Blasting, UHP & Site Equipment
Showing 466–480 of 600 results
-
BNATC360CTIP
- Replacement Tungsten Carbide Deflector Tip for BNATC360C internal pipe blasting nozzle.
- Ensures optimal blasting efficiency and durability.
BNATC360CTIP- Replacement Tungsten Carbide Deflector Tip for BNATC360C internal pipe blasting nozzle.
- Ensures optimal blasting efficiency and durability.
-
HTIBIX09NK
- Suits IBIX 6 Easy Blaster (HTIBIX06EB)
- Genuine part – manufactured by IBIX
- Nozzle Kit
- Sold individually
HTIBIX09NK- Suits IBIX 6 Easy Blaster (HTIBIX06EB)
- Genuine part – manufactured by IBIX
- Nozzle Kit
- Sold individually
-
Thread adapters are a convenient way to allow nozzles of one thread type to be used in nozzle holders of a different type. Boron Carbide is the longest life version, but not available in all configurations. Polyurethane, steel, aluminum, etc. are also available and are lower in cost.
- Available configurations:
- Contractor (2" / 50mm) Thread Nozzle Holders to:
- ¾" (20mm) Medium Thread nozzles
- 1-¼" (32mm) Fine Thread nozzles
- Flange nozzles
- Fine (1-¼" / 32mm) Thread Nozzle Holders to:
- ¾" (20mm) Medium Thread nozzles
- 2" / 50mm Contractor thread nozzles. This is a BlastOne Exclusive!
- Contractor (2" / 50mm) Thread Nozzle Holders to:
- Available configurations:
-
GRACO® SPECIAL PURCHASE - ECOQUIP FINAL CLEARANCE! These hoses and nozzles are top quality new condition, and work on all abrasive blasting equipment (not just EcoQuip). These special-purchase products include the following:
- EcoQuip “Replacement” blast hose assemblies, which include coupling / nozzle holder, control line, and a Schmidt® Response deadman handle, in both pneumatic and electric.
- EcoQuip “Extension” blast hose assemblies, which include couplings and control line, in both pneumatic and electric.
- EcoQuip "Bulk Hose", 50' sections of blast hose, without any accessories
- Graco blast nozzles in the following types:
- Standard (contractor thread)
- Hyper (contractor thread)
- SST (medium thread)
- Double Venturi (contractor thread)
-
BAHNGN5
- Suits the Nozzle Pressure Test Kit
- Size: 18G x 1-½”
- Comes in 5 pack
BAHNGN5- Suits the Nozzle Pressure Test Kit
- Size: 18G x 1-½”
- Comes in 5 pack
-
- Suits AHR general purpose air hose
- Two piece fitting, hose tail to swivel nut female thread
- Various clamping options - double bolt clamp or bandit clamp
- Sold individually
-
BA700751903
- O-Ring Seal for 10” Schmidt blast pot closure 7mm section
- Used to create a complete seal on the top of the megablaster
- Recommend you replace seal at first sign of wear
- Sold Individually
- Genuine Parts - Manufactured by Schmidt / Axxiom Manufacturing
BA700751903- O-Ring Seal for 10” Schmidt blast pot closure 7mm section
- Used to create a complete seal on the top of the megablaster
- Recommend you replace seal at first sign of wear
- Sold Individually
- Genuine Parts - Manufactured by Schmidt / Axxiom Manufacturing
-
DM222900007
- Suits Pneumatic Control Valve DM2229000
- Replacement Large O-Ring to ensure the piston seal is good
- Sold Individually
- Genuine Parts - Manufactured by Schmidt / Axxiom Manufacturing
DM222900007- Suits Pneumatic Control Valve DM2229000
- Replacement Large O-Ring to ensure the piston seal is good
- Sold Individually
- Genuine Parts - Manufactured by Schmidt / Axxiom Manufacturing
-
DM222900099
- Suits Pneumatic Blast Pot Control Valve DM2229000
- Service Kit is used to keep your blast pot operational
- Sold as a Kit containing;
- Piston
- Spring
- Replacement O-rings
DM222900099- Suits Pneumatic Blast Pot Control Valve DM2229000
- Service Kit is used to keep your blast pot operational
- Sold as a Kit containing;
- Piston
- Spring
- Replacement O-rings
-
BA871098627
- Suits Blast Pot timer
- Pressure Switch to allow hour counter to count actual blasting hours
- Working PSI range of 10-150 PSI
- Sold Individually
BA871098627- Suits Blast Pot timer
- Pressure Switch to allow hour counter to count actual blasting hours
- Working PSI range of 10-150 PSI
- Sold Individually
-
DM226300420BlastOne has the parts needed for your MiniBRS G2 Trigger Workheads. This is the Pneumatic Trigger Module Assembly (2263-004-20). An Electric G2 Trigger Deadman control module is also available for 12 volt systems.DM226300420BlastOne has the parts needed for your MiniBRS G2 Trigger Workheads. This is the Pneumatic Trigger Module Assembly (2263-004-20). An Electric G2 Trigger Deadman control module is also available for 12 volt systems.
-
AVAILABLE FOR RENTAL OR PURCHASE Every BlastOne dehumidifier has the following features:
- Unit-mounted filters, options include:
- 10% permanent washable 2" thick industrial
- 30% 2" (standard) pleated throw away
- 55% to 65% 4" cartridge throw away
- 99.97% HEPA 12" cartridge
- G-90 16-gage galvanized double-wall construction with insulation
- Direct-fired natural-gas, electric or propane reactivation systems
- Cooling coil and heating coil options
- Skid or trailer mounted
- Full protective enclosure
- Integrated control system with 10-point operational function display
- Shipping covers for all inlets and outlets
- Packaged refrigeration system options
- Packaged generator system options
- Unit-mounted filters, options include:
-
ACFRL06
- 3-piece filter/regulator/lubricator
- Compact body design
- 2-piece modular joiner set
- Snap-lock knob prevents accidental change of set pressure
- Easy-to-read pressure gauge included
- Maximum supply pressure - 150psi
- Wall mount brackets included
- Manufactured by Wilkerson®
ACFRL06- 3-piece filter/regulator/lubricator
- Compact body design
- 2-piece modular joiner set
- Snap-lock knob prevents accidental change of set pressure
- Easy-to-read pressure gauge included
- Maximum supply pressure - 150psi
- Wall mount brackets included
- Manufactured by Wilkerson®
-
ACFRL13400MPBoost your 400cfm Schmidt® AirPrep™ Air Dryer's efficiency with the 1/2" Filter/Regulator/Lubricator (SKU: ACFRL13400MP) by Master Pneumatic®. This FRL unit combines MP165 filter/regulator and MP167 lubricator for optimal performance.
- 1/2" Filter/Regulator/Lubricator designed exclusively for Schmidt® AirPrep™ 400cfm Air Dryers.
- Features both MP165 filter/regulator and MP167 lubricator for a comprehensive air system care.
- Manufactured by the esteemed Master Pneumatic® brand.
- Master Pneumatic® specializes in a wide range of FRL combinations, catering to various applications.
- A crucial addition for maximizing the efficiency and lifespan of your air dryer systems.
ACFRL13400MPBoost your 400cfm Schmidt® AirPrep™ Air Dryer's efficiency with the 1/2" Filter/Regulator/Lubricator (SKU: ACFRL13400MP) by Master Pneumatic®. This FRL unit combines MP165 filter/regulator and MP167 lubricator for optimal performance.- 1/2" Filter/Regulator/Lubricator designed exclusively for Schmidt® AirPrep™ 400cfm Air Dryers.
- Features both MP165 filter/regulator and MP167 lubricator for a comprehensive air system care.
- Manufactured by the esteemed Master Pneumatic® brand.
- Master Pneumatic® specializes in a wide range of FRL combinations, catering to various applications.
- A crucial addition for maximizing the efficiency and lifespan of your air dryer systems.
-
ACFRL131600MPExperience enhanced air dryer performance with the 1/2" Filter/Regulator/Lubricator (SKU: ACFRL131600MP) by Master Pneumatic®. Perfectly tailored for 750cfm - 1,600cfm Schmidt® AirPrep™ systems, including both MP160 filter/regulator and MP125 lubricator.
- 1/2" Filter/Regulator/Lubricator tailored for Schmidt® AirPrep™ systems ranging from 750cfm to 1,600cfm.
- Incorporates both MP160 filter/regulator and MP125 lubricator for comprehensive care.
- Quality assurance from the renowned Master Pneumatic® brand.
- Master Pneumatic® offers an extensive range of FRL combinations to cater to diverse applications.
- An essential add-on for maximizing the longevity and efficiency of your air systems.
ACFRL131600MPExperience enhanced air dryer performance with the 1/2" Filter/Regulator/Lubricator (SKU: ACFRL131600MP) by Master Pneumatic®. Perfectly tailored for 750cfm - 1,600cfm Schmidt® AirPrep™ systems, including both MP160 filter/regulator and MP125 lubricator.- 1/2" Filter/Regulator/Lubricator tailored for Schmidt® AirPrep™ systems ranging from 750cfm to 1,600cfm.
- Incorporates both MP160 filter/regulator and MP125 lubricator for comprehensive care.
- Quality assurance from the renowned Master Pneumatic® brand.
- Master Pneumatic® offers an extensive range of FRL combinations to cater to diverse applications.
- An essential add-on for maximizing the longevity and efficiency of your air systems.