Blast Nozzles
Showing 16–30 of 52 results
-
Tite-Space nozzles are angle nozzles, designed for use in areas that are especially difficult to access, and feature:
- 3/8" NPT Thread in either Male or Female configuration
- Male version has brass threads and requires a minimum opening clearance of 1". This version is 1-7/8" long.
- Female version has steel threads and requires a minimum opening clearance of only ¾". This version is 3-1/8" long.
- These nozzles are often used in conjunction with our Tite Space Invader Blasting Kit, available here
- Angle options include:
- 45° & 60° forward blast
- 90° right angle blast
- 135° reverse blast
- Some options available in double, triple or quad orifices in addition to single.
- Note: Using nozzles with multiple orifices will multiply the compressed air CFM requirement accordingly.
- Stock version uses tungsten carbide lining.
-
BNATC360COffers Quick and Easy Setup for blast cleaning on internals of small pipes
- Blasts in a 360 degree pattern
- Can be used in pipes from 2.5 to 5 inch ID
- Machined aluminum jacket with tungsten carbide liner
- Replaceable tungsten carbide deflector tip
- Coarse, 2" Contractor Thread
- Screws directly into nozzle holder
- NOTE - requires Nylon nozzle holder with contractor threads
BNATC360COffers Quick and Easy Setup for blast cleaning on internals of small pipes- Blasts in a 360 degree pattern
- Can be used in pipes from 2.5 to 5 inch ID
- Machined aluminum jacket with tungsten carbide liner
- Replaceable tungsten carbide deflector tip
- Coarse, 2" Contractor Thread
- Screws directly into nozzle holder
- NOTE - requires Nylon nozzle holder with contractor threads
-
IPC3001The deflection tip in the ConeBlast Jr. internal pipe blaster is responsible for ensuring an even blast pattern. The abrasive stream hits the tip and fans out in a 360° pattern. It is subject to high wear and is a common replacement part. Additional details:
- Application: This tip works only in the ConeBlast Jr., not the larger ConeBlast version.
- Construction: This tip is made from tungsten carbide. For large pipe-cleaning projects, contact us for options on longer-life versions.
IPC3001The deflection tip in the ConeBlast Jr. internal pipe blaster is responsible for ensuring an even blast pattern. The abrasive stream hits the tip and fans out in a 360° pattern. It is subject to high wear and is a common replacement part. Additional details:- Application: This tip works only in the ConeBlast Jr., not the larger ConeBlast version.
- Construction: This tip is made from tungsten carbide. For large pipe-cleaning projects, contact us for options on longer-life versions.
-
BAHNGKitThe “Blast Nozzle Pressure Test Kit” (SKU: BAHNGKit) by BlastOne ensures quick and accurate nozzle pressure testing. Comes complete with a stainless steel pressure gage, needles, and a protective leather-bound case.
- For testing air pressure at the nozzle
- Uses hyperdermic needles which insert into the blast hose to take the nozzle pressure
- Insert about 6-10ft behind blaster for most accurate reading
- Test kit includes:
- Liquid filled stainless steel pressure gage with dual pressure & efficiency scale
- Four needles and instructions
- Protective leather bound case
- Sold as a Kit
- MPN 2010-014-03
BAHNGKitThe “Blast Nozzle Pressure Test Kit” (SKU: BAHNGKit) by BlastOne ensures quick and accurate nozzle pressure testing. Comes complete with a stainless steel pressure gage, needles, and a protective leather-bound case.- For testing air pressure at the nozzle
- Uses hyperdermic needles which insert into the blast hose to take the nozzle pressure
- Insert about 6-10ft behind blaster for most accurate reading
- Test kit includes:
- Liquid filled stainless steel pressure gage with dual pressure & efficiency scale
- Four needles and instructions
- Protective leather bound case
- Sold as a Kit
- MPN 2010-014-03
-
INH131PBAGThe “Blast Nozzle Wear Size Analyzer Gauge” (SKU: INH131PBAG) efficiently determines the internal diameter and wear level of a blast nozzle orifice, ensuring optimal blasting performance.
- Used to determine the internal diameter of a blast nozzle orifice
- Allows you to determine the level of wear of the blast nozzle
- Comes with a removable cap and crayon
- Has size markings to allow you to see quickly what size your nozzle is
- Sold Individually
INH131PBAGThe “Blast Nozzle Wear Size Analyzer Gauge” (SKU: INH131PBAG) efficiently determines the internal diameter and wear level of a blast nozzle orifice, ensuring optimal blasting performance.- Used to determine the internal diameter of a blast nozzle orifice
- Allows you to determine the level of wear of the blast nozzle
- Comes with a removable cap and crayon
- Has size markings to allow you to see quickly what size your nozzle is
- Sold Individually
-
Thread adapters are a convenient way to allow nozzles of one thread type to be used in nozzle holders of a different type. Boron Carbide is the longest life version, but not available in all configurations. Polyurethane, steel, aluminum, etc. are also available and are lower in cost.
- Available configurations:
- Contractor (2" / 50mm) Thread Nozzle Holders to:
- ¾" (20mm) Medium Thread nozzles
- 1-¼" (32mm) Fine Thread nozzles
- Flange nozzles
- Fine (1-¼" / 32mm) Thread Nozzle Holders to:
- ¾" (20mm) Medium Thread nozzles
- 2" / 50mm Contractor thread nozzles. This is a BlastOne Exclusive!
- Contractor (2" / 50mm) Thread Nozzle Holders to:
- Available configurations:
-
Nozzle gaskets (aka nozzle washers) help reduce static electricity and nozzle wear. Below is information on the various types:
- Brass or Aluminum nozzle holders.
- For Medium thread (¾"), use HFGFBSP / NW-1.
- For Contractor thread (2"), use HFGFBLP / NW-3.
- For Fine thread (1-¼"), use HFGFBMP / NW-4.
- Nylon nozzle holders.
- For 1" (Narrow) Nozzle throat, use HFG25P / NW-25.
- For 1-¼" (Wide) Nozzle throat, use HFG32P / NW-32.
- Brass or Aluminum nozzle holders.
-
The blast nozzle for the ConeBlast Internal Pipe Blaster is a key element in controlling the volume of air/abrasive flow. It is subject to high wear and is a common replacement part. Additional details:
- Sizes. Two sizes are available, depending on the capacity of your compressed air source.
- BNAFR8 requires 250CFM
- BNARF10 requires 400CFM
- (The size variants are interchangeable.)
- Construction. These nozzles are made from tungsten carbide. For large pipe-cleaning projects, contact us for options on longer-life versions.
- Sizes. Two sizes are available, depending on the capacity of your compressed air source.
-
The Nozzle Pressure Hypodermic Needles are precision replacement needles for the Clemco and other brands Nozzle Pressure Gauges. Sold in packs of 5 or 20, these needles are essential for accurately measuring nozzle pressure during abrasive blasting, ensuring optimal system performance. Features:
- Compatibility: For use with the Clemco 01232 and other brands Nozzle Pressure Gauges.
- Pack Size: Multiple quantity packs for convenient inventory.
- Purpose: Measures pressure where it counts - at the nozzle - quantifying the friction and pressure loss in the blasting system.
- Durable Design: Built to withstand abrasive blasting conditions.
-
The Water Induction Nozzle (aka WIN nozzle) is an economical way to enter the wet blasting market. Commonly used in smaller projects, it offers excellent water flow control. Additional Details:
- Use with standard dry blasting equipment. No modifications required.
- Connects to standard garden hose, or you can use a tank with a standard 12v pump if you need to add rust inhibitor to the water.
- Typically stocked with tungsten carbide liner and contractor threads, it is also available with silicon nitride liner and/or fine threads. Contact us for details.
-
Effective solution for blasting in hard-to-reach areas such as:
- Inside of bolt holes
- Inside of close-fitting steel channels
- Difficult access structural steel, such as bridge supports, etc.
- Offers standard extension lengths from 10 to 60 inches, with other options available by special order.
- Can be used with most abrasives
- Attaches to blast hoses with standard 2-prong couplings (not nozzle holders)
- Nozzle is NOT included and shown for illustration purposes only. Requires junior size 3/8" NPT threaded nozzles. Choose the correct one for your application from our Tite-Space nozzle selection here.
- Female version requires only ¾" clearance.
- Male version requires only 1" clearance.
-
The Clemco Nozzles for SG-300 Suction Gun are high-performance tungsten carbide nozzles designed to enhance the efficiency and durability of the SG-300 Suction Gun. Available in sizes from #2 to #8, these nozzles ensure optimal abrasive flow and blasting precision. Key Features:
- Durable tungsten carbide nozzles for long-lasting performance.
- Available sizes:
- 1/8" (#2)
- 3/16" (#3)
- 1/4" (#4)
- 5/16" (#5)
- 3/8" (#6)
- 1/2" (#8)
- Air rushing through the suction gun’s mixing chamber draws blast media into the airstream and propels it out through the nozzle for effective blasting.
- Designed for seamless compatibility with the Clemco SG-300 Suction Gun.
- Genuine Clemco product ensures reliable performance and durability in abrasive blasting environments.