My Account
Blasting, UHP & Site Equipment
Blast Equipment
Blast Nozzles
Blast Equipment Parts
Blast / Air Hose & Couplings
Portable Lighting
Air Dryers
Ventilation & Other Field Equipment
UHP & Pressure Washing Equipment
Showing 286–300 of 604 results
-
Ensure safety with the Safety Whipcheck for Hose Connections. Designed for hoses from ½" to 3½", these steel-constructed whipchecks restrain hoses during unexpected disconnections.
- Use of a safety whipcheck restraint is mandatory on all hoses
- Whip checks are of steel construction
- HF SCA-1 small safety cable - 28" long
- For use on blast hoses (½" to 2 ½") OD
- HF SCA-2 large safety cable - 38" long
- For use on blast and bull air hoses (1-1/2" to 3½") OD
- Whip Checks restrains hoses in the event of a failure or accidental disconnection
-
BAHNGKit
The “Blast Nozzle Pressure Test Kit” (SKU: BAHNGKit) by BlastOne ensures quick and accurate nozzle pressure testing. Comes complete with a stainless steel pressure gage, needles, and a protective leather-bound case.
- For testing air pressure at the nozzle
- Uses hyperdermic needles which insert into the blast hose to take the nozzle pressure
- Insert about 6-10ft behind blaster for most accurate reading
- Test kit includes:
- Liquid filled stainless steel pressure gage with dual pressure & efficiency scale
- Four needles and instructions
- Protective leather bound case
- Sold as a Kit
- MPN 2010-014-03
Note - there is no calibration certificate process available for this item.
BAHNGKitThe “Blast Nozzle Pressure Test Kit” (SKU: BAHNGKit) by BlastOne ensures quick and accurate nozzle pressure testing. Comes complete with a stainless steel pressure gage, needles, and a protective leather-bound case.
- For testing air pressure at the nozzle
- Uses hyperdermic needles which insert into the blast hose to take the nozzle pressure
- Insert about 6-10ft behind blaster for most accurate reading
- Test kit includes:
- Liquid filled stainless steel pressure gage with dual pressure & efficiency scale
- Four needles and instructions
- Protective leather bound case
- Sold as a Kit
- MPN 2010-014-03
Note - there is no calibration certificate process available for this item.
-
Nozzle holder for blast hose
- Couples the blast nozzle to the blast hose
- Choose your blast nozzle thread type;
- 3/4" Medium (aka Mitey-Mite) Thread
- 1-1/4" Industrial Fine Thread
- 2" Coarse/Contractor Thread *Contractor Favorite*
- Available in Nylon, Brass or Aluminum
- Click the Documents tab below to view full selection
- Industry Commonly Referred to As: HE1, HE-1, HE2, HE-2, HE3, HE-3, NHP1, NHP2, NHP3, NH1, NH-1, NH2, NH-2, NH3, NH-3
-
OTK Crimp Hose Clamps (SKU: P-OTKCHC) offer a reliable solution to attach and seal hoses onto various fittings, such as barbs or nipples. Crafted for precision, these clamps ensure a tight fit, reducing the risk of leaks. Whether you're working with a Twinline control hose or an AHB-10 breathing air hose, we've got the right size for you:
- For Twinline control hose: Use size 1113
- For AHB-10 breathing air hose: Use size 1518
-
- 2-claw threaded coupling for metering valve outlet, to enable connection of blast hose
- Supplied with HFGMRLP coupling gasket fitted
- For Aluminum, Brass, and Steel, use HFCLP1 thin safety lock pins - purchase separately
- Nylon is supplied with HFGPCG gasket fitted and contains an integral springlock pin
- 2 types available - Standard and MegaMax.
- Note: MegaMax and Standard couplings require an adapter to fit together.
- MegaMax couplings are Full-Flow, designed to remove the air restrictions caused by standard couplings, and increases the PSI available to the nozzle. The increased PSI is mostly beneficial when doing high-production blasting using 1.5" or 2" ID Blast Hoses.
- These are threaded couplings (threaded fittings) designed for metering valve outlets only. Unthreaded QC couplings are used on blast hoses, and can be found HERE.
- Note: 1 1/4" threaded couplings can also be used as Quick-couple type nozzle holders for fine thread nozzles.
- Industry Size Commonly Referred to as SB1, SB-1, SB2, SB-2
-
The 4-Claw Fittings (aka Crowsfoot Couplings) provides a reliable and quick connection for MegaFlow Bull / Air Hoses in industrial applications. Built from plated steel, this coupling is rated for 150 psi and is designed for use with claw bolt clamps and HFCLP2 lock pins for enhanced safety. Each fitting is supplied with a rubber gasket. Quantity discounts available.
Key Product Features:
- 4-Claw (Crowsfoot) coupling for quick connections between bull hoses and equipment.
- Rated for 150 psi; not intended for steam use.
- Compatible with 1-1/4" through 2" ID bull hoses.
- Requires HFCLP2 lock pins and whipchecks to ensure secure connections.
- Durable steel construction for high-pressure industrial use.
- Replacement 4-claw gaskets and quantity discounts available.
-
- Heavy Duty Spud fitting assembly for MegaFlow Bull Air Hose
- Includes Hose Tail (aka Boss® Ground Joint Stem) and Boss® Wing Nut. A hammer is used on the wing nut to tighten it.
- Rugged plated steel construction
- Recommended by BlastOne as the preferred Bull hose fitting – safer than 4-claw
- Gasket-less, low maintenance design. No lock-pins required.
- Safety requires bull hose bolt clamps to secure to the air hose by a special installation procedure
- Sold Individually with quantity discounts available
- Genuine Parts – manufactured by Dixon
-
- Heavy Duty Spud Fittings for MegaFlow Bull / Air Hose to connect bull hose to equipment, or to connect two bull hoses
- Also known as Boss® Ground Joint Fittings, this selection is made of heavy plated Iron
- Recommended by BlastOne as the preferred Bull hose fitting as they are inherently safer than 4-claw fittings
- Sold Individually with Mix/Match quantity discounts available
- Genuine Parts - Manufactured by Dixon
-
- 30 Day Money Back Guarantee | Free Returns
- Industry standard coupling for use with air supply hose
- Rugged steel construction
- Quarter-turn quick action connector
- Supplied with 3/4" I.D. bore gaskets fitted
- Use HF CLP-1 or HF CLP-2 Lock Pin - (not included)
- Available with hose tail, male threads, or female threads
- Sold individually
-
General purpose air connection fittings
- This is the Reducing Bushing group
- Many sizes available
- Many materials available, including Stainless Steel, Brass, Galvanized Malleable Iron, and Iron
- 150 psi rated
-
MOBILE DUST COLLECTOR, AIR SCRUBBERS & PORTABLE DUST EXTRACTORS
- Ready availability all over the US
- Diesel powered
- Trailer mounted or skid mounted
- Industry leading design
- All sizes available
- Read our Dust Collector Buying Guide
- Portable dust extractor for site work
- Onsite dust collectors and onsite dust ventilation
- Industrial portable dust collectors
-
AVAILABLE FOR RENTAL OR PURCHASE
- Comes in 25 foot lengths
- Built with Heavy Duty Nylon with Extra Wear Strips
- Tough coated membrane wrapping
- Spiral reinforcing ribs for suction applications to ensure the Ducting doesn't collapse
- Collapses down for compact transportation and storage
- Can be used under negative or positive pressure
- Rated for temperatures from -20 to 180 degrees F
- Meets NFPA701 Method 2 Specs for Flame Resistance
-
- Modular, portable ventilating fans, available in a variety of sizes
- Electric, Pneumatic, and Hazardous Electric models available
- Set-up as a stand-alone or ducted unit.
- See attached document for CFM ratings
- NOTE - Dust Socks cannot be used on electric Black Max fans larger than 16". Using a 20 or 24" electric unit with a dust sock voids the warranty.
- DUST SOCK - Sold Separately - NOTE - see limitation above
- DUCT ADAPTER - Sold Separately
-
VCBV066
- Suits Blast and Vac Workhead VCBV100 (Wheeled Unit)
- Nozzle Internal Venturi 3/8" #6 Long Venturi
- Long Lasting
- Sold Individually
VCBV066- Suits Blast and Vac Workhead VCBV100 (Wheeled Unit)
- Nozzle Internal Venturi 3/8" #6 Long Venturi
- Long Lasting
- Sold Individually
-
VCBV006
- Suits VCBV100 and BNV-4/6
- Centre Tube Wear Liner
- Wears out instead of the body
- Sold Individually
VCBV006- Suits VCBV100 and BNV-4/6
- Centre Tube Wear Liner
- Wears out instead of the body
- Sold Individually
Our Blasting & UHP Site Equipment category offers everything you need for efficient and effective surface preparation. For abrasive blasting, we supply a variety of blasting pots, nozzles, and blast hoses that ensure consistent media flow and superior performance. If you’re working with ultra-high-pressure water blasting, our UHP pumps and water jetting accessories are engineered for maximum power and precision, making them ideal for removing coatings, rust, and other heavy contaminants. Whether you’re tackling a large industrial project or a specialized cleaning job, our equipment is designed to meet the highest standards of safety and efficiency. Need assistance? Our team is here to provide expert guidance on selecting the best tools for your needs.
