My Account
Blast Nozzles
Silenced / Quiet Nozzles
Angled Blast Nozzles
General Purpose Nozzles
High Performance Nozzles
Internal Pipe (ID) Nozzles
Short / Compact Nozzles
Tools & Nozzle Thread Adapters
Wet-Blast, Specialty & Other Nozzles
Showing 31–44 of 44 results
-
BNATC360COffers Quick and Easy Setup for blast cleaning on internals of small pipes- Blasts in a 360 degree pattern
- Can be used in pipes from 2.5 to 5 inch ID
- Machined aluminum jacket with tungsten carbide liner
- Replaceable tungsten carbide deflector tip
- Coarse, 2" Contractor Thread
- Screws directly into nozzle holder
- NOTE - requires Nylon nozzle holder with contractor threads
BNATC360COffers Quick and Easy Setup for blast cleaning on internals of small pipes- Blasts in a 360 degree pattern
- Can be used in pipes from 2.5 to 5 inch ID
- Machined aluminum jacket with tungsten carbide liner
- Replaceable tungsten carbide deflector tip
- Coarse, 2" Contractor Thread
- Screws directly into nozzle holder
- NOTE - requires Nylon nozzle holder with contractor threads
-
- 3/4" NPSM (20mm) 'M' Medium thread
- 1/2" (13mm) throat entry
- Tungsten carbide liner
- Aluminum jacket and thread
- Very short - 1-5/8" long
- Commonly used with Internal Pipe RotorBlast when blasting pipes between 8 and 11 inches in diameter, or in other hard-to-reach blasting areas
- Uses HFGFBSP nozzle washers (not included) - order separately
-
FAN BLAST™ Fan Pattern SiALON Blast Nozzles give wide, even blast patterns, ideal for sweep blasting. Different variations include:- 2" UNC (50mm) coarse contractor thread
- 1-1/4" ( N.P.S.M.) fine industrial thread
-
BNATLW3C
- 2" UNC (50 mm) coarse Contractor thread
- 1 1/4" (32 mm) wide throat entry, long venturi
- Tungsten carbide liner
- 'The Original' Contractor favorite
- Standard weight aluminum jacket and thread
- Use HF G32P nozzle washes (not included - order separately)
BNATLW3C- 2" UNC (50 mm) coarse Contractor thread
- 1 1/4" (32 mm) wide throat entry, long venturi
- Tungsten carbide liner
- 'The Original' Contractor favorite
- Standard weight aluminum jacket and thread
- Use HF G32P nozzle washes (not included - order separately)
-
- Ideal for blasting recesses, pipe internals, behind angles, lattices etc.
- 2" UNC (50mm) coarse Contractor thread 'C' or 1 1/4" NPSM (32mm) Fine Industrial thread 'F'
- 3/4" (20mm) throat entry
- 45° single, double or triple (equi-spaced) side outlets
- Tungsten carbide liner
- **Triple orifice nozzles have triple air & abrasive consumption!
-
VCBVRA4
- #4 Nozzle
- 90 degree
- Tungsten Carbide
- For Right Angle Workhead
VCBVRA4- #4 Nozzle
- 90 degree
- Tungsten Carbide
- For Right Angle Workhead
-
- Suits 1 1/4" blast hose
- Durable steel jacket
-
INH131PBAGThe “Blast Nozzle Wear Size Analyzer Gauge” (SKU: INH131PBAG) efficiently determines the internal diameter and wear level of a blast nozzle orifice, ensuring optimal blasting performance.
- Used to determine the internal diameter of a blast nozzle orifice
- Allows you to determine the level of wear of the blast nozzle
- Comes with a removable cap and crayon
- Has size markings to allow you to see quickly what size your nozzle is
- Sold Individually
INH131PBAGThe “Blast Nozzle Wear Size Analyzer Gauge” (SKU: INH131PBAG) efficiently determines the internal diameter and wear level of a blast nozzle orifice, ensuring optimal blasting performance.- Used to determine the internal diameter of a blast nozzle orifice
- Allows you to determine the level of wear of the blast nozzle
- Comes with a removable cap and crayon
- Has size markings to allow you to see quickly what size your nozzle is
- Sold Individually
Part Number Purchase Price INH131PBAG $70.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$70.00
-
-
BNWB1-US
- Water ring creates a dust suppression "curtain" around blast pattern.
- Basic wet blasting option.
- Attach to a standard garden hose, has a flow regulator to give some control over water volume
- Does use a large amount of water. For larger projects, consider using a MistBlaster to reduce cleanup.
- Does not include the nozzle. Will fit the Ultra nozzle, the TVP tungsten carbide nozzle, but does not fit the Hyper nozzle.
BNWB1-US- Water ring creates a dust suppression "curtain" around blast pattern.
- Basic wet blasting option.
- Attach to a standard garden hose, has a flow regulator to give some control over water volume
- Does use a large amount of water. For larger projects, consider using a MistBlaster to reduce cleanup.
- Does not include the nozzle. Will fit the Ultra nozzle, the TVP tungsten carbide nozzle, but does not fit the Hyper nozzle.
-
IPC4002H
- Extended Life replacement tip for the ConeBlast Internal Pipe Blasting tool
- Boron Carbide composition
- Recommended for longer-run projects or any project using an aggressive media type
- Lower-cost IPC4002 option available if extended life is not required
IPC4002H- Extended Life replacement tip for the ConeBlast Internal Pipe Blasting tool
- Boron Carbide composition
- Recommended for longer-run projects or any project using an aggressive media type
- Lower-cost IPC4002 option available if extended life is not required
-
HTIBIX09NK
- Suits IBIX 6 Easy Blaster (HTIBIX06EB)
- Genuine part – manufactured by IBIX
- Nozzle Kit
- Sold individually
HTIBIX09NK- Suits IBIX 6 Easy Blaster (HTIBIX06EB)
- Genuine part – manufactured by IBIX
- Nozzle Kit
- Sold individually
Part Number Purchase Price HTIBIX09NK $402.73 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$402.73
-
-
Thread adapters are a convenient way to allow nozzles of one thread type to be used in nozzle holders of a different type. Boron Carbide is the longest life version, but not available in all configurations. Polyurethane, steel, aluminum, etc. are also available and are lower in cost.
- Available configurations:
- Contractor (2" / 50mm) Thread Nozzle Holders to:
- ¾" (20mm) Medium Thread nozzles
- 1-¼" (32mm) Fine Thread nozzles
- Flange nozzles
- Fine (1-¼" / 32mm) Thread Nozzle Holders to:
- ¾" (20mm) Medium Thread nozzles
- 2" / 50mm Contractor thread nozzles. This is a BlastOne Exclusive!
- Contractor (2" / 50mm) Thread Nozzle Holders to:
- Available configurations:
-
BAHNGN5
- Suits the Nozzle Pressure Test Kit
- Size: 18G x 1-½”
- Comes in 5 pack
BAHNGN5- Suits the Nozzle Pressure Test Kit
- Size: 18G x 1-½”
- Comes in 5 pack
-
IPC4002
- Replacement tip for the ConeBlast Internal Pipe Blasting Tool
- Tungsten carbide composition
- Recommended for short-run projects or projects using less aggressive media types
- If tips with longer life are needed, use the IPC4002H version
IPC4002- Replacement tip for the ConeBlast Internal Pipe Blasting Tool
- Tungsten carbide composition
- Recommended for short-run projects or projects using less aggressive media types
- If tips with longer life are needed, use the IPC4002H version
