Blasting, UHP & Site Equipment
Showing 166–180 of 600 results
-
IPC1003
- Replacement brake housing for RotorBlast Internal Pipe Blasting Tool
IPC1003- Replacement brake housing for RotorBlast Internal Pipe Blasting Tool
-
IPC1015
- Replacement rear end plate for RotorBlast Internal Pipe Blasting Tool
IPC1015- Replacement rear end plate for RotorBlast Internal Pipe Blasting Tool
-
FPSP25
- FPSP25, RB-2 Replacement 1" Threaded Plug
- For IPC1000 RotorBlast
- (Replaces part number IPC1001)
- Note: 4 of these are included in Spare Parts Kit, IPC1099
FPSP25- FPSP25, RB-2 Replacement 1" Threaded Plug
- For IPC1000 RotorBlast
- (Replaces part number IPC1001)
- Note: 4 of these are included in Spare Parts Kit, IPC1099
-
-
DMMEM200
- Pop-top design, self cleaning
- Installs upright
- 1" (25mm) male thread connection
DMMEM200- Pop-top design, self cleaning
- Installs upright
- 1" (25mm) male thread connection
-
- Robots made by Blastman Robotics specifically for Blastroom applications
- Available as 4-Axis, 7-Axis or 8-Axis.
- Available as Wall Mount or Gantry Mount
- Optional Man cabin for manual blasting which can come mounted on the blasting arm, or as a separate cabin
- 20+ years of installation and robotic experience
- Read here for more pictures of Blastman Blasting Robots
-
- Nylon webbing whipchecks - easier to install, less damaging to hose and will provide a longer service life
- The use of a whip check restraint is mandatory on all hoses. If you have any questions about the best restraint to use, please contact us directly.
-
DM2263001
- Pneumatically operated via twinline hoses
- Compatible with all twinline pneumatic remote control systems
- 1/4" and 1/8" air supply threaded connectors
- Operate by pulling down the safety flap and hold the large handle down
DM2263001- Pneumatically operated via twinline hoses
- Compatible with all twinline pneumatic remote control systems
- 1/4" and 1/8" air supply threaded connectors
- Operate by pulling down the safety flap and hold the large handle down
-
When your G3 Trigger Deadman system needs refreshed, we have the replacement parts you need. These are the control modules - select the type you need from the options available shown here. Note: The Control Module includes the trigger. The complete G3 Deadman assembly is available here.
-
DM2229FITTINGS
- Deadman control valve fittings kit
- Fittings only - control valve/coil sold separately
DM2229FITTINGS- Deadman control valve fittings kit
- Fittings only - control valve/coil sold separately
-
The Sure-Fire Electric Deadman Remote Control Handle (aka Redhed deadman or ball-and-chain deadman) is a compact, hands-free electrically-operated tool. Available in 12V and 24V options, it's designed for enhanced operational control. Note: Accessories like TwistLok plug and extension cable sold separately.
- Compact 'hands-free' design
- Ball and chain not included - operator must use as per instruction manual
- 12 Volt or 24 Volt electric operation
- 2-wire is standard or 3-position toggle switch for use with integrated remote abrasive cut-off switch
- Order TwistLok plug and/or extension cable separately
-
DM227000003APKWhen your G3 Trigger Deadman system needs refreshed, we have the replacement parts you need. This is the trigger safety flap sub assembly, which includes the spring & pin, and comes 2 per pack.
- Safety flap subassembly requires positive trigger engagement by the operator, thereby preventing accidental blasting
- Heavy-duty construction for long-lasting use
- See the repair parts tab on the main BAABS page here for additional replacement parts.
DM227000003APKWhen your G3 Trigger Deadman system needs refreshed, we have the replacement parts you need. This is the trigger safety flap sub assembly, which includes the spring & pin, and comes 2 per pack.- Safety flap subassembly requires positive trigger engagement by the operator, thereby preventing accidental blasting
- Heavy-duty construction for long-lasting use
- See the repair parts tab on the main BAABS page here for additional replacement parts.
-
BA01972BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement valve plug for the remote control valve (factory part number 01972).BA01972BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement valve plug for the remote control valve (factory part number 01972).