Deadman / Control Systems
Showing 1–15 of 90 results
-
The Axxiom ShortStop prevents accidental activation of electric deadman systems caused by short-circuits in the control cable. This safety-enhancing option is especially beneficial when blasting at heights, or in applications where the control cable is susceptible to high wear. The ShortStop PnP (Plug-n-play) is simple to install and includes the control module and junction box needed to convert existing electric control systems*. Both single-outlet and 4-outlet bulk pot conversions are available. *Note: Deadman handles are unique to the ShortStop PnP. Conversion kits do not include handles, which are available separately on this page.
-
DM2152ACSThis kit includes all parts needed to change from blasting to blow-off at the flip of a switch at the deadman. Eliminates need for a separate air-hose or trekking back to the pot to shut off the abrasive. This version is for pots with an existing Thompson 2 valve and pneumatic controls.DM2152ACSThis kit includes all parts needed to change from blasting to blow-off at the flip of a switch at the deadman. Eliminates need for a separate air-hose or trekking back to the pot to shut off the abrasive. This version is for pots with an existing Thompson 2 valve and pneumatic controls.
-
DMMEM100KITThe Controlled Expansion Nozzle (CEN) Muffler Kit by Axxiom / Schmidt for Mega Pots significantly improves safety as well as reducing blowdown noise.
- Using a CEN muffler removes the risk of freeze-up at the vent. Without this muffler, dangerous pressure can remain in the pot due to vent freeze-up. Injury or death can result to an operator who removes the abrasive loading cover under pressure.
- In addition, noise levels during blowdown without a CEN can exceed 140db. With the CEN, the noise is reduced to 92db.
- The kit includes a 3" NPT thread connection. As mounting brackets are not included in the kit (due to the restriction on welding on a pressure vessel after certification), customer will need to decide best place for mounting, possibly using the ladder. BlastOne technicians are available - contact us if any questions.
DMMEM100KITThe Controlled Expansion Nozzle (CEN) Muffler Kit by Axxiom / Schmidt for Mega Pots significantly improves safety as well as reducing blowdown noise.- Using a CEN muffler removes the risk of freeze-up at the vent. Without this muffler, dangerous pressure can remain in the pot due to vent freeze-up. Injury or death can result to an operator who removes the abrasive loading cover under pressure.
- In addition, noise levels during blowdown without a CEN can exceed 140db. With the CEN, the noise is reduced to 92db.
- The kit includes a 3" NPT thread connection. As mounting brackets are not included in the kit (due to the restriction on welding on a pressure vessel after certification), customer will need to decide best place for mounting, possibly using the ladder. BlastOne technicians are available - contact us if any questions.
-
DMRMCATCSGBlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement gasket for 1" abrasive trap (factory part number 02434).DMRMCATCSGBlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement gasket for 1" abrasive trap (factory part number 02434).
-
- The safest deadman on the market - mechanically prevents inadvertent activation
- Redundant spring-loaded safety latch assures base stays wrapped around blast hose
- The BAABS system is built around the G3 Trigger Deadman handle
- Modular configurations
- Unrivaled comfort - ergonomic grip design allows for increased control
- Thrust pad and side grip can be quickly configured for left- or right-handed operation
- Handles and grips can be adjusted to accommodate varying arm lengths
- Can be easily retrofitted over most blast hoses
- Genuine Schmidt® part manufactured in the USA
-
- Premium Deadman Technology
- Comfortable to hold - increases operator compliance
- Available as Electric or Pneumatic in 2 configurations each:
- 2-position (on/off) version
- 3-position version with the following:
- Position 1 - Air Off / Abrasive Off
- Position 2 - Air On / Abrasive Off (for blowing off)
- Position 3 - Air On / Abrasive On (for blasting)
- This handle can be used with any blast control setup, but comes standard with each new BAABS deadman system purchase - see here for the main BAABS page.
- Genuine Products - Manufactured by Schmidt / Axxiom Manufacturing
-
DMECK3999
- Abrasion resistant, flex coated control cable
- Designed to clip onto your battery and connect to your electric deadman control box
- Powers your deadman system from your compressor or any other 12v available battery.
DMECK3999- Abrasion resistant, flex coated control cable
- Designed to clip onto your battery and connect to your electric deadman control box
- Powers your deadman system from your compressor or any other 12v available battery.
-
AVAILABLE FOR RENTAL OR PURCHASE
- #1 Deadman in the industry
- Larger internal ports make it faster acting, making it a safer handle
- Compact, slimline design - 30% easier then other handles to hold down
- Simple to make in-field repairs as required
- Available as Electric or Pneumatic
- Geniune Products - Manufactured by Schmidt / Axxiom Manufacturing
-
DMRGNE2000PC
- Large blade design
- 12 Volt or 24 volt electric operation
- Unit supplied with 12" (300mm) short cable
- Comes with TwistLok plug
DMRGNE2000PC- Large blade design
- 12 Volt or 24 volt electric operation
- Unit supplied with 12" (300mm) short cable
- Comes with TwistLok plug
-
DMRGN1000
- Conventional bleeder-type deadman control handle
- 1/4" (6mm) (supply) x 1/8" (3mm) (return) threaded connectors
- Large lever design
- Use only with equipment designed for bleeder-style handles - DO NOT use with Combo or Thompson Valves
DMRGN1000- Conventional bleeder-type deadman control handle
- 1/4" (6mm) (supply) x 1/8" (3mm) (return) threaded connectors
- Large lever design
- Use only with equipment designed for bleeder-style handles - DO NOT use with Combo or Thompson Valves
-
DMRCC100
- Conventional, bleeder-style handle – do not use with Combo or Thompson valves
- RCC Aluminum "Bleeder" pneumatic remote control handle
- Large-lever design
- ¼" (6 mm) (supply) x ⅛" (3 mm) (return) threaded connectors
- Recommended upgrade to a non-breather deadman handle
- Genuine Parts - Manufactured by Clemco
DMRCC100- Conventional, bleeder-style handle – do not use with Combo or Thompson valves
- RCC Aluminum "Bleeder" pneumatic remote control handle
- Large-lever design
- ¼" (6 mm) (supply) x ⅛" (3 mm) (return) threaded connectors
- Recommended upgrade to a non-breather deadman handle
- Genuine Parts - Manufactured by Clemco
-
DMRMCATCKBlastOne has the parts to maintain your Clemco® blast equipment. This is the rebuild kit for 1" abrasive trap on the RMC valve (factory part number 01925). Includes the following:
- DMRMCATCS Abrasive Trap Screen (3)
- BA02013 O-Ring (2)
- Clean Screen Decal (Not available separately)
- DMRMCATCSG Gasket
DMRMCATCKBlastOne has the parts to maintain your Clemco® blast equipment. This is the rebuild kit for 1" abrasive trap on the RMC valve (factory part number 01925). Includes the following:- DMRMCATCS Abrasive Trap Screen (3)
- BA02013 O-Ring (2)
- Clean Screen Decal (Not available separately)
- DMRMCATCSG Gasket
-
DMASAPRK00
- ASAP Safety System Retrofit Kit for 12V DC Thompson® Valve system.
- This System changes the depressurization flow of the air in the blast hose
- Allows a 200ft blast hose to depressurize in less than 1 second
- Changes the depressurization flow to exit backwards through full porting vs having to exit out of the blast nozzle
- Saves Seconds - Saves Lives, if a blaster drops a hose every micro-second counts, it takes the energy out of the hose immediately.
- Sold as a complete kit to be added on to an Electric Controlled Thompson® Valve Blast Pot
- Genuine Products - Manufactured by Schmidt® / Axxiom Manufacturing
DMASAPRK00- ASAP Safety System Retrofit Kit for 12V DC Thompson® Valve system.
- This System changes the depressurization flow of the air in the blast hose
- Allows a 200ft blast hose to depressurize in less than 1 second
- Changes the depressurization flow to exit backwards through full porting vs having to exit out of the blast nozzle
- Saves Seconds - Saves Lives, if a blaster drops a hose every micro-second counts, it takes the energy out of the hose immediately.
- Sold as a complete kit to be added on to an Electric Controlled Thompson® Valve Blast Pot
- Genuine Products - Manufactured by Schmidt® / Axxiom Manufacturing
-
The Air Pressure Gage is a crucial tool for monitoring air pressure in your blast equipment, ensuring optimal performance and safety. This general-purpose gage is sold individually and designed not to exceed the manufacturer's recommendation. Secure your blasting operations with this reliable Air Pressure Gage for precise and consistent air pressure tracking.
- General purpose air pressure gages for monitoring of air pressure
- Do not exceed manufacturers recommendation for blast equipment
- Sold Individually
-
FPSP25
- FPSP25, RB-2 Replacement 1" Threaded Plug
- For IPC1000 RotorBlast
- (Replaces part number IPC1001)
- Note: 4 of these are included in Spare Parts Kit, IPC1099
FPSP25- FPSP25, RB-2 Replacement 1" Threaded Plug
- For IPC1000 RotorBlast
- (Replaces part number IPC1001)
- Note: 4 of these are included in Spare Parts Kit, IPC1099