My Account
Blast Equipment Parts
Abrasive Metering Valves & Parts
Air Control Valves & Related
Deadman / Control Systems
General Repair Parts for Blast Pots
Internal Pipe (ID) System Components
MistBlaster Specific Parts
Sponge Blast Equipment Parts
Vacuum Blaster Workheads, Parts & Related
VertiDrive Specific Parts
Showing 151–165 of 368 results
-
DMRMCVEBKBlastOne has the parts to maintain your Clemco® blast equipment. This aftermarket rebuild kit for the piston outlet valve (replaces factory part number 01928) includes the following:
- Plug Washers (2)
- Valve Plug
- Compression Spring
- Plug Washer Retainer
NOTE: BlastOne also has retrofit kits with upgraded valves, and which are designed to reduce maintenance while keeping your current pot. For pressure hold retrofit kits, see here. For pressure-release retrofit kits, see here.
DMRMCVEBKBlastOne has the parts to maintain your Clemco® blast equipment. This aftermarket rebuild kit for the piston outlet valve (replaces factory part number 01928) includes the following:
- Plug Washers (2)
- Valve Plug
- Compression Spring
- Plug Washer Retainer
NOTE: BlastOne also has retrofit kits with upgraded valves, and which are designed to reduce maintenance while keeping your current pot. For pressure hold retrofit kits, see here. For pressure-release retrofit kits, see here.
-
DMRMCVIBK
BlastOne has the parts to maintain your Clemco® blast equipment. This is the rebuild kit for the 1-½" inlet valve (replaces factory part number 01927). Includes the following:
- BA01982 Compression Spring, small
- BA01998 Plug Washers (2)
- BA02000 Compression Spring, large
- BA02002 Plug Washer Retainer
- BA02006 Bottom Cap Seal
- BA02007 O-Ring, large
- BA02008 O-Ring, small
If you need the rebuild kit for the 1" inlet valve version, click here.
NOTE: BlastOne also has retrofit kits with upgraded valves, and which are designed to reduce maintenance while keeping your current pot. For pressure hold retrofit kits, see here. For pressure-release kits, see here.
DMRMCVIBKBlastOne has the parts to maintain your Clemco® blast equipment. This is the rebuild kit for the 1-½" inlet valve (replaces factory part number 01927). Includes the following:
- BA01982 Compression Spring, small
- BA01998 Plug Washers (2)
- BA02000 Compression Spring, large
- BA02002 Plug Washer Retainer
- BA02006 Bottom Cap Seal
- BA02007 O-Ring, large
- BA02008 O-Ring, small
If you need the rebuild kit for the 1" inlet valve version, click here.
NOTE: BlastOne also has retrofit kits with upgraded valves, and which are designed to reduce maintenance while keeping your current pot. For pressure hold retrofit kits, see here. For pressure-release kits, see here.
-
Part Number Purchase Price DMWTXEDIODE $12.73 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$12.73
-
-
BA02002BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement plug washer retainer for the remote control valve (factory part number 02002).BA02002BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement plug washer retainer for the remote control valve (factory part number 02002).
-
BAWF8012
- Suits BlastOne MistBlaster Wet/Dry Blasting System
- Used to filter particles out water entering into the pump
- 1/2" FNPT x 1/2" FNPT fittings
- Clear Bowl Strainer Water Filter with Yellow 80 Mesh Filter
- Sold Individually
- Genuine BlastOne Product
BAWF8012- Suits BlastOne MistBlaster Wet/Dry Blasting System
- Used to filter particles out water entering into the pump
- 1/2" FNPT x 1/2" FNPT fittings
- Clear Bowl Strainer Water Filter with Yellow 80 Mesh Filter
- Sold Individually
- Genuine BlastOne Product
-
BA7046003
- Suits Schmidt 3.5 Blast Pot and MistBlaster Secondary Wheel
- 10" Wheel & Tire
- Never Flat, rubber filled tires
- Makes for easy portability onsite
- Sold Individually
- Genuine Parts - Manufactured by Axxiom Manufacturing/Schmidt
BA7046003- Suits Schmidt 3.5 Blast Pot and MistBlaster Secondary Wheel
- 10" Wheel & Tire
- Never Flat, rubber filled tires
- Makes for easy portability onsite
- Sold Individually
- Genuine Parts - Manufactured by Axxiom Manufacturing/Schmidt
-
AFPRGUC200RE
- Suits MistBlaster Blast Machine
- Used to measure the pressure of the blasting and in-coming air
- U-Clamp Panel Mount Gauge
- 2.5" Diameter
- Will measure up to 200 PSI - do not exceed manufacturers recommendation for blast equipment
- Liquid Filled gauge gives you a more steady reading
- Rear Entry gauge
- Sold Individually
AFPRGUC200RE- Suits MistBlaster Blast Machine
- Used to measure the pressure of the blasting and in-coming air
- U-Clamp Panel Mount Gauge
- 2.5" Diameter
- Will measure up to 200 PSI - do not exceed manufacturers recommendation for blast equipment
- Liquid Filled gauge gives you a more steady reading
- Rear Entry gauge
- Sold Individually
Part Number Purchase Price AFPRGUC200RE $72.94 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$72.94
-
-
-
AFREGARG30
- Suits BlastOne Mist Blaster
- Used to regulate the water pressure and pump outflow
- Water Fittings 3/8"
- Regulates pressure up to 125psi
- Sold Individually
AFREGARG30- Suits BlastOne Mist Blaster
- Used to regulate the water pressure and pump outflow
- Water Fittings 3/8"
- Regulates pressure up to 125psi
- Sold Individually
Part Number Purchase Price AFREGARG30 $67.59 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$67.59
-
-
BAMV4P6
- Suits BlastOne MistBlaster
- Used by the operator to select different operation modes
- Dry Blast
- Wet Blast
- Wash Down Mode
- Sold Individually, does include the 4" handle which is not pictured
- Genuine Long-Lasting product
BAMV4P6- Suits BlastOne MistBlaster
- Used by the operator to select different operation modes
- Dry Blast
- Wet Blast
- Wash Down Mode
- Sold Individually, does include the 4" handle which is not pictured
- Genuine Long-Lasting product
-
BAUT50G
- Used to store water for use when Wet Blasting
- Often used with the MistBlaster and AirPrep Combination Skid
- Holds up to 50 Gallons
- Mist Blaster uses 1 pint of water per minute when blasting. Should support about 6 hours of wet blasting (not in washdown mode)
- Easy to remove lid for refilling
- Sold Individually
- Genuine BlastOne Product
BAUT50G- Used to store water for use when Wet Blasting
- Often used with the MistBlaster and AirPrep Combination Skid
- Holds up to 50 Gallons
- Mist Blaster uses 1 pint of water per minute when blasting. Should support about 6 hours of wet blasting (not in washdown mode)
- Easy to remove lid for refilling
- Sold Individually
- Genuine BlastOne Product
-
The latest innovation in deadman safety technology from Axxiom is the BAABS (Blasting Accessories and Assist Bracket System). Intended to be the safest deadman on the market, it mechanically prevents inadvertent activation. The Schmidt BAABS deadman is such a leap forward in safety technology that Axxiom provides them as standard equipment with most new blast pot or valve retrofit purchases.*
All BAABS use the Axxiom G3 trigger deadman configurable as either electric or pneumatic.
All BAABS units are capable of being fitted with the BAABS blast light for improved vision in dim or dusty environments. (Note: When the light is used with the Subcompact BAABS, there is not room for the thrust brace.)
*The standard configuration provided with new equipment is the Compact size. See Product Description tab for all size options.
-
VCBV500
- Walk-behind vacuum blasting head
- Will Blast a 4″ wide blast strip – widest of any blast and vac workhead
- Nozzle size: No.6 (⅜”)
- Blasting rate: up to 64 ft²/6 m² per hour.
- Compressed air requirement: 500 cfm.
- Surface preparation standards compliance capability: up to SA 3 / SSPC-SP-5 / NACE No. 1.
- Achievable surface profile: 110 µm, depending on blast pressure, grit size, and surface.
- Noise level: 89 dB at 1m distance.
- Mounted with Wheels, making it easy to maneuver
- Has replaceable rubber lining and brushes.
- Genuine Parts – Manufactured by Pinovo in Norway
VCBV500- Walk-behind vacuum blasting head
- Will Blast a 4″ wide blast strip – widest of any blast and vac workhead
- Nozzle size: No.6 (⅜”)
- Blasting rate: up to 64 ft²/6 m² per hour.
- Compressed air requirement: 500 cfm.
- Surface preparation standards compliance capability: up to SA 3 / SSPC-SP-5 / NACE No. 1.
- Achievable surface profile: 110 µm, depending on blast pressure, grit size, and surface.
- Noise level: 89 dB at 1m distance.
- Mounted with Wheels, making it easy to maneuver
- Has replaceable rubber lining and brushes.
- Genuine Parts – Manufactured by Pinovo in Norway
Part Number Purchase Price VCBV500 $17,181.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$17,181.00
-
-
IPC1200
- Fits to IPC1000 as one assembly (outlined in red in image)
- Suitable for pipes between 8" and 36" in diameter
- Consists of 2 collars, 3 two-wheel roller bars and 4 sets of centering legs (6 legs per set)
IPC1200- Fits to IPC1000 as one assembly (outlined in red in image)
- Suitable for pipes between 8" and 36" in diameter
- Consists of 2 collars, 3 two-wheel roller bars and 4 sets of centering legs (6 legs per set)
-
VCBV700
- The PiPoint is the smallest hand-held vacuum blasting tool.
- Has 8 interchangeable heads providing flexibility for different job requirements.
- Allows you to blast inside a small box web beam, etc.
- Nozzle size: No.6 (⅜”)
- Blasting rate: up to 6 ft²/0.6 m² per hour.
- Compressed air requirement: 250 cfm.
- Surface preparation standards compliance capability: up to SA 3 / SSPC-SP-5 / NACE No. 1.
- Achievable surface profile: 110 µm, depending on blast pressure, grit size, and surface.
- Noise level: 89 dB at 1m distance.
- Genuine Parts – Manufactured by Pinovo in Norway
VCBV700- The PiPoint is the smallest hand-held vacuum blasting tool.
- Has 8 interchangeable heads providing flexibility for different job requirements.
- Allows you to blast inside a small box web beam, etc.
- Nozzle size: No.6 (⅜”)
- Blasting rate: up to 6 ft²/0.6 m² per hour.
- Compressed air requirement: 250 cfm.
- Surface preparation standards compliance capability: up to SA 3 / SSPC-SP-5 / NACE No. 1.
- Achievable surface profile: 110 µm, depending on blast pressure, grit size, and surface.
- Noise level: 89 dB at 1m distance.
- Genuine Parts – Manufactured by Pinovo in Norway
Explore our extensive range of blast equipment parts designed to enhance and maintain your blasting operations. From deadman control systems to high-pressure fittings, we provide everything you need to keep your equipment running smoothly and efficiently. Our selection includes durable components like hex pipe nipples, pop-up valves, and hose fittings, ensuring compatibility and high performance. Trust in our products to deliver reliability and safety across all your blasting projects.
