Showing 241–255 of 377 results
-
DM222300005
- Replacement Spring for the 1 ¼” Schmidt Combo Valve
- Simple to install and service.
DM222300005
- Replacement Spring for the 1 ¼” Schmidt Combo Valve
- Simple to install and service.
-
DM222300099
- Full repair kit for the 1-¼ (32mm) combo valve.
- Service Kit is used to repair the combo valve when something happens!
- Sold as a full Kit which includes;
- Main Piston Seal
- Plunger Seal
- Complete set of O-Rings
- Genuine Parts - Manufactured by Schmidt / Axxiom Manufacturing
DM222300099
- Full repair kit for the 1-¼ (32mm) combo valve.
- Service Kit is used to repair the combo valve when something happens!
- Sold as a full Kit which includes;
- Main Piston Seal
- Plunger Seal
- Complete set of O-Rings
- Genuine Parts - Manufactured by Schmidt / Axxiom Manufacturing
-
BMMBESTOP
- Used on the MIST Blaster to enable an Emergency Stop
- Air Directional Control Valve Normally Closed Flow
- Hand Return
- 1/4 NPT
- 53 scfm
- Used for E-Stop
BMMBESTOP
- Used on the MIST Blaster to enable an Emergency Stop
- Air Directional Control Valve Normally Closed Flow
- Hand Return
- 1/4 NPT
- 53 scfm
- Used for E-Stop
-
ASEPPIG
When the primary air dryer is located at a distance from the blast pot, secondary moisture removal becomes critical. The Sponge-Jet moisture separation tank is ideal for this application. Includes the following:
- Handle for easy portability
- Spud / BOSS blast hose fitting
- Multiple sized ball valves & couplings
Note: Customization is available if specific sizes are needed.
Due to our distribution agreement with Sponge-Jet, pricing is not shown on our website. Contact us for fast, competitive pricing or send in the web form quote request.
ASEPPIG
When the primary air dryer is located at a distance from the blast pot, secondary moisture removal becomes critical. The Sponge-Jet moisture separation tank is ideal for this application. Includes the following:
- Handle for easy portability
- Spud / BOSS blast hose fitting
- Multiple sized ball valves & couplings
Note: Customization is available if specific sizes are needed.
Due to our distribution agreement with Sponge-Jet, pricing is not shown on our website. Contact us for fast, competitive pricing or send in the web form quote request.
-
VCBV400
- PiHab is a flexible abrasive blasting enclosure designed for easily adapting to pipes and beams etc....or any other structure that can be wrapped.
- Creates a encapsulation anywhere on a jobsite, especially in a working pipe area
- Kit comes with 5 PiHab bags, Viewing Window, Vaccum set up, Air input set up
- Genuine Parts - Manufactured by Pinovo in Norway
- Minimal Availability in USA - Request a quote/express interest
VCBV400
- PiHab is a flexible abrasive blasting enclosure designed for easily adapting to pipes and beams etc....or any other structure that can be wrapped.
- Creates a encapsulation anywhere on a jobsite, especially in a working pipe area
- Kit comes with 5 PiHab bags, Viewing Window, Vaccum set up, Air input set up
- Genuine Parts - Manufactured by Pinovo in Norway
- Minimal Availability in USA - Request a quote/express interest
-
BA703199902
- Suit Schmidt Blast Pots
- Warning Decal Kit for small blast pots 0.9-10cuft
- Includes all warning labels
- Ensure your equipment has the legal liability notices clearly present
BA703199902
- Suit Schmidt Blast Pots
- Warning Decal Kit for small blast pots 0.9-10cuft
- Includes all warning labels
- Ensure your equipment has the legal liability notices clearly present
-
VCBVRA4
- #4 Nozzle
- 90 degree
- Tungsten Carbide
- For Right Angle Workhead
VCBVRA4
- #4 Nozzle
- 90 degree
- Tungsten Carbide
- For Right Angle Workhead
-
BNATC360BOLT
- Replacement bolt for the Internal Pipe 360° Blast Nozzle
- Sold - individually
BNATC360BOLT
- Replacement bolt for the Internal Pipe 360° Blast Nozzle
- Sold - individually
-
VCBV300
- The PiBlast is designed for automatic blast cleaning of metal pipes.
- This system allows for efficient pipe blasting without the investment of a permanent installation.
- Has 4 blast nozzles which each blast 1/4 of the pipe
- Only available to blast 8"
- Genuine Parts - Manufactured by Pinovo in Norway
- Not Available in USA - Request a quote/express interest
VCBV300
- The PiBlast is designed for automatic blast cleaning of metal pipes.
- This system allows for efficient pipe blasting without the investment of a permanent installation.
- Has 4 blast nozzles which each blast 1/4 of the pipe
- Only available to blast 8"
- Genuine Parts - Manufactured by Pinovo in Norway
- Not Available in USA - Request a quote/express interest
-
BADSEAL125
- Suits BlastOne Vacuload 1 Drum lid
- Used to seal the drum lid to the 55 gallon drum to maintain a good vacuum seal
- 1 1/4" x 1 1/8" D Gasket, with 3M Tape for easy adhesion
- Vacuload 1 Drum requires 8ft of the D-Seal
- Sold by the foot
BADSEAL125
- Suits BlastOne Vacuload 1 Drum lid
- Used to seal the drum lid to the 55 gallon drum to maintain a good vacuum seal
- 1 1/4" x 1 1/8" D Gasket, with 3M Tape for easy adhesion
- Vacuload 1 Drum requires 8ft of the D-Seal
- Sold by the foot
-
VCBV023
- Suits VCBV200 Blast and Vac Workhead
- Blast and Vacuum Central Wear Liner
- Used to prevent premature wear to the workhead
- Sold Individually
VCBV023
- Suits VCBV200 Blast and Vac Workhead
- Blast and Vacuum Central Wear Liner
- Used to prevent premature wear to the workhead
- Sold Individually
-
DM2013402
- Replacement part for the Control Line Pilot Valve
- Reduces wear on both the remote control exhaust valve and the abrasive metering valve.
- Provides sharp, clean and rapid deadman response.
DM2013402
- Replacement part for the Control Line Pilot Valve
- Reduces wear on both the remote control exhaust valve and the abrasive metering valve.
- Provides sharp, clean and rapid deadman response.
-
DM222910099
- Suits Electric Blast Pot Control Valve DM2229100
- Service Kit is used to keep your blast pot operational
- Sold as a Kit containing;
- Piston
- Spring
- Replacement O-rings
- Face Seal
- Genuine Parts - Manufactured by Schmidt / Axxiom Manufacturing
DM222910099
- Suits Electric Blast Pot Control Valve DM2229100
- Service Kit is used to keep your blast pot operational
- Sold as a Kit containing;
- Piston
- Spring
- Replacement O-rings
- Face Seal
- Genuine Parts - Manufactured by Schmidt / Axxiom Manufacturing
-
-
VCBV201
- Suit Blast and Vac Workhead VCBV200
- Fine Thread Nozzle Holder
- Connects Blast hose to the nozzle and the workhead.
- You can not use the Workhead without this
- Sold Individually
VCBV201
- Suit Blast and Vac Workhead VCBV200
- Fine Thread Nozzle Holder
- Connects Blast hose to the nozzle and the workhead.
- You can not use the Workhead without this
- Sold Individually