My Account
Blast Equipment Parts
Abrasive Metering Valves
Air Control Valves & Related
Deadman / Control Systems
General Repair Parts for Blast Pots
Internal Pipe (ID) System Components
MistBlaster Specific Parts
Sponge Blast Equipment Parts
Vacuum Blaster Workheads, Parts & Related
VertiDrive Specific Parts
Showing 61–75 of 358 results
-
IPC4004Replacement part for ConeBlast Note: This is one of two that are required - see IPC4005 for the other one.IPC4004Replacement part for ConeBlast Note: This is one of two that are required - see IPC4005 for the other one. -
DMECK3999
- Abrasion resistant, flex coated control cable
- Designed to clip onto your battery and connect to your electric deadman control box
- Powers your deadman system from your compressor or any other 12v available battery.
DMECK3999- Abrasion resistant, flex coated control cable
- Designed to clip onto your battery and connect to your electric deadman control box
- Powers your deadman system from your compressor or any other 12v available battery.
-
IPC1099Common wear items for IPC1000 RotorBlast includes the following:
- 30 Leather dust seals IPC1013
- 2 Tube locking rings, IPC1011
- 1 Bearing seal, IPC1012
- 2 Double seal bearings, IPC1009
- 1 Tube casting, IPC1008
- 1 Brake with lining, IPC1007
- 1 Rotating head, IPC1002
- 4 Pipe plugs, IPC1001 (aka FPSP25)
- 2 Tungsten Carbide washers, IPC1014
- 2 Rubber lined nipples, IPC1018
IPC1099Common wear items for IPC1000 RotorBlast includes the following:- 30 Leather dust seals IPC1013
- 2 Tube locking rings, IPC1011
- 1 Bearing seal, IPC1012
- 2 Double seal bearings, IPC1009
- 1 Tube casting, IPC1008
- 1 Brake with lining, IPC1007
- 1 Rotating head, IPC1002
- 4 Pipe plugs, IPC1001 (aka FPSP25)
- 2 Tungsten Carbide washers, IPC1014
- 2 Rubber lined nipples, IPC1018
-
BlastOne offers a full selection of industrial fittings. This group is the Hose Barb x Female Pipe Swivel (Ball Seat), or aka “Nut & Tail”. Other information is as follows:
- Hose Barb (aka Hose tail) x NPSM FPX Female Swivel
- aka “Nut and Tail”
- First dimension is hose ID for hose barb
- Use with crimp ferrules or worm gear clamps
- Applications: Low Pressure SAE general service air, water, and hydraulic hose
- Operating Pressure Range: 250 PSI maximum at 72F
- Operating Temperature Range: -40 to 160F at 150 PSI max
-
IPC1008
- IPC1008, RB-6 Replacement tube casting with 1 3/8" thread
- For IPC1000 RotorBlast
- NOTE - this item is also included in Spare Parts Kit, IPC1099
IPC1008- IPC1008, RB-6 Replacement tube casting with 1 3/8" thread
- For IPC1000 RotorBlast
- NOTE - this item is also included in Spare Parts Kit, IPC1099
-
BlastOne offers a full selection of industrial fittings. This group is the brass hose menders. Other information is as follows:
- Push-on Hose Barb (aka Hose tail) ends
- Yellow plastic caps
- Not intended for use with crimp ferrules or worm clamps
- Applications: Compatible with air, most fluids, and low-pressure hydraulic hoses that are push-lock type
- Operating Pressure Range: 350 PSI maximum
-
- DO NOT use for breathing air
- Industrial interchange fittings are 300 psi rated
- Brass or plated steel bodies with brass or steel valves
- Most commonly used in the USA
-
AVAILABLE FOR RENTAL OR PURCHASE
- #1 Deadman in the industry
- Larger internal ports make it faster acting, making it a safer handle
- Compact, slimline design - 30% easier then other handles to hold down
- Simple to make in-field repairs as required
- Available as Electric or Pneumatic
- Geniune Products - Manufactured by Schmidt / Axxiom Manufacturing
-
DMRGNE2000PC
- Large blade design
- 12 Volt or 24 volt electric operation
- Unit supplied with 12" (300mm) short cable
- Comes with TwistLok plug
DMRGNE2000PC- Large blade design
- 12 Volt or 24 volt electric operation
- Unit supplied with 12" (300mm) short cable
- Comes with TwistLok plug
Part Number Purchase Price DMRGNE2000PC $195.51 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$195.51
-
-
DMRGN1000
- Conventional bleeder-type deadman control handle
- 1/4" (6mm) (supply) x 1/8" (3mm) (return) threaded connectors
- Large lever design
- Use only with equipment designed for bleeder-style handles - DO NOT use with Combo or Thompson Valves
DMRGN1000- Conventional bleeder-type deadman control handle
- 1/4" (6mm) (supply) x 1/8" (3mm) (return) threaded connectors
- Large lever design
- Use only with equipment designed for bleeder-style handles - DO NOT use with Combo or Thompson Valves
-
DMRGNE2000
- Large blade design
- 12 Volt or 24 Volt electric operation
- Unit supplied with 12" (300 mm) short cable
- Order TwistLok plug and/or extension cable separately
- Clamps not included
DMRGNE2000- Large blade design
- 12 Volt or 24 Volt electric operation
- Unit supplied with 12" (300 mm) short cable
- Order TwistLok plug and/or extension cable separately
- Clamps not included
Part Number Purchase Price DMRGNE2000 $229.99 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$229.99
-
-
DMRMCATCKBlastOne has the parts to maintain your Clemco® blast equipment. This is the rebuild kit for 1" abrasive trap on the RMC valve (factory part number 01925). Includes the following:
- DMRMCATCS Abrasive Trap Screen (3)
- BA02013 O-Ring (2)
- Clean Screen Decal (Not available separately)
- DMRMCATCSG Gasket
DMRMCATCKBlastOne has the parts to maintain your Clemco® blast equipment. This is the rebuild kit for 1" abrasive trap on the RMC valve (factory part number 01925). Includes the following:- DMRMCATCS Abrasive Trap Screen (3)
- BA02013 O-Ring (2)
- Clean Screen Decal (Not available separately)
- DMRMCATCSG Gasket
-
DMASAPRK00
- ASAP Safety System Retrofit Kit for 12V DC Thompson® Valve system.
- This System changes the depressurization flow of the air in the blast hose
- Allows a 200ft blast hose to depressurize in less than 1 second
- Changes the depressurization flow to exit backwards through full porting vs having to exit out of the blast nozzle
- Saves Seconds - Saves Lives, if a blaster drops a hose every micro-second counts, it takes the energy out of the hose immediately.
- Sold as a complete kit to be added on to an Electric Controlled Thompson® Valve Blast Pot
- Genuine Products - Manufactured by Schmidt® / Axxiom Manufacturing
DMASAPRK00- ASAP Safety System Retrofit Kit for 12V DC Thompson® Valve system.
- This System changes the depressurization flow of the air in the blast hose
- Allows a 200ft blast hose to depressurize in less than 1 second
- Changes the depressurization flow to exit backwards through full porting vs having to exit out of the blast nozzle
- Saves Seconds - Saves Lives, if a blaster drops a hose every micro-second counts, it takes the energy out of the hose immediately.
- Sold as a complete kit to be added on to an Electric Controlled Thompson® Valve Blast Pot
- Genuine Products - Manufactured by Schmidt® / Axxiom Manufacturing
Part Number Purchase Price DMASAPRK00 $6,493.12 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$6,493.12
-
-
The Air Pressure Gage is a crucial tool for monitoring air pressure in your blast equipment, ensuring optimal performance and safety. This general-purpose gage is sold individually and designed not to exceed the manufacturer's recommendation. Secure your blasting operations with this reliable Air Pressure Gage for precise and consistent air pressure tracking.
- General purpose air pressure gages for monitoring of air pressure
- Do not exceed manufacturers recommendation for blast equipment
- Sold Individually
-
Part Number Purchase Price BA700751902 $265.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$265.00
-
Explore our extensive range of blast equipment parts designed to enhance and maintain your blasting operations. From deadman control systems to high-pressure fittings, we provide everything you need to keep your equipment running smoothly and efficiently. Our selection includes durable components like hex pipe nipples, pop-up valves, and hose fittings, ensuring compatibility and high performance. Trust in our products to deliver reliability and safety across all your blasting projects.
