My Account
Blasting, UHP & Site Equipment
Showing 106–120 of 600 results
-
MKCOMBI- Designed specifically to recycle garnet abrasive on a large project site
- Uses an oversized airwash to effectively remove all paint chips and other waste from the abrasive
- GMA Garnet will recycling between 5-7 times effectively, reducing the cost of your abrasive
- Ideal for large project sites where abrasive consumption is in excess of 200ton/month.
- Pricing varies depending on application, but budget $175,000
- Processes up to 7 tons per hour of garnet
- Note: Abrasive can be recycled only if it is totally dry
MKCOMBI- Designed specifically to recycle garnet abrasive on a large project site
- Uses an oversized airwash to effectively remove all paint chips and other waste from the abrasive
- GMA Garnet will recycling between 5-7 times effectively, reducing the cost of your abrasive
- Ideal for large project sites where abrasive consumption is in excess of 200ton/month.
- Pricing varies depending on application, but budget $175,000
- Processes up to 7 tons per hour of garnet
- Note: Abrasive can be recycled only if it is totally dry
Part Number Purchase Price MKCOMBI Request Quote Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.Request Quote
-
-
VAVaculoadIVAVAILABLE FOR RENTAL OR PURCHASE ABRASIVE RECOVERY VACUUM SYSTEM
- Will vacuum up to 8 ton/hour of garnet
- Requires 900cfm of air at 120 psi to operate
- Skid mounted abrasive recovery system, Pneumatically operated
- 4 Dust Collector Cartridges with filtration area of 904 sq ft.
- Automatic Reverse Pulse Cleaning
- Works best for dry media disposal
VAVaculoadIVAVAILABLE FOR RENTAL OR PURCHASE ABRASIVE RECOVERY VACUUM SYSTEM- Will vacuum up to 8 ton/hour of garnet
- Requires 900cfm of air at 120 psi to operate
- Skid mounted abrasive recovery system, Pneumatically operated
- 4 Dust Collector Cartridges with filtration area of 904 sq ft.
- Automatic Reverse Pulse Cleaning
- Works best for dry media disposal
Part Number Purchase Price VAVaculoadIV Request Quote Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.Request Quote
-
-
VCVRS3
- This Blast and Vacuum BRS system is built for high production vacuum blasting work.
- The Vacuum system, blast machine and airdryer are all mounted to one skid.
- The abrasive does not recycle which is ideal when you have very low dust requirements or when your specification calls for the use of virgin abrasive only.
- This system is 100% pnuematic and does not require any electrical power.
- Blast Pot capacity is 3.5 cuft.
- Blast upto 60 sqft / 6 sqm per hour
- Requires 750cfm of air
VCVRS3- This Blast and Vacuum BRS system is built for high production vacuum blasting work.
- The Vacuum system, blast machine and airdryer are all mounted to one skid.
- The abrasive does not recycle which is ideal when you have very low dust requirements or when your specification calls for the use of virgin abrasive only.
- This system is 100% pnuematic and does not require any electrical power.
- Blast Pot capacity is 3.5 cuft.
- Blast upto 60 sqft / 6 sqm per hour
- Requires 750cfm of air
Part Number Purchase Price VCVRS3 Request Quote Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.Request Quote
-
-
VAVacuInt55AVAILABLE FOR RENTAL OR PURCHASE
- Capacity of 4 tons of garnet
- Designed to sit between the VacuLoad and the vacuum head
- Separates abrasive and 90% of dust for reuse or disposal
- Available in 3 sizes – 20, 55, and 100 cu.ft
- Acts as a cyclone separator using power from the main vacuum unit
- No need for compressed air or electric power
- Ideal for abrasive storage
VAVacuInt55AVAILABLE FOR RENTAL OR PURCHASE- Capacity of 4 tons of garnet
- Designed to sit between the VacuLoad and the vacuum head
- Separates abrasive and 90% of dust for reuse or disposal
- Available in 3 sizes – 20, 55, and 100 cu.ft
- Acts as a cyclone separator using power from the main vacuum unit
- No need for compressed air or electric power
- Ideal for abrasive storage
Part Number Purchase Price VAVacuInt55 Request Quote Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.Request Quote
-
-
MK3STORAGE6
- Capacity to hold 6 ton of Garnet
- Size capacity of 200 cubic foot
- 2 bottom outlets fitted with a slidegate shut off
- Loading port and an access hatch located in the top of the hopper
- Typically used in conjunction with the MKIII recycling system
MK3STORAGE6- Capacity to hold 6 ton of Garnet
- Size capacity of 200 cubic foot
- 2 bottom outlets fitted with a slidegate shut off
- Loading port and an access hatch located in the top of the hopper
- Typically used in conjunction with the MKIII recycling system
Part Number Purchase Price MK3STORAGE6 Request Quote Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.Request Quote
-
-
Camlock fittings allow quicker connections between sections of vacuum hose. Faster & easier than using tape.
- This group is Type A version, with male adapter coupling and female NPT thread
- Connect same size hoses or adapt different sizes together
- Save time and use Quick Disconnect (QD) fittings
- Economical Aluminum version shown.
- Other materials are available - inquire.
-
Camlock fittings allow quicker connections between sections of vacuum hose. Faster & easier than using tape.
- This group is Type B version, with Female coupler and Male NPT
- Connect same size hoses or adapt different sizes together
- Save time and use Quick Disconnect (QD) fittings
- Economical Aluminum with Brass handles shown.
- Other materials are available - inquire.
-
Camlock fittings allow quicker connections between sections of vacuum hose. Faster and easier than using tape.
- This group is Type C version, with male hose barb and female connection
- Connect same size hoses or adapt different sizes together
- Save time and use Quick Disconnect (QD) fittings
- Economical Aluminum with brass handles shown.
- Other materials are available - inquire.
-
Camlock fittings allow quicker connections between sections of vacuum hose. Faster & easier than using tape.
- This group is Type D version, with female coupler and female NPT thread
- Connect same size hoses or adapt different sizes together
- Save time and use Quick Disconnect (QD) fittings
- Economical Aluminum version shown.
- Other materials are available - inquire.
-
Camlock fittings allow quicker connections between sections of vacuum hose. Faster & easier than using tape.
- This group is Type E version, with male hose barb and male connection
- Connect same size hoses or adapt different sizes together
- Save time and use Quick Disconnect (QD) fittings
- Economical Aluminum shown
- Other materials are available - inquire.
-
Camlock fittings allow quicker connections between sections of vacuum hose. Faster & easier than using tape.
- This group is Type F version, with male adapter coupling and male NPT thread
- Connect same size hoses or adapt different sizes together
- Save time and use Quick Disconnect (QD) fittings
- Economical Aluminum version shown.
- Other materials are available - inquire.
-
- Popular choice to secure fittings to vacuum hoses.
- Can be used on many other applications.
- Constructed of zinc-plated ductile iron.
-
Secure your Fittings onto your vac hose with these spiral clamps.
- CopperVac vac hoses have Counter Clockwise helixes
- Most Kuriyama Tigerflex vac hoses (except TR1) are also Counter Clockwise
- ContiTech vac hoses can be either.
- If unsure, here is how to determine which direction your hose is:
- Look at either end of your hose and find the exposed helix cord.
- Starting from the helix, follow which way the winding goes down the hose.
-
Improve your vacuum performance with industrial-grade accessories.
- Designed for use with industrial vacuums
- Available for various sizes of vac hose
- Optional handles / wheels available for the bulk tool
-
- Premium Deadman Technology
- Comfortable to hold - increases operator compliance
- Available as Electric or Pneumatic in 2 configurations each:
- 2-position (on/off) version
- 3-position version with the following:
- Position 1 - Air Off / Abrasive Off
- Position 2 - Air On / Abrasive Off (for blowing off)
- Position 3 - Air On / Abrasive On (for blasting)
- This handle can be used with any blast control setup, but comes standard with each new BAABS deadman system purchase - see here for the main BAABS page.
- Genuine Products - Manufactured by Schmidt / Axxiom Manufacturing
