Blasting, UHP & Site Equipment
Showing 406–420 of 600 results
-
- Multi-purpose inline ball valve
- Plated brass corrosion-resistant body
- Full bore design for maximum airflow
- Rated for use up to 600 psi
- Female NPT threaded ports
- Sold individually
-
GVFSV1022Heavy-duty pipe fitting connects flat sand valve to pusher line, blast hose line, and blast pot nipple. Specifications:
- 150# malleable iron wye
- 1-¼" x 1-¼" x 1-¼" standard NPT female threads
GVFSV1022Heavy-duty pipe fitting connects flat sand valve to pusher line, blast hose line, and blast pot nipple. Specifications:- 150# malleable iron wye
- 1-¼" x 1-¼" x 1-¼" standard NPT female threads
-
- For use with Nylon Coupling Series: PCG-1; PCG-2; PCG-3;
- Material: Double-lipped rubber
- Compatibility:
- PCG-1: 3/4″ ID and Smaller Blast Hose
- PCG-2: 1″ ID Blast Hose
- PCG-3: 1-1/4″ ID and Larger Blast Hose
- Sold as a pack of 10
-
BlastOne stocks the Axxiom replacement parts you need to keep your valves operating. These are the bottom base pipe nipples for the Thompson II metering valve:
- 1" x 1", MPN 2152-000-19
- 1-¼" x 1-¼", MPN 2152-000-15
- 1-½" x 1-½", MPN2152-000-11
-
GRD32977MB
- Suits 50 gallon and 275 gallon water tanks
- Air Operated, Double Diaphragm, Pneumatic Pump - used to Pump water from a water tank to a MistBlaster
- Allows you to have a mixing tank for HoldTite mixture with water when Mist or Vapor Blasting
- Max Working Pressure 100psi
- Free Flow delivery of 7.0 gallons per minute
- Maximum suction height is 12ft
- Air consumption is only 6scfm
- Pump comes complete with water fittings and air fittings
- Genuine Parts - Manufactured by Graco
GRD32977MB- Suits 50 gallon and 275 gallon water tanks
- Air Operated, Double Diaphragm, Pneumatic Pump - used to Pump water from a water tank to a MistBlaster
- Allows you to have a mixing tank for HoldTite mixture with water when Mist or Vapor Blasting
- Max Working Pressure 100psi
- Free Flow delivery of 7.0 gallons per minute
- Maximum suction height is 12ft
- Air consumption is only 6scfm
- Pump comes complete with water fittings and air fittings
- Genuine Parts - Manufactured by Graco
-
BA2497706
- Installed in the riser tube below the pop up valve of the blast pot
- Used to stop backflow of air into the control lines and valves
- Typically used when blasting with fine or dusty abrasives
- Suits 1" riser tubes
- User will need to reduce current riser tube height to make this fit.
- Allows maximum pressure fluctuation without back flow of dust and abrasive.
- Sold individually
- Genuine Parts - Manufactured by Axxiom Manufacturing/Schmidt
BA2497706- Installed in the riser tube below the pop up valve of the blast pot
- Used to stop backflow of air into the control lines and valves
- Typically used when blasting with fine or dusty abrasives
- Suits 1" riser tubes
- User will need to reduce current riser tube height to make this fit.
- Allows maximum pressure fluctuation without back flow of dust and abrasive.
- Sold individually
- Genuine Parts - Manufactured by Axxiom Manufacturing/Schmidt
-
BA840800079
- Essential Safety Item for Megablaster Pot closures
- Designed and installed on all Schmidt Bulk Pots since release in 2010
- Able to be retrofitted to Schmidt Bulk Pots in any of BlastOne Locations
- Ensures that correct operating procedures are followed when opening the fill port.
- Fits over camlock bolts and ensures all bolts remain in the lugs until all cams are fully disengaged, ensuring that the lid can not blow open
- Genuine Parts - Manufactured by Schmidt - Axxiom Manufacturing
BA840800079- Essential Safety Item for Megablaster Pot closures
- Designed and installed on all Schmidt Bulk Pots since release in 2010
- Able to be retrofitted to Schmidt Bulk Pots in any of BlastOne Locations
- Ensures that correct operating procedures are followed when opening the fill port.
- Fits over camlock bolts and ensures all bolts remain in the lugs until all cams are fully disengaged, ensuring that the lid can not blow open
- Genuine Parts - Manufactured by Schmidt - Axxiom Manufacturing
-
GV212800020
- 1-1/4" Heavy Duty Media Inlet Nipple with increased abrasion resistance
- Connects Metering Valve to Blast Pot
- Suits all Schmidt Abrasive Blast Pots, and any other vessel with a 1 1/4" NPT Metering Valve Ports
GV212800020- 1-1/4" Heavy Duty Media Inlet Nipple with increased abrasion resistance
- Connects Metering Valve to Blast Pot
- Suits all Schmidt Abrasive Blast Pots, and any other vessel with a 1 1/4" NPT Metering Valve Ports
-
BABL9610HD
- Suits BABL9610 BRICK LED Blast Light
- Dome White Light Diffuser
- Pulls the Bricks light in and disperses it over a larger area to spread the light
- Sold Individually
- Genuine Part – Manufactured by Western Technology
BABL9610HD- Suits BABL9610 BRICK LED Blast Light
- Dome White Light Diffuser
- Pulls the Bricks light in and disperses it over a larger area to spread the light
- Sold Individually
- Genuine Part – Manufactured by Western Technology