Blasting, UHP & Site Equipment
Showing 136–150 of 600 results
-
IPC4003CReplacement parts for Clemco's HolloBlast Internal Pipe Blaster. Includes throat rod as shown. NOTE - If you have the ConeBlast brand version of this, the correct part number to use for this is IPC4003.IPC4003CReplacement parts for Clemco's HolloBlast Internal Pipe Blaster. Includes throat rod as shown. NOTE - If you have the ConeBlast brand version of this, the correct part number to use for this is IPC4003.
-
IPC4004Replacement part for ConeBlast Note: This is one of two that are required - see IPC4005 for the other one.IPC4004Replacement part for ConeBlast Note: This is one of two that are required - see IPC4005 for the other one.
-
DMECK3999
- Abrasion resistant, flex coated control cable
- Designed to clip onto your battery and connect to your electric deadman control box
- Powers your deadman system from your compressor or any other 12v available battery.
DMECK3999- Abrasion resistant, flex coated control cable
- Designed to clip onto your battery and connect to your electric deadman control box
- Powers your deadman system from your compressor or any other 12v available battery.
-
DCBPP12A
- Lightweight, portable, high efficiency fan
- 2000 cfm, 12" fan
DCBPP12A- Lightweight, portable, high efficiency fan
- 2000 cfm, 12" fan
-
IPC1099Common wear items for IPC1000 RotorBlast includes the following:
- 30 Leather dust seals IPC1013
- 2 Tube locking rings, IPC1011
- 1 Bearing seal, IPC1012
- 2 Double seal bearings, IPC1009
- 1 Tube casting, IPC1008
- 1 Brake with lining, IPC1007
- 1 Rotating head, IPC1002
- 4 Pipe plugs, IPC1001 (aka FPSP25)
- 2 Tungsten Carbide washers, IPC1014
- 2 Rubber lined nipples, IPC1018
IPC1099Common wear items for IPC1000 RotorBlast includes the following:- 30 Leather dust seals IPC1013
- 2 Tube locking rings, IPC1011
- 1 Bearing seal, IPC1012
- 2 Double seal bearings, IPC1009
- 1 Tube casting, IPC1008
- 1 Brake with lining, IPC1007
- 1 Rotating head, IPC1002
- 4 Pipe plugs, IPC1001 (aka FPSP25)
- 2 Tungsten Carbide washers, IPC1014
- 2 Rubber lined nipples, IPC1018
-
IPC1008
- IPC1008, RB-6 Replacement tube casting with 1 3/8" thread
- For IPC1000 RotorBlast
- NOTE - this item is also included in Spare Parts Kit, IPC1099
IPC1008- IPC1008, RB-6 Replacement tube casting with 1 3/8" thread
- For IPC1000 RotorBlast
- NOTE - this item is also included in Spare Parts Kit, IPC1099
-
Tite-Space nozzles are angle nozzles, designed for use in areas that are especially difficult to access, and feature:
- 3/8" NPT Thread in either Male or Female configuration
- Male version has brass threads and requires a minimum opening clearance of 1". This version is 1-7/8" long.
- Female version has steel threads and requires a minimum opening clearance of only ¾". This version is 3-1/8" long.
- These nozzles are often used in conjunction with our Tite Space Invader Blasting Kit, available here
- Angle options include:
- 45° & 60° forward blast
- 90° right angle blast
- 135° reverse blast
- Some options available in double, triple or quad orifices in addition to single.
- Note: Using nozzles with multiple orifices will multiply the compressed air CFM requirement accordingly.
- Stock version uses tungsten carbide lining.
-
- 2-claw Blast Hose QC Quick couplings
- Available in Brass, Aluminum, Steel and Nylon
- 2 types available - Standard and MegaMax.
- NOTE: MegaMax and Standard couplings require an adapter to fit together
- MegaMax couplings are Full-Flow, designed to remove the air restrictions caused by standard couplings and increases the PSI available to the nozzle. The increased PSI is mostly beneficial when doing high-production blasting using 1.5" or 2" ID Blast Hoses.
- These are unthreaded couplings designed for blast hoses only. Threaded QC fittings are used on the metering valve outlet, and can be found HERE.
- Industry Size Commonly Referred to as Q1, Q-1, Q2, Q-2, Q3, Q-3, Q4, Q-4, Q6, Q-6
-
- DO NOT use for breathing air
- Industrial interchange fittings are 300 psi rated
- Brass or plated steel bodies with brass or steel valves
- Most commonly used in the USA
-
AVAILABLE FOR RENTAL OR PURCHASE
- #1 Deadman in the industry
- Larger internal ports make it faster acting, making it a safer handle
- Compact, slimline design - 30% easier then other handles to hold down
- Simple to make in-field repairs as required
- Available as Electric or Pneumatic
- Geniune Products - Manufactured by Schmidt / Axxiom Manufacturing
-
DMRGNE2000PC
- Large blade design
- 12 Volt or 24 volt electric operation
- Unit supplied with 12" (300mm) short cable
- Comes with TwistLok plug
DMRGNE2000PC- Large blade design
- 12 Volt or 24 volt electric operation
- Unit supplied with 12" (300mm) short cable
- Comes with TwistLok plug
-
DMRGN1000
- Conventional bleeder-type deadman control handle
- 1/4" (6mm) (supply) x 1/8" (3mm) (return) threaded connectors
- Large lever design
- Use only with equipment designed for bleeder-style handles - DO NOT use with Combo or Thompson Valves
DMRGN1000- Conventional bleeder-type deadman control handle
- 1/4" (6mm) (supply) x 1/8" (3mm) (return) threaded connectors
- Large lever design
- Use only with equipment designed for bleeder-style handles - DO NOT use with Combo or Thompson Valves
-
DMRGNE2000
- Large blade design
- 12 Volt or 24 Volt electric operation
- Unit supplied with 12" (300 mm) short cable
- Order TwistLok plug and/or extension cable separately
- Clamps not included
DMRGNE2000- Large blade design
- 12 Volt or 24 Volt electric operation
- Unit supplied with 12" (300 mm) short cable
- Order TwistLok plug and/or extension cable separately
- Clamps not included