My Account
Blast Nozzles
Silenced / Quiet Nozzles
Angled Blast Nozzles
General Purpose Nozzles
High Performance Nozzles
Internal Pipe (ID) Nozzles
Short / Compact Nozzles
Nozzle Tools Parts & Adapters
Wet-Blast, Specialty & Other Nozzles
Showing 16–30 of 44 results
-
IPC3001The deflection tip in the ConeBlast Jr. internal pipe blaster is responsible for ensuring an even blast pattern. The abrasive stream hits the tip and fans out in a 360° pattern. It is subject to high wear and is a common replacement part. Additional details:- Application: This tip works only in the ConeBlast Jr., not the larger ConeBlast version.
- Construction: This tip is made from tungsten carbide. For large pipe-cleaning projects, contact us for options on longer-life versions.
IPC3001The deflection tip in the ConeBlast Jr. internal pipe blaster is responsible for ensuring an even blast pattern. The abrasive stream hits the tip and fans out in a 360° pattern. It is subject to high wear and is a common replacement part. Additional details:- Application: This tip works only in the ConeBlast Jr., not the larger ConeBlast version.
- Construction: This tip is made from tungsten carbide. For large pipe-cleaning projects, contact us for options on longer-life versions.
-
BAHNGKitThe “Blast Nozzle Pressure Test Kit” (SKU: BAHNGKit) by BlastOne ensures quick and accurate nozzle pressure testing. Comes complete with a stainless steel pressure gage, needles, and a protective leather-bound case.
- For testing air pressure at the nozzle
- Uses hyperdermic needles which insert into the blast hose to take the nozzle pressure
- Insert about 6-10ft behind blaster for most accurate reading
- Test kit includes:
- Liquid filled stainless steel pressure gage with dual pressure & efficiency scale
- Four needles and instructions
- Protective leather bound case
- Sold as a Kit
- MPN 2010-014-03
BAHNGKitThe “Blast Nozzle Pressure Test Kit” (SKU: BAHNGKit) by BlastOne ensures quick and accurate nozzle pressure testing. Comes complete with a stainless steel pressure gage, needles, and a protective leather-bound case.- For testing air pressure at the nozzle
- Uses hyperdermic needles which insert into the blast hose to take the nozzle pressure
- Insert about 6-10ft behind blaster for most accurate reading
- Test kit includes:
- Liquid filled stainless steel pressure gage with dual pressure & efficiency scale
- Four needles and instructions
- Protective leather bound case
- Sold as a Kit
- MPN 2010-014-03
-
INH131PBAGThe “Blast Nozzle Wear Size Analyzer Gauge” (SKU: INH131PBAG) efficiently determines the internal diameter and wear level of a blast nozzle orifice, ensuring optimal blasting performance.
- Used to determine the internal diameter of a blast nozzle orifice
- Allows you to determine the level of wear of the blast nozzle
- Comes with a removable cap and crayon
- Has size markings to allow you to see quickly what size your nozzle is
- Sold Individually
INH131PBAGThe “Blast Nozzle Wear Size Analyzer Gauge” (SKU: INH131PBAG) efficiently determines the internal diameter and wear level of a blast nozzle orifice, ensuring optimal blasting performance.- Used to determine the internal diameter of a blast nozzle orifice
- Allows you to determine the level of wear of the blast nozzle
- Comes with a removable cap and crayon
- Has size markings to allow you to see quickly what size your nozzle is
- Sold Individually
Part Number Purchase Price INH131PBAG $70.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$70.00
-
-
Nozzle gaskets (aka nozzle washers) help reduce static electricity and nozzle wear. Below is information on the various types:
- Brass or Aluminum nozzle holders.
- For Medium thread (¾"), use HFGFBSP / NW-1.
- For Contractor thread (2"), use HFGFBLP / NW-3.
- For Fine thread (1-¼"), use HFGFBMP / NW-4.
- Nylon nozzle holders.
- For 1" (Narrow) Nozzle throat, use HFG25P / NW-25.
- For 1-¼" (Wide) Nozzle throat, use HFG32P / NW-32.
- Brass or Aluminum nozzle holders.
-
Thread adapters are a convenient way to allow nozzles of one thread type to be used in nozzle holders of a different type. Boron Carbide is the longest life version, but not available in all configurations. Polyurethane, steel, aluminum, etc. are also available and are lower in cost.
- Available configurations:
- Contractor (2" / 50mm) Thread Nozzle Holders to:
- ¾" (20mm) Medium Thread nozzles
- 1-¼" (32mm) Fine Thread nozzles
- Flange nozzles
- Fine (1-¼" / 32mm) Thread Nozzle Holders to:
- ¾" (20mm) Medium Thread nozzles
- 2" / 50mm Contractor thread nozzles. This is a BlastOne Exclusive!
- Contractor (2" / 50mm) Thread Nozzle Holders to:
- Available configurations:
-
The blast nozzle for the ConeBlast Internal Pipe Blaster is a key element in controlling the volume of air/abrasive flow. It is subject to high wear and is a common replacement part. Additional details:
- Sizes. Two sizes are available, depending on the capacity of your compressed air source.
- BNAFR8 requires 250CFM
- BNARF10 requires 400CFM
- (The size variants are interchangeable.)
- Construction. These nozzles are made from tungsten carbide. For large pipe-cleaning projects, contact us for options on longer-life versions.
- Sizes. Two sizes are available, depending on the capacity of your compressed air source.
-
The Water Induction Nozzle (aka WIN nozzle) is an economical way to enter the wet blasting market. Commonly used in smaller projects, it offers excellent water flow control. Additional Details:
- Use with standard dry blasting equipment. No modifications required.
- Connects to standard garden hose, or you can use a tank with a standard 12v pump if you need to add rust inhibitor to the water.
- Typically stocked with tungsten carbide liner and contractor threads, it is also available with silicon nitride liner and/or fine threads. Contact us for details.
-
Effective solution for blasting in hard-to-reach areas such as:- Inside of bolt holes
- Inside of close-fitting steel channels
- Difficult access structural steel, such as bridge supports, etc.
- Offers standard extension lengths from 10 to 60 inches, with other options available by special order.
- Can be used with most abrasives
- Attaches to blast hoses with standard 2-prong couplings (not nozzle holders)
- Nozzle is NOT included and shown for illustration purposes only. Requires junior size 3/8" NPT threaded nozzles. Choose the correct one for your application from our Tite-Space nozzle selection here.
- Female version requires only ¾" clearance.
- Male version requires only 1" clearance.
-
Short nozzles with straight bore are made for close-range spot blasting. The blast pattern is small, making it ideal for cleaning small areas, railings, etc. Other details as follows:- Fine thread, 1-¼" - 11-½" NPSM
- Available in sizes from #3 to #8
- Tungsten carbide liner
-
Short venturi nozzles are made for close-range blasting. The venturi allows the widest possible pattern in limited space environments. Other details as follows:
- Available in either Contractor thread (50mm) or Fine thread (1-¼")
- Available in orifice sizes from #3 to #12
- Tungsten carbide liner
- Multiple jacket types available
-
Refresh your Tite Space Invader Blasting Kit with replacement repair rods. Comes in various lengths from 12 - 60 inches.
- Durable and long-lasting construction
- 3/8" Schedule 40, NPT threaded on both ends
- Use with Tite-Space Invaders or with Junior size internal pipe blasters
-
BNWBHPAdapts a contractor thread nozzle to a wet blasting nozzle. More control than with a halo nozzle.
- Injects water internally into the abrasive / air stream
- Adapter connects to the nozzle holder, and holds a contractor thread nozzle.
- Includes needle valve to optimize mixture
- Requires a pressure washer to operate, set for 500-1000 psi, 2-4 GPM flow
BNWBHPAdapts a contractor thread nozzle to a wet blasting nozzle. More control than with a halo nozzle.- Injects water internally into the abrasive / air stream
- Adapter connects to the nozzle holder, and holds a contractor thread nozzle.
- Includes needle valve to optimize mixture
- Requires a pressure washer to operate, set for 500-1000 psi, 2-4 GPM flow
-
VCBV066
- Suits Blast and Vac Workhead VCBV100 (Wheeled Unit)
- Nozzle Internal Venturi 3/8" #6 Long Venturi
- Long Lasting
- Sold Individually
VCBV066- Suits Blast and Vac Workhead VCBV100 (Wheeled Unit)
- Nozzle Internal Venturi 3/8" #6 Long Venturi
- Long Lasting
- Sold Individually
-
These medium thread nozzles have a longer venturi than the BNAT nozzle series, making them ideal for use in our RotorBlast internal pipe blaster (when blasting pipe 12" in diamater or greater). Available in multiple orifice sizes. When using them in pairs (like when using in the RotorBlast), be sure to calculate your compressor CFM size requirement accordingly.
-
VCBV104
- Suits Blast and Vac Workhead BNV-3/VCBV200 (Standard Unit)
- Nozzle Internal Venturi 1/4" #4 Long Venturi
- Long Lasting
- Sold Individually
VCBV104- Suits Blast and Vac Workhead BNV-3/VCBV200 (Standard Unit)
- Nozzle Internal Venturi 1/4" #4 Long Venturi
- Long Lasting
- Sold Individually
