Blasting, UHP & Site Equipment
Showing 241–255 of 600 results
-
RUBVDV400RENT or PURCHASE this surface preparation work-horse! The next-generation V400 Ultra High Pressure VertiDrive. Bringing enhanced technology to closed-loop UHP projects.
- Faster. V400 robotic technology is up to 5X faster than manual work.
- Cleaner. The rust, coatings, and contaminants are removed and returned to the vacuum via the closed-circuit system.
- Safer. Remote control operation removes the operator from harms way.
- Capable. Boosted magnetic performance allows standard operation on carbon steel surfaces that are horizontal, vertical, and even upside-down!
- Environmentally friendly. Contaminants don't just fall to the surface or blow away in the wind. The V400 brings them back to the vacuum source for responsible disposal.
- Productive. Has an extra-wide 15.5" (400 mm) cleaning width
RUBVDV400RENT or PURCHASE this surface preparation work-horse! The next-generation V400 Ultra High Pressure VertiDrive. Bringing enhanced technology to closed-loop UHP projects.- Faster. V400 robotic technology is up to 5X faster than manual work.
- Cleaner. The rust, coatings, and contaminants are removed and returned to the vacuum via the closed-circuit system.
- Safer. Remote control operation removes the operator from harms way.
- Capable. Boosted magnetic performance allows standard operation on carbon steel surfaces that are horizontal, vertical, and even upside-down!
- Environmentally friendly. Contaminants don't just fall to the surface or blow away in the wind. The V400 brings them back to the vacuum source for responsible disposal.
- Productive. Has an extra-wide 15.5" (400 mm) cleaning width
-
IPRIPTBFOR RENTAL OR PURCHASE
- Ideal for blasting penstocks, tunnels, pipelines, wind towers, etc.
- Offers full 360 degree coverage of pipe internals
- Self-propelled forward or reverse motion
- Can blast pipelines 3' - 32' in diameter
- Lowers labor costs as much as 75% compared with manual blast-pot operations
- Eliminates inconsistencies commonly found with manual blasting
IPRIPTBFOR RENTAL OR PURCHASE- Ideal for blasting penstocks, tunnels, pipelines, wind towers, etc.
- Offers full 360 degree coverage of pipe internals
- Self-propelled forward or reverse motion
- Can blast pipelines 3' - 32' in diameter
- Lowers labor costs as much as 75% compared with manual blast-pot operations
- Eliminates inconsistencies commonly found with manual blasting
-
VCBRS35FREE Shipping 30 Day Money-Back Guarantee | Free Returns 90 Day Manufacturer Warranty
- Abrasive holding capacity of 3.5 cu ft
- Blasting rate up to 40 ft2 per hour
- Compressed Air Requirement 750 cfm
- Includes fork pockets
- Can be wheel mounted for increased jobsite maneuverability
- Recirculating full size blast & recovery unit
- 100% compressed air driven - no electricity required
VCBRS35FREE Shipping 30 Day Money-Back Guarantee | Free Returns 90 Day Manufacturer Warranty- Abrasive holding capacity of 3.5 cu ft
- Blasting rate up to 40 ft2 per hour
- Compressed Air Requirement 750 cfm
- Includes fork pockets
- Can be wheel mounted for increased jobsite maneuverability
- Recirculating full size blast & recovery unit
- 100% compressed air driven - no electricity required
-
VaVacuload1PAVAILABLE FOR RENTAL OR PURCHASE
-
- FREE Shipping
- 30 Day Money-Back Guarantee | Free Returns
- Will vacuum upto 2 ton/hour
- Requires 350 cfm compressed air at 120 psi
- 1 Dust Collector Cartridge with filtration area of 229 sq ft.
- Automatic Reverse Pulse Cleaning
- Use with 3" vacuum hose
VaVacuload1PAVAILABLE FOR RENTAL OR PURCHASE-
- FREE Shipping
- 30 Day Money-Back Guarantee | Free Returns
- Will vacuum upto 2 ton/hour
- Requires 350 cfm compressed air at 120 psi
- 1 Dust Collector Cartridge with filtration area of 229 sq ft.
- Automatic Reverse Pulse Cleaning
- Use with 3" vacuum hose
-
-
VCBRSMP46FREE Shipping 30 Day Money-Back Guarantee | Free Returns 90 Day Manufacturer Warranty
- Blasting rate up to 20 ft2 per hour. Due to this low production rate, this unit is intended for specialty applications, such as spot-work in dust-sensitive areas.
- Utilizes the TeraValve XL abrasive metering valve
- Compressed Air Requirement is only 185 cfm
- Has wheels and fork pockets for easy portability by hand, or by forklift.
- 100% compressed air powered - no electricity required
- Various workheads are available for flat surfaces, inside corners, outside corners, etc. - enquire for details.
- Genuine Products - Manufactured by Schmidt / Axxiom Manufacturing
VCBRSMP46FREE Shipping 30 Day Money-Back Guarantee | Free Returns 90 Day Manufacturer Warranty- Blasting rate up to 20 ft2 per hour. Due to this low production rate, this unit is intended for specialty applications, such as spot-work in dust-sensitive areas.
- Utilizes the TeraValve XL abrasive metering valve
- Compressed Air Requirement is only 185 cfm
- Has wheels and fork pockets for easy portability by hand, or by forklift.
- 100% compressed air powered - no electricity required
- Various workheads are available for flat surfaces, inside corners, outside corners, etc. - enquire for details.
- Genuine Products - Manufactured by Schmidt / Axxiom Manufacturing
-
IPC1200
- Fits to IPC1000 as one assembly (outlined in red in image)
- Suitable for pipes between 8" and 36" in diameter
- Consists of 2 collars, 3 two-wheel roller bars and 4 sets of centering legs (6 legs per set)
IPC1200- Fits to IPC1000 as one assembly (outlined in red in image)
- Suitable for pipes between 8" and 36" in diameter
- Consists of 2 collars, 3 two-wheel roller bars and 4 sets of centering legs (6 legs per set)
-
HT3202404T
-
-
- FREE Shipping
- 30 Day Money-Back Guarantee | Free Returns
- 8" cutting width
- Easy to use, maintain and maneuver
- Precise screw type scaling head adjustment
- Angled dust port allows connection of industrial dust collector giving virtually dust free performance
- Supplied complete & ready to work with cutter head
- Updated version with improved electrics and start switch
-
HT3202404T-
-
- FREE Shipping
- 30 Day Money-Back Guarantee | Free Returns
- 8" cutting width
- Easy to use, maintain and maneuver
- Precise screw type scaling head adjustment
- Angled dust port allows connection of industrial dust collector giving virtually dust free performance
- Supplied complete & ready to work with cutter head
- Updated version with improved electrics and start switch
-
-
-
IPC3100
- Easy setup
- Tungsten carbide deflection head and throat nozzle
- For pipes 3/4" to 2" ID
- Includes 'hex collar' centering carriage set
- Requires 120 CFM air supply
- Adapts to customer supplied length of 3/8" threaded lance
- Compatible with standard blast machines
IPC3100- Easy setup
- Tungsten carbide deflection head and throat nozzle
- For pipes 3/4" to 2" ID
- Includes 'hex collar' centering carriage set
- Requires 120 CFM air supply
- Adapts to customer supplied length of 3/8" threaded lance
- Compatible with standard blast machines
-
BABL9610AF
- Suits BABL9610 BRICK LED Blast Light
- A-Frame Mount for Brick LED Blast Light
- Great for as a floor stand for lighting inside an enclosed area
- Sold Individually
- Genuine Part – Manufactured by Western Technology
BABL9610AF- Suits BABL9610 BRICK LED Blast Light
- A-Frame Mount for Brick LED Blast Light
- Great for as a floor stand for lighting inside an enclosed area
- Sold Individually
- Genuine Part – Manufactured by Western Technology
-
A junior version of the mighty Brick® light, the BRICKette® from Western Technology has the same rugged build, but with in a smaller package with about 2500 lumens. Highly Portable and with an Explosion Proof lamp head, it can be provided with either a more economical ordinary location power box, or as a completely explosion proof unit.
The Brickette comes standard with a slotted, non-magnetic handle. Optional magnetic handle/mounts are available where convenient, repositionable mounting on steel is desireable - see You May Also Like below.
-
DMAAVSR12
- Suits MistBlaster
- Used to control the water flow to the nozzle, via the injector block
- Air Actuated 2-Way Valve
- SS T-Port Ball Valve 1/2", Spring Return
- Mist Blaster requires 2 Valves
- Sold Individually
DMAAVSR12- Suits MistBlaster
- Used to control the water flow to the nozzle, via the injector block
- Air Actuated 2-Way Valve
- SS T-Port Ball Valve 1/2", Spring Return
- Mist Blaster requires 2 Valves
- Sold Individually