Blast Equipment Parts
Showing 181–195 of 351 results
-
- Pressure-release deadman control valve i.e., blast machine depressurizes when the deadman handle is released.
- Used when an overhead hopper automatically feeds abrasive into a blast machine.
- Rugged stainless steel body, compact, isolated 2-bolt construction.
- Doubles blast machine refill cycle time.
- Virtual Position Indicator illustrates orifice size, giving the ability to set abrasive flow quickly and consistently.
- Set and forget – flow rates stay set where you put them.
- High wear, rugged plunger seal.
- Stainless steel body for long life.
- Improved urethane clean-out port enabling quick removal of obstructions while improving port and valve life.
- Fit a rebuild kit while the valve is still fitted to the blast machine.
- Sold individually.
- Genuine Products – Manufactured by Schmidt / Axxiom Manufacturing
-
Schmidt changed the abrasive blasting industry when they introduced the MicroValve™. Now known as the MicroValve I (or the Original Microvalve), it is still available although most pressure-release Schmidt pots now use the newer MicroValve III®. It features:
- Simple threaded screw-type metering
- Hardened steel threaded base nipple
- (The brass threaded coupling shown is available separately.)
- Genuine Products - Manufactured by Schmidt® / Axxiom Manufacturing
-
- Thompson Metering Valve II lasts up to 10 times longer than any other valve, due to its unique engineering
- Designed to handle the harshest blasting environments known
- Will handle up to a 3/4" blast nozzle
- Will work with any abrasive, including very fine/dusty abrasives
- Most rugged and reliable valve for any application
- Sold Individually
- Genuine Parts - Made in USA by Schmidt / Axxiom Manufacturing
-
The Thompson I Valve was invented by Bob Schmidt and was instrumental in causing the popularity of pressure hold technology.
- Pressure-hold systems retain the pressure in the blast pot until the deadman handle is depressed. This reduces abrasive and energy waste.
- The Thompson I offers fine control for abrasive metering
- It comes in 3 nipple size configurations:
- 1 ¼” (32 mm) x 1 ¼” (32 mm)
- 1 ½" (38 mm) x 1 ½" (38 mm)
- 2" (50 mm) x 2" (50 mm)
- Threaded-plunger metering design with air actuated operation
- Fits most sand blast hoppers, blast pots or abrasive blasting machines
- Genuine Parts - Manufactured by Schmidt® / Axxiom Manufacturing
-
The Flat Sand Valve is legacy metering technology, where the metering is performed by sliding a lever to open and close the abrasive port. It is simple in design and relatively inexpensive, but has a few limitations. Details as follows:
- Slide-plate metering design, controlled by lever
- 1 1/4" (32 mm) ports
- Features side cleanout-inspection port
- Available with or without outlet nipple and Y-piece (Optional rubber lined nipple is available to extend nipple life.)
- The major limitations are:
- Not recommended for use with metallic abrasives
- The slide plate/lever design does not provide effective fine metering control. Typically this results in over consumption of media. For low-volume blasting using inexpensive media, this may not be an issue.
-
GVDNV100
- HFSTC3 blast coupling included
- Designed for use with coarse metallic abrasives
- Heavy cast iron construction
- Not recommended for use with fine abrasives
- 1 1/2" NPT female thread air connection
- Recommended upgrade: MicroValve 3
GVDNV100- HFSTC3 blast coupling included
- Designed for use with coarse metallic abrasives
- Heavy cast iron construction
- Not recommended for use with fine abrasives
- 1 1/2" NPT female thread air connection
- Recommended upgrade: MicroValve 3
-
Have a good pot that you hate to throw away? The TeraValve™ Complete Blast Pot Retrofit Kit allows you to obtain state-of-the-art pressure-hold abrasive metering technology and save money in the process! Details as follows:
- Your existing pot must be structurally sound and must have at least 6 inches clearance below it.
- The retrofit kit includes a new TeraValve™ as well as all other valves, piping, deadman handle/controls, and hoses required for a complete upgrade.
- Note: Handway and pop-up components are available separately, if needed. In addition, you may want to consider the optional VBS II muffler and/or a union-end ball valve / quick connect (if you have the necessary clearance). See Related Products below.
- Retrofit kits are available in either pneumatic or electric and are offered in both 1-¼" and 1-½" valve sizes.
- Installation instructions are included in the box (and under the Documents tab here). If installation assistance is needed, call us for friendly tech support via phone or we can arrange to have our technicians perform the installation for you.
-
RUBVD223015BlastOne has the parts needed to keep your VertiDrive equipment running. This is the ESCON 70/10 Motor Controller CB4.0.RUBVD223015BlastOne has the parts needed to keep your VertiDrive equipment running. This is the ESCON 70/10 Motor Controller CB4.0.
-
RUBVD113531BlastOne has the parts needed to keep your VertiDrive equipment running. This is the Castor Wheel.RUBVD113531BlastOne has the parts needed to keep your VertiDrive equipment running. This is the Castor Wheel.
-
RUBVD322074BlastOne has the parts needed to keep your Vertidrive equipment running. This is the Gearbox 050 with Flange.RUBVD322074BlastOne has the parts needed to keep your Vertidrive equipment running. This is the Gearbox 050 with Flange.
-
RUBVD422007BlastOne has the parts needed to keep your VertiDrive equipment running. This is the recommended spare parts kit for the V400 and includes the following:
- ESCON 70/10 Motor Controller CCB4.0
- V400 WCS with Connector
- Harting Han-Eco Locking Lever (2)
- Gearbox 050 with Flange
- V400 Motor Assembly
- Relay Module
- Carabine Hook (2)
- Lock Pin SS D10-L40 (2)
- Lock Pin SS D12-L70 (2)
- Wearplate (2)
- Spring (6)
- Spring Holder Nut (12)
- Vacuum Pan Skirt
RUBVD422007BlastOne has the parts needed to keep your VertiDrive equipment running. This is the recommended spare parts kit for the V400 and includes the following:- ESCON 70/10 Motor Controller CCB4.0
- V400 WCS with Connector
- Harting Han-Eco Locking Lever (2)
- Gearbox 050 with Flange
- V400 Motor Assembly
- Relay Module
- Carabine Hook (2)
- Lock Pin SS D10-L40 (2)
- Lock Pin SS D12-L70 (2)
- Wearplate (2)
- Spring (6)
- Spring Holder Nut (12)
- Vacuum Pan Skirt
-
RUBVD322010BlastOne has the parts needed to keep your VertiDrive equipment running. This is the Limit Switch with Connector.RUBVD322010BlastOne has the parts needed to keep your VertiDrive equipment running. This is the Limit Switch with Connector.
-
RUBVD110657BlastOne has the parts needed to keep your VertiDrive equipment running. This is the Harting Han-Eco Locking Lever for the M7.RUBVD110657BlastOne has the parts needed to keep your VertiDrive equipment running. This is the Harting Han-Eco Locking Lever for the M7.
-
VC803300084
BlastOne has the parts needed for your MiniBRS Workheads. This is the Outside Sleeve for flat brushes (MPN 8033-000-84), for both the pneumatic and electric versions.
VC803300084BlastOne has the parts needed for your MiniBRS Workheads. This is the Outside Sleeve for flat brushes (MPN 8033-000-84), for both the pneumatic and electric versions.
Explore our extensive range of blast equipment parts designed to enhance and maintain your blasting operations. From deadman control systems to high-pressure fittings, we provide everything you need to keep your equipment running smoothly and efficiently. Our selection includes durable components like hex pipe nipples, pop-up valves, and hose fittings, ensuring compatibility and high performance. Trust in our products to deliver reliability and safety across all your blasting projects.