Breathing Air Filtration & Monitors
Showing 1–15 of 60 results
-
The GX4 is a smart, sophisticated gas monitor designed to keep your employees safe and your company compliant with breathing air safety standards. Features as follows:
- Capable. Monitors up to 4 gases simultaneously, including CO (carbon monoxide), O2 (oxygen), and HS2 (hydrogen sulfide) using the GVS Cartridge Sensors.
- Note: Unit comes standard with the CO cartridge only. Cartridges never need calibrating and last up to 2 years. Regular calibration checks to be performed by using the GVS / RPB GX4 Calibration Regulator Kit.
- Intelligent. Continuously logs real-time data such as gas concentration, air temperature, unit status, etc.
- Connected. Utilize access to your company's network or connect directly with your device using the built-in Wi-Fi Hotspot mode.
- Flexible. Powered by either a 12 volt vehicle battery clips (using cable with battery clips) or by a rechargeable Lithium battery.
- Safe. Built-in 103db alarm demands attention when unit detects the contaminants above the programmed levels. For the ultimate in safety, choose the version with RZ fittings. The RZ fittings are designed to work only with GVS / RPB breathing air equipment and cannot be accidentally connected to shop nitrogen lines. Note: Using RZ fittings will require use of breathing air line and respirators with these fittings as well.
- Customizeable. The following options are available:
- GX4 Heavy Duty Field Case - protects your investment when your projects are remote.
- GX4 Auxiliary Strobe Light / Alarm / Cable
- Can be surface or wall-mounted using the GX4® wall bracket - or mounted directly to an RPB® Radex Airline Filter.
- Genuine Product - Manufactured by GVS/RPB® and NIOSH approved with the Radex Breathing Air filter.
- Capable. Monitors up to 4 gases simultaneously, including CO (carbon monoxide), O2 (oxygen), and HS2 (hydrogen sulfide) using the GVS Cartridge Sensors.
-
APCMFCABCKThis 34L Calibration Kit covers everything you need to perform bump tests on Bullard Clean Air Boxes. Details as follows:
- Includes:
- 34L canister of Zero Air
- 34L canister of 10ppm Air
- Regulator
- Tubing
- Fitting
- Carrying Case
- The 34L gas canisters typically last about 25 tests.
APCMFCABCKThis 34L Calibration Kit covers everything you need to perform bump tests on Bullard Clean Air Boxes. Details as follows:- Includes:
- 34L canister of Zero Air
- 34L canister of 10ppm Air
- Regulator
- Tubing
- Fitting
- Carrying Case
- The 34L gas canisters typically last about 25 tests.
- Includes:
-
The Radex airline filter (aka canister filter) is the heart of the GVS / RPB breathing air system. Features as follows:
- Advanced Filtration. 6-stage filtering removes oils, odors, moisture, and particulates from breathing air
- Durable. Cast aluminum construction for lightweight durability on jobsites as well as in factories.
- Flexible. Can be either floor or wall mounted using the included twist-and-lock bracket
- Customizable. Comes with either 2-outlets (1 for an operator and 1 for the CO monitor) or 6 outlets. And if you already have a 2-outlet version and need to upgrade to 6, this can be done with the Radex Six Outlet Upgrade Kit.
- Other included features.
- 150 PSI safety pressure relief valve
- Quick Connect outlet ports
- Brass manual drain tap
- Pressure regulator to adjust outlet air pressure
- Replaceable APF3100 filter element (lasts up to 3 months or 400 working hours)
- Options.
- Auto Drain Unit. Automatically drains moisture from Radex, helping to prevent premature failure to the filter element due to maintenance oversight.
- Micro Mist Filter. Further removes moisture and oil. Recommended if compressor has possible moisture or oil blow-by issues. Reduces chance of oil contamination of CO monitor sensor.
- Mainline Pre-Filter. Extra support for particulate removal down to 0.15 microns and extends life of primary filter element.
- 2-claw “Chicago” fitting, #FMAKM12A. Used to connect the filter to the supply hose from the air compressor.
-
APCMB8428RZ
- Air Supply Hose RZ Fitting (08-428-RZ)
- Use with GX4
- Genuine RPB product
APCMB8428RZ- Air Supply Hose RZ Fitting (08-428-RZ)
- Use with GX4
- Genuine RPB product
-
APCMB8450
- Calibration Adapter (08-450)
- Use with GX4 Gas Monitor
- Genuine RPB product
APCMB8450- Calibration Adapter (08-450)
- Use with GX4 Gas Monitor
- Genuine RPB product
-
APCMB8470
- External Flow Regulator (08-470)
- Use for GX4 Gas Monitor
- Genuine RPB product
APCMB8470- External Flow Regulator (08-470)
- Use for GX4 Gas Monitor
- Genuine RPB product
-
APCMB8429
- M5 Inlet Filter (08-429)
- Use for GX4
- Genuine RPB product
APCMB8429- M5 Inlet Filter (08-429)
- Use for GX4
- Genuine RPB product
-
APCMB8425
- Mounting Bracket (08-425)
- Sold in pair
- Use with GX4
- Genuine RPB product
APCMB8425- Mounting Bracket (08-425)
- Sold in pair
- Use with GX4
- Genuine RPB product
-
APCMB8422
- Sensor Manifold Tube (08-422)
- Use with GX4
- Genuine RPB product
APCMB8422- Sensor Manifold Tube (08-422)
- Use with GX4
- Genuine RPB product
-
APCMB8428
- Air Supply Hose (08-428)
- Use with GX4
- Genuine RPB product
APCMB8428- Air Supply Hose (08-428)
- Use with GX4
- Genuine RPB product
-
APCMB8420
- Blank Sensor Case (08-420)
- Use with GX4
- Genuine RPB product
APCMB8420- Blank Sensor Case (08-420)
- Use with GX4
- Genuine RPB product
-
APCMB8470RZ
- RZ fitted External Flow Regulator (08-470-RZ)
- Use with GX4 Gas Monitor
- Genuine RPB product
APCMB8470RZ- RZ fitted External Flow Regulator (08-470-RZ)
- Use with GX4 Gas Monitor
- Genuine RPB product
-
Power supply options for the GX4 Gas Monitor include:
- 12V Cable with Battery Clips (08-431)
- 110V Power Adaptor Pack (08-430)