My Account
Blasting, UHP & Site Equipment
Blast Equipment
Blast Nozzles
Blast Equipment Parts
Blast / Air Hose & Couplings
Portable Lighting
Air Dryers
Ventilation & Other Field Equipment
UHP & Pressure Washing Equipment
Showing 316–330 of 604 results
-
- Pressure-release deadman control valve i.e., blast machine depressurizes when the deadman handle is released.
- Used when an overhead hopper automatically feeds abrasive into a blast machine.
- Rugged stainless steel body, compact, isolated 2-bolt construction.
- Doubles blast machine refill cycle time.
- Virtual Position Indicator illustrates orifice size, giving the ability to set abrasive flow quickly and consistently.
- Set and forget – flow rates stay set where you put them.
- High wear, rugged plunger seal.
- Stainless steel body for long life.
- Improved urethane clean-out port enabling quick removal of obstructions while improving port and valve life.
- Fit a rebuild kit while the valve is still fitted to the blast machine.
- Sold individually.
- Genuine Products – Manufactured by Schmidt / Axxiom Manufacturing
-
Schmidt changed the abrasive blasting industry when they introduced the MicroValve™. Now known as the MicroValve I (or the Original Microvalve), it is still available although most pressure-release Schmidt pots now use the newer MicroValve III®. It features:
- Simple threaded screw-type metering
- Hardened steel threaded base nipple
- (The brass threaded coupling shown is available separately.)
- Genuine Products - Manufactured by Schmidt® / Axxiom Manufacturing
-
- Thompson Metering Valve II lasts up to 10 times longer than any other valve, due to its unique engineering
- Designed to handle the harshest blasting environments known
- Will handle up to a 3/4" blast nozzle
- Will work with any abrasive, including very fine/dusty abrasives
- Most rugged and reliable valve for any application
- Sold Individually
- Genuine Parts - Made in USA by Schmidt / Axxiom Manufacturing
-
The Thompson I Valve was invented by Bob Schmidt and was instrumental in causing the popularity of pressure hold technology.
- Pressure-hold systems retain the pressure in the blast pot until the deadman handle is depressed. This reduces abrasive and energy waste.
- The Thompson I offers fine control for abrasive metering
- It comes in 3 nipple size configurations:
- 1 ¼” (32 mm) x 1 ¼” (32 mm)
- 1 ½" (38 mm) x 1 ½" (38 mm)
- 2" (50 mm) x 2" (50 mm)
- Threaded-plunger metering design with air actuated operation
- Fits most sand blast hoppers, blast pots or abrasive blasting machines
- Genuine Parts - Manufactured by Schmidt® / Axxiom Manufacturing
-
GV02427
- The Flat Sand Valve is the classic Clemco abrasive metering valve used for sandblasting for nearly 100 years.
- Used in most new Classic blast machine pots
- The FSV is simple and economical and provides abrasive metering control for expendable mineral abrasives and slags (not recommended for steel grit or aluminum oxide).
- The valve uses a simple lever and keyslot to control the flow of abrasive from the blast pot into the blast hose
- It is good practice to keep a complete spare valve on hand to use when needed, repairing the worn valve at a convenient later time.
- Genuine Clemco Part Number 02427
GV02427- The Flat Sand Valve is the classic Clemco abrasive metering valve used for sandblasting for nearly 100 years.
- Used in most new Classic blast machine pots
- The FSV is simple and economical and provides abrasive metering control for expendable mineral abrasives and slags (not recommended for steel grit or aluminum oxide).
- The valve uses a simple lever and keyslot to control the flow of abrasive from the blast pot into the blast hose
- It is good practice to keep a complete spare valve on hand to use when needed, repairing the worn valve at a convenient later time.
- Genuine Clemco Part Number 02427
-
The Flat Sand Valve is legacy metering technology, where the metering is performed by sliding a lever to open and close the abrasive port. It is simple in design and relatively inexpensive, but has a few limitations. Details as follows:
- Slide-plate metering design, controlled by lever
- 1 1/4" (32 mm) ports
- Features side cleanout-inspection port
- Available with or without outlet nipple and Y-piece (Optional rubber lined nipple is available to extend nipple life.)
- The major limitations are:
- Not recommended for use with metallic abrasives
- The slide plate/lever design does not provide effective fine metering control. Typically this results in over consumption of media. For low-volume blasting using inexpensive media, this may not be an issue.
-
GVDNV100
- HFSTC3 blast coupling included
- Designed for use with coarse metallic abrasives
- Heavy cast iron construction
- Not recommended for use with fine abrasives
- 1 1/2" NPT female thread air connection
- Recommended upgrade: MicroValve 3
GVDNV100- HFSTC3 blast coupling included
- Designed for use with coarse metallic abrasives
- Heavy cast iron construction
- Not recommended for use with fine abrasives
- 1 1/2" NPT female thread air connection
- Recommended upgrade: MicroValve 3
-
SBMGP
- Pre-engineered to minimize costs and ensure quick set up
- Typical max part size (to be blasted): 5’ x 3’ x 8’ (W x H x L)
- Blasting chamber with set of double-doors
- Dust tight, high-powered LED lights in ceiling
- Shovel-in hopper, elevator and air classifier for basic abrasive recovery/recycling
- Includes abrasive storage hopper and high-performance sandblasting machine
- Separate personnel side access door (optional)
SBMGP- Pre-engineered to minimize costs and ensure quick set up
- Typical max part size (to be blasted): 5’ x 3’ x 8’ (W x H x L)
- Blasting chamber with set of double-doors
- Dust tight, high-powered LED lights in ceiling
- Shovel-in hopper, elevator and air classifier for basic abrasive recovery/recycling
- Includes abrasive storage hopper and high-performance sandblasting machine
- Separate personnel side access door (optional)
Part Number Purchase Price SBMGP Request Quote Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.Request Quote
-
-
Have a good pot that you hate to throw away? The TeraValve™ Complete Blast Pot Retrofit Kit allows you to obtain state-of-the-art pressure-hold abrasive metering technology and save money in the process! Details as follows:
- Your existing pot must be structurally sound and must have at least 6 inches clearance below it.
- The retrofit kit includes a new TeraValve™ as well as all other valves, piping, deadman handle/controls, and hoses required for a complete upgrade.
- Note: Handway and pop-up components are available separately, if needed. In addition, you may want to consider the optional VBS II muffler and/or a union-end ball valve / quick connect (if you have the necessary clearance). See Related Products below.
- Retrofit kits are available in either pneumatic or electric and are offered in both 1-¼" and 1-½" valve sizes.
- Installation instructions are included in the box (and under the Documents tab here). If installation assistance is needed, call us for friendly tech support via phone or we can arrange to have our technicians perform the installation for you.
-
SBMGI
- High quality, acoustically insulated steel sandwich panel construction
- Ideal for consistent blasting production (1 operator, 20-40 hrs/week)
- Various material handling options: product carts, forklift loading, manual handling
- Partial or Full-floor abrasive recovery system
- Airwash abrasive cleaner for grit recycling with vibrating screen for trash removal
- Reverse pulse cartridge dust collector
- Typical size ranging from:
- 10’ W x 10’ H x 10’ L (small)
- 22’ W x 22’ H x 100’ L (large)
SBMGI- High quality, acoustically insulated steel sandwich panel construction
- Ideal for consistent blasting production (1 operator, 20-40 hrs/week)
- Various material handling options: product carts, forklift loading, manual handling
- Partial or Full-floor abrasive recovery system
- Airwash abrasive cleaner for grit recycling with vibrating screen for trash removal
- Reverse pulse cartridge dust collector
- Typical size ranging from:
- 10’ W x 10’ H x 10’ L (small)
- 22’ W x 22’ H x 100’ L (large)
Part Number Purchase Price SBMGI Request Quote Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.Request Quote
-
-
SBMGSHeavy Duty Blast Room can be designed for use with any steel or heavy machinery manufacturers, refinishing facilities, for oil and gas components, or in job shops. The "General Purpose Custom Engineered Blast Rooms and Facilities" (SKU: SBMGS) are heavy-duty, long-term sandblasting solutions. Designed for diverse industrial needs, these rooms feature robust steel panels, advanced abrasive recovery systems, and extensive customizability. Ideal for consistent operations seeking a controlled blasting environment.SBMGSHeavy Duty Blast Room can be designed for use with any steel or heavy machinery manufacturers, refinishing facilities, for oil and gas components, or in job shops. The "General Purpose Custom Engineered Blast Rooms and Facilities" (SKU: SBMGS) are heavy-duty, long-term sandblasting solutions. Designed for diverse industrial needs, these rooms feature robust steel panels, advanced abrasive recovery systems, and extensive customizability. Ideal for consistent operations seeking a controlled blasting environment.
Part Number Purchase Price SBMGS Request Quote Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.Request Quote
-
-
SBMGRDesigned to improve throughput and lower operating costs in Railcar Facilities, these Blast Rooms are suitable to railcar relining, refurb, or new build.SBMGRDesigned to improve throughput and lower operating costs in Railcar Facilities, these Blast Rooms are suitable to railcar relining, refurb, or new build.
Part Number Purchase Price SBMGR Request Quote Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.Request Quote
-
-
SBMGWThese blast rooms are designed to improve flow in a Wind Tower manufacturing facility, and can be made to handle both internal and exterior blast, with nearly any level of automation.SBMGWThese blast rooms are designed to improve flow in a Wind Tower manufacturing facility, and can be made to handle both internal and exterior blast, with nearly any level of automation.
Part Number Purchase Price SBMGW Request Quote Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.Request Quote
-
-
SBMGZ
- Custom designed blasting and painting facilities, sized as large as application requires
- Ideal for new construction and repair, for vessels of all type and size
- Available configurations:
- Hybrid blast/paint hall - single hall for both operations at different times
- 2 separate halls - each single-purpose hall dedicated to blasting or painting
- Available with completely controllable environmental conditions to meet required specifications
- Compatible with abrasive recovery and recycling equipment with many available configurations
SBMGZ- Custom designed blasting and painting facilities, sized as large as application requires
- Ideal for new construction and repair, for vessels of all type and size
- Available configurations:
- Hybrid blast/paint hall - single hall for both operations at different times
- 2 separate halls - each single-purpose hall dedicated to blasting or painting
- Available with completely controllable environmental conditions to meet required specifications
- Compatible with abrasive recovery and recycling equipment with many available configurations
Part Number Purchase Price SBMGZ Request Quote Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.Request Quote
-
-
SBMGT
- Permanent or temporary mounting systems
- Ideal for setting up temporary blasting/painting facilities
- Supplied in modular kit for simple, quick installation (under a week)
- Fully relocatable — easy to install and dismantle
- 100% Waterproof design
- Wind rating as per local requirements
- No concrete foundation necessary
- Compatible with optional abrasive recovery and dust collection equipment
SBMGT- Permanent or temporary mounting systems
- Ideal for setting up temporary blasting/painting facilities
- Supplied in modular kit for simple, quick installation (under a week)
- Fully relocatable — easy to install and dismantle
- 100% Waterproof design
- Wind rating as per local requirements
- No concrete foundation necessary
- Compatible with optional abrasive recovery and dust collection equipment
Part Number Purchase Price SBMGT Request Quote Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.Request Quote
-
Our Blasting & UHP Site Equipment category offers everything you need for efficient and effective surface preparation. For abrasive blasting, we supply a variety of blasting pots, nozzles, and blast hoses that ensure consistent media flow and superior performance. If you’re working with ultra-high-pressure water blasting, our UHP pumps and water jetting accessories are engineered for maximum power and precision, making them ideal for removing coatings, rust, and other heavy contaminants. Whether you’re tackling a large industrial project or a specialized cleaning job, our equipment is designed to meet the highest standards of safety and efficiency. Need assistance? Our team is here to provide expert guidance on selecting the best tools for your needs.
