Blasting, UHP & Site Equipment
Showing 226–240 of 621 results
-
Junction Box assemblies include the deadman controls for Bulk pots, and are required when retrofitting an old pot with new valves. Available in 2 and 4 outlet configurations.
-
IPC1003
- Replacement brake housing for RotorBlast Internal Pipe Blasting Tool
IPC1003- Replacement brake housing for RotorBlast Internal Pipe Blasting Tool
-
IPC1015
- Replacement rear end plate for RotorBlast Internal Pipe Blasting Tool
IPC1015- Replacement rear end plate for RotorBlast Internal Pipe Blasting Tool
-
FPSP25
- FPSP25, RB-2 Replacement 1" Threaded Plug
- For IPC1000 RotorBlast
- (Replaces part number IPC1001)
- Note: 4 of these are included in Spare Parts Kit, IPC1099
FPSP25- FPSP25, RB-2 Replacement 1" Threaded Plug
- For IPC1000 RotorBlast
- (Replaces part number IPC1001)
- Note: 4 of these are included in Spare Parts Kit, IPC1099
-
-
DMMEM200
- Pop-top design, self cleaning
- Installs upright
- 1" (25mm) male thread connection
DMMEM200- Pop-top design, self cleaning
- Installs upright
- 1" (25mm) male thread connection
-
- Nylon webbing whipchecks - easier to install, less damaging to hose and will provide a longer service life
- The use of a whip check restraint is mandatory on all hoses. If you have any questions about the best restraint to use, please contact us directly.
-
DM2263001
- Pneumatically operated via twinline hoses
- Compatible with all twinline pneumatic remote control systems
- 1/4" and 1/8" air supply threaded connectors
- Operate by pulling down the safety flap and hold the large handle down
DM2263001- Pneumatically operated via twinline hoses
- Compatible with all twinline pneumatic remote control systems
- 1/4" and 1/8" air supply threaded connectors
- Operate by pulling down the safety flap and hold the large handle down
-
When your G3 Trigger Deadman system needs refreshed, we have the replacement parts you need. These are the control modules - select the type you need from the options available shown here. Note: The Control Module includes the trigger. The complete G3 Deadman assembly is available here.
-
The Western Tech Sure-Fire Electric Remote Control Handle (aka Redhead deadman or ball-and-chain deadman) is a compact, hands-free electrically-operated deadman switch. Usable in all applications from 12 to 120v, it's designed for safe operation of blast nozzles, fueling applications, and more.
Key Features:
- Compact 'hands-free' design
- Ball and chain type (except model 1003) - operator must use as per instruction manual
- 12 or 24 Volt are the most common applications
- 2-wire is standard or 3-position toggle switch for use with integrated remote abrasive cut-off switch
Standard Configurations:
- Standard Ball & Chain Deadman, available as:
- Repairable or Sealed
- 2, 3, or 4 wire
- Trigger Deadman
- Sealed (only)
- NEMA 4 for wet or dry
- 2-wire, designed specifically for fueling
- Wrist-EZ
- Repairable
- 2 or 3 wire
- Ergonomic - reduces fatigue when blasting large projects
All Western Tech Deadmans are supplied with a 4' bare wire whip. Pre-fitted options with choice of wire length and plugs are optionally available, or order TwistLok plugs and/or control wire / cable separately.
-
DM227000003APKWhen your G3 Trigger Deadman system needs refreshed, we have the replacement parts you need. This is the trigger safety flap sub assembly, which includes the spring & pin, and comes 2 per pack.
- Safety flap subassembly requires positive trigger engagement by the operator, thereby preventing accidental blasting
- Heavy-duty construction for long-lasting use
- See the repair parts tab on the main BAABS page here for additional replacement parts.
DM227000003APKWhen your G3 Trigger Deadman system needs refreshed, we have the replacement parts you need. This is the trigger safety flap sub assembly, which includes the spring & pin, and comes 2 per pack.- Safety flap subassembly requires positive trigger engagement by the operator, thereby preventing accidental blasting
- Heavy-duty construction for long-lasting use
- See the repair parts tab on the main BAABS page here for additional replacement parts.
-
BA01972
BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement valve plug for the 1" piston type Outlet Valve (factory part number 01972).
BA01972BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement valve plug for the 1" piston type Outlet Valve (factory part number 01972).
-
The BAABS deadman assembly works on all sizes of blast hose. To facilitate the various hose diameters, a hose adapter set is required. Each adapter set includes 2 grippers (2 sets are used per BAABS) and is offered in the following sizes:
- M1, for HE1 nozzle holder (1" whip OR 3/4" 4-ply hose)
- M2, for HE2 nozzle holder (1-1/4" whip OR 1" 4-ply hose)
- M3, for HE3 nozzle holder (1-1/2" whip OR 1-1/4" 4-ply hose)
- M4, for HE4 nozzle holder (1-1/2" 4-ply hose)
Our Blasting & UHP Site Equipment category offers everything you need for efficient and effective surface preparation. For abrasive blasting, we supply a variety of blasting pots, nozzles, and blast hoses that ensure consistent media flow and superior performance. If you’re working with ultra-high-pressure water blasting, our UHP pumps and water jetting accessories are engineered for maximum power and precision, making them ideal for removing coatings, rust, and other heavy contaminants. Whether you’re tackling a large industrial project or a specialized cleaning job, our equipment is designed to meet the highest standards of safety and efficiency. Need assistance? Our team is here to provide expert guidance on selecting the best tools for your needs.