My Account
Blasting, UHP & Site Equipment
Showing 391–405 of 600 results
-
- Use with 1/2" to 1-1/2" nut & tail hose couplings
- General purpose double bolt hose clamps
- Two bolt, split-collar clamp without claw
- Sold individually
-
BADSEAL125
- Suits BlastOne Vacuload 1 Drum lid
- Used to seal the drum lid to the 55 gallon drum to maintain a good vacuum seal
- 1 1/4" x 1 1/8" D Gasket, with 3M Tape for easy adhesion
- Vacuload 1 Drum requires 8ft of the D-Seal
- Sold by the foot
BADSEAL125- Suits BlastOne Vacuload 1 Drum lid
- Used to seal the drum lid to the 55 gallon drum to maintain a good vacuum seal
- 1 1/4" x 1 1/8" D Gasket, with 3M Tape for easy adhesion
- Vacuload 1 Drum requires 8ft of the D-Seal
- Sold by the foot
Part Number Purchase Price BADSEAL125 $3.75 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$3.75
-
-
DCDC20E
- Suits 20" Flexible Dust Collector Ducting
- Duct Clamp is used to quickly join Ducts to the Dust Collector or a duct joining ring
- Quick action type
- Sold Individually
DCDC20E- Suits 20" Flexible Dust Collector Ducting
- Duct Clamp is used to quickly join Ducts to the Dust Collector or a duct joining ring
- Quick action type
- Sold Individually
-
DCDJ20
- Suits 20" Flexible Dust Collector Ducting
- Duct Joiner is used to join Two Dust Collector Ducts into a longer length
- Uses a Duct Joiner clamp to ensure the ducts stay together
- Sold Individually
DCDJ20- Suits 20" Flexible Dust Collector Ducting
- Duct Joiner is used to join Two Dust Collector Ducts into a longer length
- Uses a Duct Joiner clamp to ensure the ducts stay together
- Sold Individually
-
BlastOne offers a selection of popular replacement Filter Cartridges for most dust collectors. Additional details as follows:
- Suits Mobile Dust Collector Units, Blast Room Dust Collectors and Cabinet Dust Collectors
- Multiple media types available
- 100% cellulose. (aka Cellulex®). General purpose application. Merv 10 rated.
- 80/20 cellulose/poly. (aka Endura-Tek™). General purpose filtration with increased resistance to moist air. Merv 10.
- Spunbond. This 100% polyester media is highly resistant to moisture, but offers somewhat less filtration efficiency. Good in applications where the moisture in the pulse air supply is elevated.
- Media treatments available:
- Nano. (aka UltraWeb). This high performance wrap over any media is used when extra filtration efficiency is required. The longer life it provides (in addition to the better filtration) often pays for itself in fewer filter changeouts.
- Flame Resistance. FR treatment is available for most filter types.
Many more cartridge filter types available - see cross reference chart under the Documents tab. If you don't see what you need, chat or call 1-800-999-1881 with your questions. Note: Brand of product may vary.
-
Many time-saving Vac Hose Fittings are available. This group includes:
- Vac Hose Wyes, join 2 smaller hoses to 1 larger hose
- Vac Hose Splitters, join 3 or 4 smaller hoses to 1 larger hose
- Easy to install and remove for hassle-free maintenance
- Made from durable carbon steel
-
Many time-saving Vac Hose Fittings are available. This group includes:
- Barbed & smooth Vac Hose Menders
- Reducing Joiners, to transition larger hose to smaller one
- Suitable for repairing or joining hoses
- Connect same size hoses or adapt different sizes together
- Easy to install and remove for hassle-free maintenance
- Available in multiple types, including carbon steel and zinc-plated steel.
-
Industrial Vacuums are powerful! So much so that if your arm gets sucked into the hose, it can cause substantial bodily harm. Vac Hose Safety Inlets are designed to keep the operator safe. Don't wait until you have an incident - equip your vacuum hoses with these simple, yet effective inlets.
- Protect your operator with the Vacuum Safety Inlet Sleeve
- Fits onto the inlet of your vacuum hose to reduce accidents involving operator clothing / limbs
- Durable construction resists wear and tear for long-lasting protection
-
Many time-saving Vac Hose Fittings are available. This group includes:
- Combination Nipples, to connect vacuum equipment to vacuum hose
- Barbed hose tail on one end, male thread on the other
- Made from zinc-plated steel (other types available)
- Easy to install and remove for hassle-free maintenance
- Single Sizes and Jump Sizes Available
-
VCBV023
- Suits VCBV200 Blast and Vac Workhead
- Blast and Vacuum Central Wear Liner
- Used to prevent premature wear to the workhead
- Sold Individually
VCBV023- Suits VCBV200 Blast and Vac Workhead
- Blast and Vacuum Central Wear Liner
- Used to prevent premature wear to the workhead
- Sold Individually
-
DM2013402
- Replacement part for the Control Line Pilot Valve
- Reduces wear on both the remote control exhaust valve and the abrasive metering valve.
- Provides sharp, clean and rapid deadman response.
DM2013402- Replacement part for the Control Line Pilot Valve
- Reduces wear on both the remote control exhaust valve and the abrasive metering valve.
- Provides sharp, clean and rapid deadman response.
-
- Used for short-term dust collection
- After 1 days use, they need to be washed and dried
- Fabric usually clogs after 4-6 hours
- After 1 days use, they need to be washed and dried
- Fits many portable dust extraction fans
- NOTE - Not recommended for Black Max electric fans larger than 16"
- Used for sandblasting dust control
- Nuisance, non-toxic, non-hazardous dust
- Ideal for short-term abrasive blasting projects
- Made from 100% cotton
- Includes zipper access for cleaning out loose dust before washing (not applicable to DCBMX2100)
- Breathable for air filtration
- High volume air flow design
- Tapered necks for easy attachment to extraction fans
- Quick to set-up and pull-down
- Recommended purchasing in quantities of 10
- Used for short-term dust collection
-
DCBMX4AMNRV92
- Suits Black Max Fan (P-DCBMX)
- 1.8 HP
- 78cfm
- 3,000rpm
- Genuine GAST® part # 4AM-NRV-92
DCBMX4AMNRV92- Suits Black Max Fan (P-DCBMX)
- 1.8 HP
- 78cfm
- 3,000rpm
- Genuine GAST® part # 4AM-NRV-92
Part Number Purchase Price DCBMX4AMNRV92 $347.55 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$347.55
-
-
DM222910099
- Suits Electric Blast Pot Control Valve DM2229100
- Service Kit is used to keep your blast pot operational
- Sold as a Kit containing;
- Piston
- Spring
- Replacement O-rings
- Face Seal
- Genuine Parts - Manufactured by Schmidt / Axxiom Manufacturing
DM222910099- Suits Electric Blast Pot Control Valve DM2229100
- Service Kit is used to keep your blast pot operational
- Sold as a Kit containing;
- Piston
- Spring
- Replacement O-rings
- Face Seal
- Genuine Parts - Manufactured by Schmidt / Axxiom Manufacturing
Part Number Purchase Price DM222910099 $73.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$73.00
-
-
DM226340420BlastOne has the parts needed for your MiniBRS G2 Trigger Workheads. This is the Electric Trigger Module Assembly (2263-404-20). A Pneumatic G2 Trigger Deadman control module is also available.DM226340420BlastOne has the parts needed for your MiniBRS G2 Trigger Workheads. This is the Electric Trigger Module Assembly (2263-404-20). A Pneumatic G2 Trigger Deadman control module is also available.
Part Number Purchase Price DM226340420 $333.00 Replacement Control Module for G2 Electric Pistol-Grip BRS Workhead
Part #DM226340420
View Product DetailsWeb price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$333.00
-
