Blasting, UHP & Site Equipment
Showing 151–165 of 600 results
-
DMRMCATCKBlastOne has the parts to maintain your Clemco® blast equipment. This is the rebuild kit for 1" abrasive trap on the RMC valve (factory part number 01925). Includes the following:
- DMRMCATCS Abrasive Trap Screen (3)
- BA02013 O-Ring (2)
- Clean Screen Decal (Not available separately)
- DMRMCATCSG Gasket
DMRMCATCKBlastOne has the parts to maintain your Clemco® blast equipment. This is the rebuild kit for 1" abrasive trap on the RMC valve (factory part number 01925). Includes the following:- DMRMCATCS Abrasive Trap Screen (3)
- BA02013 O-Ring (2)
- Clean Screen Decal (Not available separately)
- DMRMCATCSG Gasket
-
BLASTHOSE
- High quality, long lasting sandblasting hose
- Blast Hoses have a thick, anti-static, natural rubber liner
- Made to BlastOne Blast Hose specification
- Rated to minimum 175 psi - 3:1 safety factor
- Robust TuffRap™ outer blasting hose cover
- Heavy Wall Blast Hose
- Recommended for use as an extension hose
- Fit with your choice of couplings
- Supplied as a bare hose coil or as a Certified Blast Hose Assembly – certificate is available upon request.
-
- Superior quality, lightweight and highly flexible sandblasting hose
- Blast Hoses have anti-static, natural rubber liner
- Rated to minimum 175 psi - 3:1 safety factor
- Robust TuffRap outer blasting hose cover
- Commonly known as whip hose, supa hose or supahose
- Fit with your choice of nozzle holder and couplings
- Please Request Rental Pricing
-
- Fitted Blast Hose
- Premium blast hose fitted with couplings only
- We have many ways to fit a blast hose
- For a Extension hose we recommend you use 4 ply type
- Fitted and Quality Controlled by BlastOne Trained Staff
-
- Premium blast hose fitted with couplings and nozzle holder
- We have many ways to fit a blast hose
- For a Whip hose we recommend you use 2Ply type
- Most common composition is Aluminum Coupling with Contractor Thread Nylon Nozzle holder
- Fitted and Quality Controlled by BlastOne Trained Staff
-
DMASAPRK00
- ASAP Safety System Retrofit Kit for 12V DC Thompson® Valve system.
- This System changes the depressurization flow of the air in the blast hose
- Allows a 200ft blast hose to depressurize in less than 1 second
- Changes the depressurization flow to exit backwards through full porting vs having to exit out of the blast nozzle
- Saves Seconds - Saves Lives, if a blaster drops a hose every micro-second counts, it takes the energy out of the hose immediately.
- Sold as a complete kit to be added on to an Electric Controlled Thompson® Valve Blast Pot
- Genuine Products - Manufactured by Schmidt® / Axxiom Manufacturing
DMASAPRK00- ASAP Safety System Retrofit Kit for 12V DC Thompson® Valve system.
- This System changes the depressurization flow of the air in the blast hose
- Allows a 200ft blast hose to depressurize in less than 1 second
- Changes the depressurization flow to exit backwards through full porting vs having to exit out of the blast nozzle
- Saves Seconds - Saves Lives, if a blaster drops a hose every micro-second counts, it takes the energy out of the hose immediately.
- Sold as a complete kit to be added on to an Electric Controlled Thompson® Valve Blast Pot
- Genuine Products - Manufactured by Schmidt® / Axxiom Manufacturing
-
The Air Pressure Gage is a crucial tool for monitoring air pressure in your blast equipment, ensuring optimal performance and safety. This general-purpose gage is sold individually and designed not to exceed the manufacturer's recommendation. Secure your blasting operations with this reliable Air Pressure Gage for precise and consistent air pressure tracking.
- General purpose air pressure gages for monitoring of air pressure
- Do not exceed manufacturers recommendation for blast equipment
- Sold Individually
-
-
AFREG06G
- Used for reduced-pressure blasting of delicate surfaces such as car panels, stone facades, etc.
- Not recommended for normal production blasting due to inherent flow restrictions. Regulator should be disconnected or by-passed for full pressure blasting
AFREG06G- Used for reduced-pressure blasting of delicate surfaces such as car panels, stone facades, etc.
- Not recommended for normal production blasting due to inherent flow restrictions. Regulator should be disconnected or by-passed for full pressure blasting
-
BA50785K273High-pressure brass pipe fitting for use with:
- NPT female threads: Air, Water, BSP and metric threads: air, natural gas, oil, water
BA50785K273High-pressure brass pipe fitting for use with:- NPT female threads: Air, Water, BSP and metric threads: air, natural gas, oil, water
-
SBMGE
- Modified High-cube-style shipping container construction (20 ft, 40 ft)
- Watertight, Weatherproof design
- Completely self-contained for maximum portability
- Simple setup/installation
- Partial abrasive recovery system, with shovel-in hopper
- Available as fully assembled unit or retrofit kit
- Instant Preliminary Quotes Available on Request!
SBMGE- Modified High-cube-style shipping container construction (20 ft, 40 ft)
- Watertight, Weatherproof design
- Completely self-contained for maximum portability
- Simple setup/installation
- Partial abrasive recovery system, with shovel-in hopper
- Available as fully assembled unit or retrofit kit
- Instant Preliminary Quotes Available on Request!
-
Junction Box assemblies include the deadman controls for Bulk pots, and are required when retrofitting an old pot with new valves. Available in 2 and 4 outlet configurations.