Blast Equipment Parts
Showing 76–90 of 351 results
-
DMRGNE2000PC
- Large blade design
- 12 Volt or 24 volt electric operation
- Unit supplied with 12" (300mm) short cable
- Comes with TwistLok plug
DMRGNE2000PC- Large blade design
- 12 Volt or 24 volt electric operation
- Unit supplied with 12" (300mm) short cable
- Comes with TwistLok plug
-
DMRGN1000
- Conventional bleeder-type deadman control handle
- 1/4" (6mm) (supply) x 1/8" (3mm) (return) threaded connectors
- Large lever design
- Use only with equipment designed for bleeder-style handles - DO NOT use with Combo or Thompson Valves
DMRGN1000- Conventional bleeder-type deadman control handle
- 1/4" (6mm) (supply) x 1/8" (3mm) (return) threaded connectors
- Large lever design
- Use only with equipment designed for bleeder-style handles - DO NOT use with Combo or Thompson Valves
-
DMRGNE2000
- Large blade design
- 12 Volt or 24 Volt electric operation
- Unit supplied with 12" (300 mm) short cable
- Order TwistLok plug and/or extension cable separately
- Clamps not included
DMRGNE2000- Large blade design
- 12 Volt or 24 Volt electric operation
- Unit supplied with 12" (300 mm) short cable
- Order TwistLok plug and/or extension cable separately
- Clamps not included
-
DMRMCATCKBlastOne has the parts to maintain your Clemco® blast equipment. This is the rebuild kit for 1" abrasive trap on the RMC valve (factory part number 01925). Includes the following:
- DMRMCATCS Abrasive Trap Screen (3)
- BA02013 O-Ring (2)
- Clean Screen Decal (Not available separately)
- DMRMCATCSG Gasket
DMRMCATCKBlastOne has the parts to maintain your Clemco® blast equipment. This is the rebuild kit for 1" abrasive trap on the RMC valve (factory part number 01925). Includes the following:- DMRMCATCS Abrasive Trap Screen (3)
- BA02013 O-Ring (2)
- Clean Screen Decal (Not available separately)
- DMRMCATCSG Gasket
-
DMASAPRK00
- ASAP Safety System Retrofit Kit for 12V DC Thompson® Valve system.
- This System changes the depressurization flow of the air in the blast hose
- Allows a 200ft blast hose to depressurize in less than 1 second
- Changes the depressurization flow to exit backwards through full porting vs having to exit out of the blast nozzle
- Saves Seconds - Saves Lives, if a blaster drops a hose every micro-second counts, it takes the energy out of the hose immediately.
- Sold as a complete kit to be added on to an Electric Controlled Thompson® Valve Blast Pot
- Genuine Products - Manufactured by Schmidt® / Axxiom Manufacturing
DMASAPRK00- ASAP Safety System Retrofit Kit for 12V DC Thompson® Valve system.
- This System changes the depressurization flow of the air in the blast hose
- Allows a 200ft blast hose to depressurize in less than 1 second
- Changes the depressurization flow to exit backwards through full porting vs having to exit out of the blast nozzle
- Saves Seconds - Saves Lives, if a blaster drops a hose every micro-second counts, it takes the energy out of the hose immediately.
- Sold as a complete kit to be added on to an Electric Controlled Thompson® Valve Blast Pot
- Genuine Products - Manufactured by Schmidt® / Axxiom Manufacturing
-
The Air Pressure Gage is a crucial tool for monitoring air pressure in your blast equipment, ensuring optimal performance and safety. This general-purpose gage is sold individually and designed not to exceed the manufacturer's recommendation. Secure your blasting operations with this reliable Air Pressure Gage for precise and consistent air pressure tracking.
- General purpose air pressure gages for monitoring of air pressure
- Do not exceed manufacturers recommendation for blast equipment
- Sold Individually
-
-
AFREG06G
- Used for reduced-pressure blasting of delicate surfaces such as car panels, stone facades, etc.
- Not recommended for normal production blasting due to inherent flow restrictions. Regulator should be disconnected or by-passed for full pressure blasting
AFREG06G- Used for reduced-pressure blasting of delicate surfaces such as car panels, stone facades, etc.
- Not recommended for normal production blasting due to inherent flow restrictions. Regulator should be disconnected or by-passed for full pressure blasting
-
BA50785K273High-pressure brass pipe fitting for use with:
- NPT female threads: Air, Water, BSP and metric threads: air, natural gas, oil, water
BA50785K273High-pressure brass pipe fitting for use with:- NPT female threads: Air, Water, BSP and metric threads: air, natural gas, oil, water
-
Junction Box assemblies include the deadman controls for Bulk pots, and are required when retrofitting an old pot with new valves. Available in 2 and 4 outlet configurations.
-
IPC1003
- Replacement brake housing for RotorBlast Internal Pipe Blasting Tool
IPC1003- Replacement brake housing for RotorBlast Internal Pipe Blasting Tool
-
IPC1015
- Replacement rear end plate for RotorBlast Internal Pipe Blasting Tool
IPC1015- Replacement rear end plate for RotorBlast Internal Pipe Blasting Tool
-
FPSP25
- FPSP25, RB-2 Replacement 1" Threaded Plug
- For IPC1000 RotorBlast
- (Replaces part number IPC1001)
- Note: 4 of these are included in Spare Parts Kit, IPC1099
FPSP25- FPSP25, RB-2 Replacement 1" Threaded Plug
- For IPC1000 RotorBlast
- (Replaces part number IPC1001)
- Note: 4 of these are included in Spare Parts Kit, IPC1099
Explore our extensive range of blast equipment parts designed to enhance and maintain your blasting operations. From deadman control systems to high-pressure fittings, we provide everything you need to keep your equipment running smoothly and efficiently. Our selection includes durable components like hex pipe nipples, pop-up valves, and hose fittings, ensuring compatibility and high performance. Trust in our products to deliver reliability and safety across all your blasting projects.