My Account
Blast Equipment Parts
Abrasive Metering Valves & Parts
Air Control Valves & Related
Deadman / Control Systems
General Repair Parts for Blast Pots
Internal Pipe (ID) System Components
MistBlaster Specific Parts
Sponge Blast Equipment Parts
Vacuum Blaster Workheads, Parts & Related
VertiDrive Specific Parts
Showing 256–270 of 367 results
-
GV02431The Clemco Flat Sand Valve (FSV) and the Sentinel valve must be maintained to provide acceptable metering capability. When it needs rebuilt, these OEM Clemco replacement handle bolt spacers are readily available at BlastOne.
MPN: 02424
GV02431The Clemco Flat Sand Valve (FSV) and the Sentinel valve must be maintained to provide acceptable metering capability. When it needs rebuilt, these OEM Clemco replacement handle bolt spacers are readily available at BlastOne.
MPN: 02424
-
BlastOne stocks the Axxiom replacement parts you need to keep your valves operating. These are the bottom base pipe nipples for the Thompson II metering valve:- 1" x 1", MPN 2152-000-19
- 1-¼" x 1-¼", MPN 2152-000-15
- 1-½" x 1-½", MPN2152-000-11
-
BA2497706
- Installed in the riser tube below the pop up valve of the blast pot
- Used to stop backflow of air into the control lines and valves
- Typically used when blasting with fine or dusty abrasives
- Suits 1" riser tubes
- User will need to reduce current riser tube height to make this fit.
- Allows maximum pressure fluctuation without back flow of dust and abrasive.
- Sold individually
- Genuine Parts - Manufactured by Axxiom Manufacturing/Schmidt
BA2497706- Installed in the riser tube below the pop up valve of the blast pot
- Used to stop backflow of air into the control lines and valves
- Typically used when blasting with fine or dusty abrasives
- Suits 1" riser tubes
- User will need to reduce current riser tube height to make this fit.
- Allows maximum pressure fluctuation without back flow of dust and abrasive.
- Sold individually
- Genuine Parts - Manufactured by Axxiom Manufacturing/Schmidt
-
BA840800079
- Essential Safety Item for Megablaster Pot closures
- Designed and installed on all Schmidt Bulk Pots since release in 2010
- Able to be retrofitted to Schmidt Bulk Pots in any of BlastOne Locations
- Ensures that correct operating procedures are followed when opening the fill port.
- Fits over camlock bolts and ensures all bolts remain in the lugs until all cams are fully disengaged, ensuring that the lid can not blow open
- Genuine Parts - Manufactured by Schmidt - Axxiom Manufacturing
BA840800079- Essential Safety Item for Megablaster Pot closures
- Designed and installed on all Schmidt Bulk Pots since release in 2010
- Able to be retrofitted to Schmidt Bulk Pots in any of BlastOne Locations
- Ensures that correct operating procedures are followed when opening the fill port.
- Fits over camlock bolts and ensures all bolts remain in the lugs until all cams are fully disengaged, ensuring that the lid can not blow open
- Genuine Parts - Manufactured by Schmidt - Axxiom Manufacturing
Part Number Purchase Price BA840800079 $1,400.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$1,400.00
-
-
GV212800020
- 1-1/4" Heavy Duty Media Inlet Nipple with increased abrasion resistance
- Connects Metering Valve to Blast Pot
- Suits all Schmidt Abrasive Blast Pots, and any other vessel with a 1 1/4" NPT Metering Valve Ports
GV212800020- 1-1/4" Heavy Duty Media Inlet Nipple with increased abrasion resistance
- Connects Metering Valve to Blast Pot
- Suits all Schmidt Abrasive Blast Pots, and any other vessel with a 1 1/4" NPT Metering Valve Ports
Part Number Purchase Price GV212800020 $56.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$56.00
-
-
GVDNV104The donut valve utilizes a urethane washer which is compressed to control the flow of abrasive media. This washer is a common wear part and is readily available and normally in-stock for immediate shipment.GVDNV104The donut valve utilizes a urethane washer which is compressed to control the flow of abrasive media. This washer is a common wear part and is readily available and normally in-stock for immediate shipment.
-
IPC4002H
- Extended Life replacement tip for the ConeBlast Internal Pipe Blasting tool
- Boron Carbide composition
- Recommended for longer-run projects or any project using an aggressive media type
- Lower-cost IPC4002 option available if extended life is not required
IPC4002H- Extended Life replacement tip for the ConeBlast Internal Pipe Blasting tool
- Boron Carbide composition
- Recommended for longer-run projects or any project using an aggressive media type
- Lower-cost IPC4002 option available if extended life is not required
-
DMPYT99919
- Suits MistBlaster Air Controls and PYTHON Pinch Valve
- Air Pilot Valve Controls Grit Valve by the signal air from the deadman controls
- Sold Individually
DMPYT99919- Suits MistBlaster Air Controls and PYTHON Pinch Valve
- Air Pilot Valve Controls Grit Valve by the signal air from the deadman controls
- Sold Individually
Part Number Purchase Price DMPYT99919 $119.81 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$119.81
-
-
VCBV2605
- Suit Blast and Vac Workhead VCBV200
- Replacement inner and outer brushes create a seal with the surface to capture dust and abrasive
- Suitable for blasting an inside corner
- Sold Individually
VCBV2605- Suit Blast and Vac Workhead VCBV200
- Replacement inner and outer brushes create a seal with the surface to capture dust and abrasive
- Suitable for blasting an inside corner
- Sold Individually
-
VCBV2705
- Suit Blast and Vac Workhead VCBV200
- Replacement inner and outer brushes create a seal with the surface to capture dust and abrasive
- Suitable for blasting an outside corner
- Sold Individually
VCBV2705- Suit Blast and Vac Workhead VCBV200
- Replacement inner and outer brushes create a seal with the surface to capture dust and abrasive
- Suitable for blasting an outside corner
- Sold Individually
-
Pipe fitters and maintenence workers routinely use these fittings in many applications. Specifications and details as follows:
- Stocked in various sizes and lengths
- Schedule 40 galvanized for extended life
- Rated for 150 psi
- Sold individually
-
BAPX2
- Suit Clemco Blast Pots
- Replacement pop-up valve with External Pop up sleeve
- Designed to go over the riser tube to help minimize backward flowing abrasive
- Also work when you have a low pressure and volume of air
- Only needed because Clemco inlet and outlet valves are slow to close
- Seating rings sold separately - BAP5
BAPX2- Suit Clemco Blast Pots
- Replacement pop-up valve with External Pop up sleeve
- Designed to go over the riser tube to help minimize backward flowing abrasive
- Also work when you have a low pressure and volume of air
- Only needed because Clemco inlet and outlet valves are slow to close
- Seating rings sold separately - BAP5
-
BAP5
The Large Seating Ring – Clemco Style offers a reliable replacement solution for maintaining your Clemco blast machine’s optimal sealing performance. Designed specifically compatibility with Clemco pots, it helps ensure proper functionality of the pop-up valve system, reducing downtime and keeping your operation running smoothly.
Key Features & Specifications:
- High-quality replacement seating ring designed for Clemco blast machines
- Large size ensures proper sealing and efficient system performance
- Supports pop-up valves (sold separately) for seamless integration
- Ideal for restoring and maintaining blast machine functionality
BAP5The Large Seating Ring – Clemco Style offers a reliable replacement solution for maintaining your Clemco blast machine’s optimal sealing performance. Designed specifically compatibility with Clemco pots, it helps ensure proper functionality of the pop-up valve system, reducing downtime and keeping your operation running smoothly.
Key Features & Specifications:
- High-quality replacement seating ring designed for Clemco blast machines
- Large size ensures proper sealing and efficient system performance
- Supports pop-up valves (sold separately) for seamless integration
- Ideal for restoring and maintaining blast machine functionality
-
GV212500012
- Heavy duty long life pot connector to prevent the top thread of the MicroValve from wearing
- 1 ¼" (31.75 mm) threads both ends
GV212500012- Heavy duty long life pot connector to prevent the top thread of the MicroValve from wearing
- 1 ¼" (31.75 mm) threads both ends
Part Number Purchase Price GV212500012 $50.30 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$50.30
-
-
BAMBPDL
- Replacement Pump Mist Blaster, installed in the cabinet
- Used to pressurise and meter the water that is sent to the injector block
- allows you to meter the water accurately to get optimal dust control
- Pump 5:1 Bronze construction
- Dry Lube
BAMBPDL- Replacement Pump Mist Blaster, installed in the cabinet
- Used to pressurise and meter the water that is sent to the injector block
- allows you to meter the water accurately to get optimal dust control
- Pump 5:1 Bronze construction
- Dry Lube
Explore our extensive range of blast equipment parts designed to enhance and maintain your blasting operations. From deadman control systems to high-pressure fittings, we provide everything you need to keep your equipment running smoothly and efficiently. Our selection includes durable components like hex pipe nipples, pop-up valves, and hose fittings, ensuring compatibility and high performance. Trust in our products to deliver reliability and safety across all your blasting projects.
