Blasting, UHP & Site Equipment
Showing 211–225 of 600 results
-
DMRMCVIBK
BlastOne has the parts to maintain your Clemco® blast equipment. This is the rebuild kit for the 1-½" inlet valve (replaces factory part number 01927). Includes the following:
- BA01982 Compression Spring, small
- BA01998 Plug Washers (2)
- BA02000 Compression Spring, large
- BA02002 Plug Washer Retainer
- BA02006 Bottom Cap Seal
- BA02007 O-Ring, large
- BA02008 O-Ring, small
If you need the rebuild kit for the 1" inlet valve version, click here.
NOTE: BlastOne also has retrofit kits with upgraded valves, and which are designed to reduce maintenance while keeping your current pot. For pressure hold retrofit kits, see here. For pressure-release kits, see here.
DMRMCVIBKBlastOne has the parts to maintain your Clemco® blast equipment. This is the rebuild kit for the 1-½" inlet valve (replaces factory part number 01927). Includes the following:
- BA01982 Compression Spring, small
- BA01998 Plug Washers (2)
- BA02000 Compression Spring, large
- BA02002 Plug Washer Retainer
- BA02006 Bottom Cap Seal
- BA02007 O-Ring, large
- BA02008 O-Ring, small
If you need the rebuild kit for the 1" inlet valve version, click here.
NOTE: BlastOne also has retrofit kits with upgraded valves, and which are designed to reduce maintenance while keeping your current pot. For pressure hold retrofit kits, see here. For pressure-release kits, see here.
-
-
BA02002BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement plug washer retainer for the remote control valve (factory part number 02002).BA02002BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement plug washer retainer for the remote control valve (factory part number 02002).
-
GV2410320SPBV
- Tri-Clover Connector with Built in Ball-Valve
- Locate between the metering valve and the bottom of the pot to reduce maintenance time on the metering valve.
- Combines 2 time savers:
- Tri-Clover connection allows for easy removal of metering valve.
- Ball valve allows for removal of metering valve without emptying the pot.
- 1 1/4" x 1 1/4" NPT Threads - suits most blast pots and abrasive metering valves
- Use thread sealant tape or compound to ensure an airtight connection
- NOTE - this option adds 6 inches in height. Ensure that your pot has the required clearance before ordering, or that you can add the needed height to your existing pot.
GV2410320SPBV- Tri-Clover Connector with Built in Ball-Valve
- Locate between the metering valve and the bottom of the pot to reduce maintenance time on the metering valve.
- Combines 2 time savers:
- Tri-Clover connection allows for easy removal of metering valve.
- Ball valve allows for removal of metering valve without emptying the pot.
- 1 1/4" x 1 1/4" NPT Threads - suits most blast pots and abrasive metering valves
- Use thread sealant tape or compound to ensure an airtight connection
- NOTE - this option adds 6 inches in height. Ensure that your pot has the required clearance before ordering, or that you can add the needed height to your existing pot.
-
BAWF8012
- Suits BlastOne MistBlaster Wet/Dry Blasting System
- Used to filter particles out water entering into the pump
- 1/2" FNPT x 1/2" FNPT fittings
- Clear Bowl Strainer Water Filter with Yellow 80 Mesh Filter
- Sold Individually
- Genuine BlastOne Product
BAWF8012- Suits BlastOne MistBlaster Wet/Dry Blasting System
- Used to filter particles out water entering into the pump
- 1/2" FNPT x 1/2" FNPT fittings
- Clear Bowl Strainer Water Filter with Yellow 80 Mesh Filter
- Sold Individually
- Genuine BlastOne Product
-
BA7046003
- Suits Schmidt 3.5 Blast Pot and MistBlaster Secondary Wheel
- 10" Wheel & Tire
- Never Flat, rubber filled tires
- Makes for easy portability onsite
- Sold Individually
- Genuine Parts - Manufactured by Axxiom Manufacturing/Schmidt
BA7046003- Suits Schmidt 3.5 Blast Pot and MistBlaster Secondary Wheel
- 10" Wheel & Tire
- Never Flat, rubber filled tires
- Makes for easy portability onsite
- Sold Individually
- Genuine Parts - Manufactured by Axxiom Manufacturing/Schmidt
-
AFPRGUC200RE
- Suits MistBlaster Blast Machine
- Used to measure the pressure of the blasting and in-coming air
- U-Clamp Panel Mount Gauge
- 2.5" Diameter
- Will measure up to 200 PSI - do not exceed manufacturers recommendation for blast equipment
- Liquid Filled gauge gives you a more steady reading
- Rear Entry gauge
- Sold Individually
AFPRGUC200RE- Suits MistBlaster Blast Machine
- Used to measure the pressure of the blasting and in-coming air
- U-Clamp Panel Mount Gauge
- 2.5" Diameter
- Will measure up to 200 PSI - do not exceed manufacturers recommendation for blast equipment
- Liquid Filled gauge gives you a more steady reading
- Rear Entry gauge
- Sold Individually
-
-
FMAK3WAY
- Suits 'Chicago' Quick Connect 2-Lug couplings
- 3-Way Splitter Coupling for air hose
- Use this item to split an air line into two lines
- Sold individually
- Genuine NECO part
FMAK3WAY- Suits 'Chicago' Quick Connect 2-Lug couplings
- 3-Way Splitter Coupling for air hose
- Use this item to split an air line into two lines
- Sold individually
- Genuine NECO part
-
AFREGARG30
- Suits BlastOne Mist Blaster
- Used to regulate the water pressure and pump outflow
- Water Fittings 3/8"
- Regulates pressure up to 125psi
- Sold Individually
AFREGARG30- Suits BlastOne Mist Blaster
- Used to regulate the water pressure and pump outflow
- Water Fittings 3/8"
- Regulates pressure up to 125psi
- Sold Individually
-
AVAILABLE FOR RENTAL OR PURCHASE
- The Western Technology 3475 is the #1 Nozzle Mounted Blast Light preferred by Blasting Contractors
- Powerful 1,325 lumen LED light array
- Can be hose mounted (with stanchion) or hand-held
- Multiple configurations available
- Light with 10' cable (unfitted)
- Light with 50-300' cable, fitted with one of the following
- 12-28v Battery Alligator Clips
- 110v Transformer and standard 110v plug
- Mini 3116 twist-lock plugs (use with the optional Western Technology 4-outlet transformer)
- Genuine Products - Manufactured by Western Technology
-
BABL3070L
- BABL3070 / BABL3070L - an economical Blast Light option
- Typically mounted directly behind the blast nozzle to give the blasting operator light where he is blasting.
- Comes with 10ft bare cable, order a Electrical connector separately
- Low voltage 12 volt operation for operator safety
- Uses 20W Halogen light bulb
BABL3070L- BABL3070 / BABL3070L - an economical Blast Light option
- Typically mounted directly behind the blast nozzle to give the blasting operator light where he is blasting.
- Comes with 10ft bare cable, order a Electrical connector separately
- Low voltage 12 volt operation for operator safety
- Uses 20W Halogen light bulb
-
The 3500 series light from Western Technology is designed for users who want the reliability of a USA-made LED blast nozzle light, but who do not need the more costly explosion-proof and ultra bright output of the 3475 light. It is an excellent entry-level nozzle light system and is easy to service in the field.
-
BAMV4P6
- Suits BlastOne MistBlaster
- Used by the operator to select different operation modes
- Dry Blast
- Wet Blast
- Wash Down Mode
- Sold Individually, does include the 4" handle which is not pictured
- Genuine Long-Lasting product
BAMV4P6- Suits BlastOne MistBlaster
- Used by the operator to select different operation modes
- Dry Blast
- Wet Blast
- Wash Down Mode
- Sold Individually, does include the 4" handle which is not pictured
- Genuine Long-Lasting product
-
FMCFGP
- Suits FMCF 4-Claw Crowsfoot Couplings
- Check coupling gaskets daily - worn gaskets will leak air
- Keep spares in your toolbox
- Come in a pack of 10
- Genuine NECO parts
FMCFGP- Suits FMCF 4-Claw Crowsfoot Couplings
- Check coupling gaskets daily - worn gaskets will leak air
- Keep spares in your toolbox
- Come in a pack of 10
- Genuine NECO parts