My Account
Blast Equipment Parts
Abrasive Metering Valves & Parts
Air Control Valves & Related
Deadman / Control Systems
General Repair Parts for Blast Pots
Internal Pipe (ID) System Components
MistBlaster Specific Parts
Sponge Blast Equipment Parts
Vacuum Blaster Workheads, Parts & Related
VertiDrive Specific Parts
Showing 46–60 of 359 results
-
The Brass Nut and Tails Female Pipe Coupling (FP x FP) is a high-quality machined brass fitting designed for hydraulic and pneumatic systems. Manufactured to meet SAE J530 and J531 standards, this pipe coupling can handle pressures up to 1,000 PSI and temperatures ranging from -65°F to +250°F. It’s ideal for industrial applications requiring durable, leak-proof connections.
Main Product Features:
- Solid machined brass construction for enhanced durability
- Female pipe coupling (FP x FP) design
- Performs to SAE J530 and J531 standards Working pressure: 1,000 PSI; Burst pressure: 4,000 PSI
- Temperature range: -65°F to +250°F
- Compatible with hydraulic and pneumatic systems
- Ideal for high-pressure applications in fluid transfer
-
BlastOne offers a full selection of industrial fittings. This group is the Male Thread x Push-Lock Hose Barb. Other information is as follows:
- Push-on Hose Barb (aka Hose tail) x NPTF Male Thread. (First dimension is the hose ID)
- Not intended for use with crimp ferrules or worm clamps
- Yellow plastic cap
- Applications: Compatible with air, most fluids, and low-pressure hydraulic hoses that are push-lock type
- Operating Pressure Range: 350 PSI maximum
-
BlastOne offers a full selection of industrial fittings. This group is the Male Thread x 90° Elbow Push-Lock Hose Barb. Other information is as follows:
- Male NPTF x Push-on Hose Barb 90° Elbow
- Yellow plastic cap
- Not intended for use with crimp ferrules or worm clamps
- Applications: Compatible with air, most fluids, and low-pressure hydraulic hoses that are push-lock type
- Operating Pressure Range: 350 PSI maximum
-
BlastOne offers a full selection of industrial fittings. This group is the Brass Reducer Bushings. Other information is as follows:
- 1st dimension is the NPTF Male Pipe size
- 2nd dimension is the NPTF Female Pipe size
- Operating Pressure Range: 1000 PSI
- Operating Temperature Range: -65 to 250F
-
DMRMCATCSG
BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement gasket for 1" abrasive trap screen (factory part number 02434).
DMRMCATCSGBlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement gasket for 1" abrasive trap screen (factory part number 02434).
Part Number Purchase Price DMRMCATCSG $5.67 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$5.67
-
-
Upgrade old technology Bulk pots from donut valves & pinch valves to state-of-the-art TeraValve systems using a retrofit kit. Available in 2 or 4 outlet configurations. The CEN Mega Exhaust Muffler retrofit kit is a common option that can be conveniently added when performing this retrofit. Note: matching Junction Box is available separately. Retrofitting is recommended only for mega blasters with good structural integrity. These are the parts kits only. BlastOne can perform the retrofit if desired - contact us for pricing and details.
-
FPGE50T20
- 2" with ¾" takeoff
- Durable galvanized steel construction
- Secure and leak-proof fittings
- High resistance to corrosion
FPGE50T20- 2" with ¾" takeoff
- Durable galvanized steel construction
- Secure and leak-proof fittings
- High resistance to corrosion
-
VCBVM015
- Durable construction for long-lasting performance
- Versatile brush suitable for various workhead applications
- Enhances cleaning efficiency by removing debris and dirt effectively
- Ergonomic design for a comfortable grip
- Easy maintenance with simple rinsing
- Compatible with multiple workhead models
VCBVM015- Durable construction for long-lasting performance
- Versatile brush suitable for various workhead applications
- Enhances cleaning efficiency by removing debris and dirt effectively
- Ergonomic design for a comfortable grip
- Easy maintenance with simple rinsing
- Compatible with multiple workhead models
-
VCBVM001This OEM Axxiom replacement filter is an important element in maintaining the efficiency of the MiniBRS vacuum blaster. Constructed of polyester media, this dust filter is 12" long by 6" diameter.
MPN: 8033-000-01
VCBVM001This OEM Axxiom replacement filter is an important element in maintaining the efficiency of the MiniBRS vacuum blaster. Constructed of polyester media, this dust filter is 12" long by 6" diameter.
MPN: 8033-000-01
-
- Premium Deadman Technology
- Comfortable to hold - increases operator compliance
- Available as Electric or Pneumatic in 2 configurations each:
- 2-position (on/off) version
- 3-position version with the following:
- Position 1 - Air Off / Abrasive Off
- Position 2 - Air On / Abrasive Off (for blowing off)
- Position 3 - Air On / Abrasive On (for blasting)
- This handle can be used with any blast control setup, but comes standard with each new BAABS deadman system purchase - see here for the main BAABS page.
- Genuine Products - Manufactured by Schmidt / Axxiom Manufacturing
-
IPC1012
- IPC1012 RB-9 Replacement Bearing Seal
- For IPC1000 RotorBlast
- Note: This item is also included in Spare Parts Kit, IPC1099
IPC1012- IPC1012 RB-9 Replacement Bearing Seal
- For IPC1000 RotorBlast
- Note: This item is also included in Spare Parts Kit, IPC1099
-
IPC1007
- IPC1007 RB-5 Replacement brake w/lining
- For IPC1000 RotorBlast
- Note: This item is also included in Spare Parts kit, IPC1099
IPC1007- IPC1007 RB-5 Replacement brake w/lining
- For IPC1000 RotorBlast
- Note: This item is also included in Spare Parts kit, IPC1099
-
IPC1009
- IPC1009, RB-8 Replacement Double-seal Bearing
- For IPC1000 RotorBlast (2 required)
- Note: 2 of these are also included in Spare Parts Kit, IPC1099
IPC1009- IPC1009, RB-8 Replacement Double-seal Bearing
- For IPC1000 RotorBlast (2 required)
- Note: 2 of these are also included in Spare Parts Kit, IPC1099
-
IPC1013
- IPC1013, RB-10-1 Replacement Dust Seal
- Dust seals are the main wear item in the RotorBlast
- For IPC1000 RotorBlast
- Note: 30 of these leather seals are included in the IPC1099 RotorBlast repair kit
- Note: for a longer life option, a teflon version is also available - see part IPC1013A
IPC1013- IPC1013, RB-10-1 Replacement Dust Seal
- Dust seals are the main wear item in the RotorBlast
- For IPC1000 RotorBlast
- Note: 30 of these leather seals are included in the IPC1099 RotorBlast repair kit
- Note: for a longer life option, a teflon version is also available - see part IPC1013A
-
IPC1002
- IPC1002 RB-1 Replacement Rotating Head
- For IPC1000 RotorBlast
- Note: This item is also included in Spare Parts Kit, IPC1099
- Note: This item does not include nozzles. See part IPC1000 for nozzle recommendations.
IPC1002- IPC1002 RB-1 Replacement Rotating Head
- For IPC1000 RotorBlast
- Note: This item is also included in Spare Parts Kit, IPC1099
- Note: This item does not include nozzles. See part IPC1000 for nozzle recommendations.
Explore our extensive range of blast equipment parts designed to enhance and maintain your blasting operations. From deadman control systems to high-pressure fittings, we provide everything you need to keep your equipment running smoothly and efficiently. Our selection includes durable components like hex pipe nipples, pop-up valves, and hose fittings, ensuring compatibility and high performance. Trust in our products to deliver reliability and safety across all your blasting projects.
