My Account
CO Monitors & Breathing Air Equip.
Showing 1–15 of 31 results
-
The Bullard Clean Air Box (CAB) offers tried-and-true breathing air filtration and carbon monoxide monitoring. Without the new features on the latest model AirGuard Breathing Air Box, they nonetheless provide required protection, and at a reduced cost.
With flexible configurations of 1, 2, 4, or 8 outlets at various capacities up to 100 CFM, the CAB Breathing Air Box can support small or large crews. NOTE: The actual number of personnel that any breathing air box can support is dictated by the box CFM capacity and the CFM requirements of their respirators, and NOT by the number of outlets on the box.
While not required by breathing air standards, adding a dedicated Air Gladiator breathing air filter in-line before the box will extend the life of the more expensive filters inside the box.
-
The Bullard Clean Air Box (CAB) Supplied Air filtration system can be easily maintained in the field. Replacing the filter elements is a common requirement, and they are available as follows:
- In 3 different sizes, depending on the size of your unit:
- 15/30 CFM size
- 50 CFM size
- 100 CFM size
- Available a la cart or in a kit of 3
Note: Filter life can be extended by adding a Bullard Air Gladiator filter in-line before the CAB.
- In 3 different sizes, depending on the size of your unit:
-
The GX4 is a smart, sophisticated gas monitor designed to keep your employees safe and your company compliant with breathing air safety standards. Features as follows:
- Capable. Monitors up to 4 gases simultaneously, including CO (carbon monoxide), O2 (oxygen), and HS2 (hydrogen sulfide) using the GVS Cartridge Sensors.
- Note: Unit comes standard with the CO cartridge only. Cartridges never need calibrating and last up to 2 years. Regular calibration checks to be performed by using the GVS / RPB GX4 Calibration Regulator Kit.
- Intelligent. Continuously logs real-time data such as gas concentration, air temperature, unit status, etc.
- Connected. Utilize access to your company's network or connect directly with your device using the built-in Wi-Fi Hotspot mode.
- Flexible. Powered by either a 12 volt vehicle battery clips (using cable with battery clips) or by a rechargeable Lithium battery.
- Safe. Built-in 103db alarm demands attention when unit detects the contaminants above the programmed levels. For the ultimate in safety, choose the version with RZ fittings. The RZ fittings are designed to work only with GVS / RPB breathing air equipment and cannot be accidentally connected to shop nitrogen lines. Note: Using RZ fittings will require use of breathing air line and respirators with these fittings as well.
- Customizeable. The following options are available:
- GX4 Heavy Duty Field Case - protects your investment when your projects are remote.
- GX4 Auxiliary Strobe Light / Alarm / Cable
- Can be surface or wall-mounted using the GX4® wall bracket - or mounted directly to an RPB® Radex Airline Filter.
- Genuine Product - Manufactured by GVS/RPB® and NIOSH approved with the Radex Breathing Air filter.
- Capable. Monitors up to 4 gases simultaneously, including CO (carbon monoxide), O2 (oxygen), and HS2 (hydrogen sulfide) using the GVS Cartridge Sensors.
-
APCMBCOHPThe Bullard COHP is a stand-alone Carbon Monoxide monitor, and is designed to be used in tandem with a Bullard breathing air canister filtration system. Additional details include:
- Does NOT remove carbon monoxide - this is a monitor only.
- This 10PPM unit is intended for the USA market. (5PPM versions available for other Canada and other markets.)
- Provides audible (90dB) and visual alarms when high CO, low battery, or low airflow conditions are present.
- Operates on either AC or DC power.
APCMBCOHPThe Bullard COHP is a stand-alone Carbon Monoxide monitor, and is designed to be used in tandem with a Bullard breathing air canister filtration system. Additional details include:- Does NOT remove carbon monoxide - this is a monitor only.
- This 10PPM unit is intended for the USA market. (5PPM versions available for other Canada and other markets.)
- Provides audible (90dB) and visual alarms when high CO, low battery, or low airflow conditions are present.
- Operates on either AC or DC power.
-
APCMFCABCKThis 34L Calibration Kit covers everything you need to perform bump tests on Bullard Clean Air Boxes. Details as follows:
- Includes:
- 34L canister of Zero Air
- 34L canister of 10ppm Air
- Regulator
- Tubing
- Fitting
- Carrying Case
- The 34L gas canisters typically last about 25 tests.
APCMFCABCKThis 34L Calibration Kit covers everything you need to perform bump tests on Bullard Clean Air Boxes. Details as follows:- Includes:
- 34L canister of Zero Air
- 34L canister of 10ppm Air
- Regulator
- Tubing
- Fitting
- Carrying Case
- The 34L gas canisters typically last about 25 tests.
Part Number Purchase Price APCMFCABCK $577.50 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$577.50
-
- Includes:
-
The Radex airline filter (aka canister filter) is the heart of the GVS / RPB breathing air system. Features as follows:
- Advanced Filtration. 6-stage filtering removes oils, odors, moisture, and particulates from breathing air
- Durable. Cast aluminum construction for lightweight durability on jobsites as well as in factories.
- Flexible. Can be either floor or wall mounted using the included twist-and-lock bracket
- Customizable. Comes with either 2-outlets (1 for an operator and 1 for the CO monitor) or 6 outlets. And if you already have a 2-outlet version and need to upgrade to 6, this can be done with the Radex Six Outlet Upgrade Kit.
- Other included features.
- 150 PSI safety pressure relief valve
- Quick Connect outlet ports
- Brass manual drain tap
- Pressure regulator to adjust outlet air pressure
- Replaceable APF3100 filter element (lasts up to 3 months or 400 working hours)
- Options.
- Auto Drain Unit. Automatically drains moisture from Radex, helping to prevent premature failure to the filter element due to maintenance oversight.
- Micro Mist Filter. Further removes moisture and oil. Recommended if compressor has possible moisture or oil blow-by issues. Reduces chance of oil contamination of CO monitor sensor.
- Mainline Pre-Filter. Extra support for particulate removal down to 0.15 microns and extends life of primary filter element.
- 2-claw “Chicago” fitting, #FMAKM12A. Used to connect the filter to the supply hose from the air compressor.
-
The Bullard Air Gladiator (aka breathing air canister filter) is an updated version of the previous 41 series. It has the same 7-stage filtration as before along with a new handle and mounting options. Additional details as follows:
- Available with 2 or 6 outlets
- Anti-tip base for portable applications
- Built-in handle doubles as a wall-mount bracket for stationary applications
-
APAFC80
- Breathing Air Filter to remove dust and oil particles
- Carbon Filter removes nuicance odors, must be replaced every 3 months.
- Suited for up to 4 operators
- DOES NOT remove carbon monoxide (CO)
- Cast metal body with bolted plastic base
- Includes inlet air hose connector
- Does not include double action quick connects - order separately
APAFC80- Breathing Air Filter to remove dust and oil particles
- Carbon Filter removes nuicance odors, must be replaced every 3 months.
- Suited for up to 4 operators
- DOES NOT remove carbon monoxide (CO)
- Cast metal body with bolted plastic base
- Includes inlet air hose connector
- Does not include double action quick connects - order separately
-
APCMF5000
Powerful Portable breathing air station with regulator
- 4 operators can use the one machine
- Not just a Carbon Monoxide monitor - this device actually removes CO, as well as odors, hydrocarbons, etc.
- Powered by two x 9 Volt batteries included
- Carbon Monoxide Monitors are normally mandated on most job sites
APCMF5000Powerful Portable breathing air station with regulator
- 4 operators can use the one machine
- Not just a Carbon Monoxide monitor - this device actually removes CO, as well as odors, hydrocarbons, etc.
- Powered by two x 9 Volt batteries included
- Carbon Monoxide Monitors are normally mandated on most job sites
-
- Portable Grade-D breathing air filtration system designed to filter incoming air from a compressor to provide Grade-D quality to respirator users while monitoring for CO and O2.
- Monitors for carbon monoxide with a 3 stage filtration system:
- First stage element filters bulk water and particulate and has an auto drain
- Second stage coalescing filter eliminates atomized oils, mists, ultra-fine particulates, and has an auto drain
- Third stage filter removes organic vapors and odors and has a manual drain
- Filter change indicators are standard on all three stages of filtration. Filtration efficiency is 99.99% at .01 micron.
- Incoming air plug with 1/2" industrial interchange
- Automatic drains with discharge tubes
- Three (3) standard power options available
- Operates on disposable 9-volt batteries, 8-16 volt DC, or 115 VAC
-
Bullard's latest Air Quality Box is the AirGuard. With improved ease-of-use and new capabilities, this unit is a valuable investment in your breathing air safety. Further details below.
- Flexible. Comes in 1, 2, 4, or 8 outlet configurations. And an optional wall-mount is available as well.
- Rugged. Designed for field use with a sturdy Pelican® case.
- Capable.
- Has three-stage filtration as follows:
- Particulate/Bulk Liquid Separation
- Oil Coalescing and Ultra Fine Particulates
- Activated Charcoal
- Monitors Carbon Monoxide as well as Dew Point.
- Has three-stage filtration as follows:
- Easy to use. Bright 7" LCD screen shows CO and Dew Point values. It also provides instructions to assist with calibration and reminds you when it's time to change the filters.
- State-of-the-art. Continuously logs conditions (which can be downloaded by using the built-in memory stick). This protects you in 2 ways:
- CO levels can be proven and Dew Point logs confirm what the atmospheric conditions were at any point of the monitored time.
- Logs data on the removable USB drive for easy transfer to existing record system
- Auto-Calibration scheduling, reduces administrative record keeping work.
- Power.
- Onboard battery, with expected operation of 16 hours when fully charged.
- The 12v DC battery charger can be used to operate the AirGuard if the battery charge is exhausted.
- Options.
- Remote alarm with 100' cable.
- 50' cable extensions
-
FBT5004
- 3/8"
- Brass composition
FBT5004- 3/8"
- Brass composition
-
APF3030
- Highly effective filtration system
- User-friendly installation process
- Long-lasting and reliable performance
- Promotes healthier air quality
APF3030- Highly effective filtration system
- User-friendly installation process
- Long-lasting and reliable performance
- Promotes healthier air quality
-
APCMF5500Calibration Kit includes:
- calibration tool
- regulator
- Zero Gas
- 5ppm calibration gas
- connector
- tubing
APCMF5500Calibration Kit includes:- calibration tool
- regulator
- Zero Gas
- 5ppm calibration gas
- connector
- tubing
-
HLCCD3522
- Powerful and efficient air circulation
- Enhanced ventilation for optimal air quality
- Durable construction for long-lasting performance
- Easy installation and maintenance
- Suitable for a wide range of industrial applications
HLCCD3522- Powerful and efficient air circulation
- Enhanced ventilation for optimal air quality
- Durable construction for long-lasting performance
- Easy installation and maintenance
- Suitable for a wide range of industrial applications
