My Account
Blasting, UHP & Site Equipment
Blast Equipment
Blast Nozzles
Blast Equipment Parts
Blast / Air Hose & Couplings
Portable Lighting
Air Dryers
Ventilation & Other Field Equipment
UHP & Pressure Washing Equipment
Showing 241–255 of 629 results
-
- Nylon webbing whipchecks - easier to install, less damaging to hose and will provide a longer service life
- The use of a whip check restraint is mandatory on all hoses. If you have any questions about the best restraint to use, please contact us directly.
-
DM2263001
- Pneumatically operated via twinline hoses
- Compatible with all twinline pneumatic remote control systems
- 1/4" and 1/8" air supply threaded connectors
- Operate by pulling down the safety flap and hold the large handle down
DM2263001- Pneumatically operated via twinline hoses
- Compatible with all twinline pneumatic remote control systems
- 1/4" and 1/8" air supply threaded connectors
- Operate by pulling down the safety flap and hold the large handle down
-
When your G3 Trigger Deadman system needs refreshed, we have the replacement parts you need. These are the control modules - select the type you need from the options available shown here. Note: The Control Module includes the trigger. The complete G3 Deadman assembly is available here.
-
The Western Tech Sure-Fire Electric Remote Control Handle (aka Redhead deadman or ball-and-chain deadman) is a compact, hands-free electrically-operated deadman switch. Usable in all applications from 12 to 120v, it's designed for safe operation of blast nozzles, fueling applications, and more.
Key Features:
- Compact 'hands-free' design
- Ball and chain type (except model 1003) - operator must use as per instruction manual
- 12 or 24 Volt are the most common applications
- 2-wire is standard or 3-position toggle switch for use with integrated remote abrasive cut-off switch
Standard Configurations:
- Standard Ball & Chain Deadman, available as:
- Repairable or Sealed
- 2, 3, or 4 wire
- Trigger Deadman
- Sealed (only)
- NEMA 4 for wet or dry
- 2-wire, designed specifically for fueling
- Wrist-EZ
- Repairable
- 2 or 3 wire
- Ergonomic - reduces fatigue when blasting large projects
All Western Tech Deadmans are supplied with a 4' bare wire whip. Pre-fitted options with choice of wire length and plugs are optionally available, or order TwistLok plugs and/or control wire / cable separately.
-
The Auto Air Valve (aka Gatekeeper) is the recommended control valve for a pressure-hold blasting system. It is safer and superior to a pinch valve system. Further details as follows:
- Rugged, compact design
- Typically used in conjunction with the Thompson Valve
- Low pressure drop across valve – increases production
- Multiple sizes available.
- Retrofit systems are available to convert pinch valve / donut valve systems to safer and more efficient Auto Air valve systems - see options below.
-
DM227000003APKWhen your G3 Trigger Deadman system needs refreshed, we have the replacement parts you need. This is the trigger safety flap sub assembly, which includes the spring & pin, and comes 2 per pack.
- Safety flap subassembly requires positive trigger engagement by the operator, thereby preventing accidental blasting
- Heavy-duty construction for long-lasting use
- See the repair parts tab on the main BAABS page here for additional replacement parts.
DM227000003APKWhen your G3 Trigger Deadman system needs refreshed, we have the replacement parts you need. This is the trigger safety flap sub assembly, which includes the spring & pin, and comes 2 per pack.- Safety flap subassembly requires positive trigger engagement by the operator, thereby preventing accidental blasting
- Heavy-duty construction for long-lasting use
- See the repair parts tab on the main BAABS page here for additional replacement parts.
Part Number Purchase Price DM227000003APK $58.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$58.00
-
-
BA01972
BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement valve plug for the 1" piston type Outlet Valve (factory part number 01972).
BA01972BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement valve plug for the 1" piston type Outlet Valve (factory part number 01972).
-
The BAABS deadman assembly works on all sizes of blast hose. To facilitate the various hose diameters, a hose adapter set is required. Each adapter set includes 2 grippers (2 sets are used per BAABS) and is offered in the following sizes:
- M1, for HE1 nozzle holder (1" whip OR 3/4" 4-ply hose)
- M2, for HE2 nozzle holder (1-1/4" whip OR 1" 4-ply hose)
- M3, for HE3 nozzle holder (1-1/2" whip OR 1-1/4" 4-ply hose)
- M4, for HE4 nozzle holder (1-1/2" 4-ply hose)
-
When your BAABS Deadman system needs refreshed, we have the replacement parts you need. This is the Rail Base Sub-Assembly group, and comes in the sizes to match complete BAABS units. Individual repair parts are also available under the Repair Parts tab.
- Easy installation
- Secure and stable base for deadman switch
- Designed for use with multiple blasting accessories
- Durable and long-lasting construction
Note: BAABS hose grippers are not included in these, but are readily available separately.
-
DMBB450000005PKWhen your BAABS Deadman system needs refreshed, we have the replacement parts you need. This is a 3-pack of the Locking Knob w/bolt. Other individual components are also available. See the Repair Parts tab on the main BAABS page here.DMBB450000005PKWhen your BAABS Deadman system needs refreshed, we have the replacement parts you need. This is a 3-pack of the Locking Knob w/bolt. Other individual components are also available. See the Repair Parts tab on the main BAABS page here.
Part Number Purchase Price DMBB450000005PK $68.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$68.00
-
-
DMRMCVIAKBlastOne has the parts to maintain your Clemco® blast equipment. This is the rebuild kit for the 1" inlet valve (replaces factory part number 01929). Includes the following:
- BA01969 Plug Washers (2)
- BA01982 Compression Spring, small
- BA01986 Plug Washer Retainer
- BA01989 Bottom Cap Seal
- BA01990 O-Ring, Medium
- BA01992 O-Ring, Small
DMRMCVIAKBlastOne has the parts to maintain your Clemco® blast equipment. This is the rebuild kit for the 1" inlet valve (replaces factory part number 01929). Includes the following:- BA01969 Plug Washers (2)
- BA01982 Compression Spring, small
- BA01986 Plug Washer Retainer
- BA01989 Bottom Cap Seal
- BA01990 O-Ring, Medium
- BA01992 O-Ring, Small
-
BA02013BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement O-ring set for 1" abrasive trap (factory part number 02013).BA02013BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement O-ring set for 1" abrasive trap (factory part number 02013).
-
BA01974
BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement compression spring for the 1" Piston Type outlet valve (factory part number 01974).
BA01974BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement compression spring for the 1" Piston Type outlet valve (factory part number 01974).
-
BA02000BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement compression spring for the remote control valve (factory part number 02000).BA02000BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement compression spring for the remote control valve (factory part number 02000).
-
BA01986BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement plug washer retainer for the remote control valve (factory part number 01986).BA01986BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement plug washer retainer for the remote control valve (factory part number 01986).
Our Blasting & UHP Site Equipment category offers everything you need for efficient and effective surface preparation. For abrasive blasting, we supply a variety of blasting pots, nozzles, and blast hoses that ensure consistent media flow and superior performance. If you’re working with ultra-high-pressure water blasting, our UHP pumps and water jetting accessories are engineered for maximum power and precision, making them ideal for removing coatings, rust, and other heavy contaminants. Whether you’re tackling a large industrial project or a specialized cleaning job, our equipment is designed to meet the highest standards of safety and efficiency. Need assistance? Our team is here to provide expert guidance on selecting the best tools for your needs.
