Saber) nozzle increases performance substantially. Additional details as follows: Click for Buying Guide
- Performance characteristics:
- Up to 30% faster coating removal and/or
- Allows greater stand-off distance (reduces need to bend over when blasting tank floors, allows greater reach, etc.)
- Thread types & Orifice Size options:
- Contractor 2" (50mm)
- Fine 1-¼" (32mm)
- Orifice size options: 5, 6, 7, 8, & 10
- Liner:
- SiALON silicon nitride, provides longer life and lighter weight than tungsten carbide.
- Jacket:
- All aluminum, non-slip knurled finish
- Design:
- 1-¼" throat entry, extended venturi, 12 inches long
- Performance characteristics:
-
Standard Tungsten Carbide (aka TVP) blast nozzles are widely used and are a lower-cost, basic general-purpose nozzle with the following characteristics: Click for Buying Guide
- Performance characteristics:
- Venturi design offers up to 40% greater production than straight bore.
- Thread Types:
- 1-1/4" NPSM (32mm) brass fine threads
- 2" (50mm) aluminum contractor threads
- Flange type (unthreaded, and attaches to a blast hose with a standard blast hose quick coupling instead of a nozzle holder)
- Orifice Sizes:
- Contractor & Fine: 3, 4, 5, 6, 7, 8, 10, 12
- Flanged: 6, 7, 8, 10, 12
- Liner:
- Tungsten Carbide, provides longer life than disposable alternatives for industrial blasting projects
- Jacket:
- Contractor and Fine thread versions have poly jacket
- Flanged type is an all-aluminum jacket
- Design:
- 1" (25mm) throat entry for #3 and #4 sizes
- 1 1/4" (32mm) throat entry, for all other sizes
- Additional notes:
- Lowest up-front cost of any industrial blast nozzle.
- Higher weight and shorter lifespan than premium silicon nitride versions.
- Lower total cost of ownership, higher performance, and/or improved ease-of-use may be achieved with one of the premium nozzle options. See You May Also Like below.
- Performance characteristics:
-
- 2" UNC (50mm) coarse Contractor thread 'C' or 1 1/4" NPSM (32mm) Fine Industrial thread 'F'
- Square thorat entry, venturi
- Tungsten carbide liner
- Urethane jacket, brass thread
- Large square blast pattern - less overlap when blasting
- Alignment ridges on jacket
-
BNATLW3C
- 2" UNC (50 mm) coarse Contractor thread
- 1 1/4" (32 mm) wide throat entry, long venturi
- Tungsten carbide liner
- 'The Original' Contractor favorite
- Standard weight aluminum jacket and thread
- Use HF G32P nozzle washes (not included - order separately)
BNATLW3C- 2" UNC (50 mm) coarse Contractor thread
- 1 1/4" (32 mm) wide throat entry, long venturi
- Tungsten carbide liner
- 'The Original' Contractor favorite
- Standard weight aluminum jacket and thread
- Use HF G32P nozzle washes (not included - order separately)
