My Account
Blast Equipment Parts
Abrasive Metering Valves & Parts
Air Control Valves & Related
Deadman / Control Systems
General Repair Parts for Blast Pots
Internal Pipe (ID) System Components
MistBlaster Specific Parts
Sponge Blast Equipment Parts
Vacuum Blaster Workheads, Parts & Related
VertiDrive Specific Parts
Showing 136–150 of 357 results
-
IPC1200- Fits to IPC1000 as one assembly (outlined in red in image)
- Suitable for pipes between 8" and 36" in diameter
- Consists of 2 collars, 3 two-wheel roller bars and 4 sets of centering legs (6 legs per set)
IPC1200- Fits to IPC1000 as one assembly (outlined in red in image)
- Suitable for pipes between 8" and 36" in diameter
- Consists of 2 collars, 3 two-wheel roller bars and 4 sets of centering legs (6 legs per set)
-
VCBV700- The PiPoint is the smallest hand-held vacuum blasting tool.
- Has 8 interchangeable heads providing flexibility for different job requirements.
- Allows you to blast inside a small box web beam, etc.
- Nozzle size: No.6 (⅜”)
- Blasting rate: up to 6 ft²/0.6 m² per hour.
- Compressed air requirement: 250 cfm.
- Surface preparation standards compliance capability: up to SA 3 / SSPC-SP-5 / NACE No. 1.
- Achievable surface profile: 110 µm, depending on blast pressure, grit size, and surface.
- Noise level: 89 dB at 1m distance.
- Genuine Parts – Manufactured by Pinovo in Norway
VCBV700- The PiPoint is the smallest hand-held vacuum blasting tool.
- Has 8 interchangeable heads providing flexibility for different job requirements.
- Allows you to blast inside a small box web beam, etc.
- Nozzle size: No.6 (⅜”)
- Blasting rate: up to 6 ft²/0.6 m² per hour.
- Compressed air requirement: 250 cfm.
- Surface preparation standards compliance capability: up to SA 3 / SSPC-SP-5 / NACE No. 1.
- Achievable surface profile: 110 µm, depending on blast pressure, grit size, and surface.
- Noise level: 89 dB at 1m distance.
- Genuine Parts – Manufactured by Pinovo in Norway
-
VCBV600
- A lightweight closed-circuit vacuum blaster with interchangeable heads.
- Edge blasting tools.
- Nozzle size: No.6 (⅜”)
- Blasting rate: up to 27 ft²/2.5 m² per hour.
- Compressed air requirement: 320 cfm.
- Surface preparation standards compliance capability: up to SA 3 / SSPC-SP-5 / NACE No. 1.
- Genuine Parts - Manufactured by Pinovo in Norway.
- Limited availability in the USA - Request a quote/express interest.
VCBV600- A lightweight closed-circuit vacuum blaster with interchangeable heads.
- Edge blasting tools.
- Nozzle size: No.6 (⅜”)
- Blasting rate: up to 27 ft²/2.5 m² per hour.
- Compressed air requirement: 320 cfm.
- Surface preparation standards compliance capability: up to SA 3 / SSPC-SP-5 / NACE No. 1.
- Genuine Parts - Manufactured by Pinovo in Norway.
- Limited availability in the USA - Request a quote/express interest.
-
DMAAVSR12
- Suits MistBlaster
- Used to control the water flow to the nozzle, via the injector block
- Air Actuated 2-Way Valve
- SS T-Port Ball Valve 1/2", Spring Return
- Mist Blaster requires 2 Valves
- Sold Individually
DMAAVSR12- Suits MistBlaster
- Used to control the water flow to the nozzle, via the injector block
- Air Actuated 2-Way Valve
- SS T-Port Ball Valve 1/2", Spring Return
- Mist Blaster requires 2 Valves
- Sold Individually
-
APFAF0MP
- Suits MistBlaster Wet/Dry Blast Machine
- Filters all incoming air that is going to the pneumatic control lines
- Ensures no moisture, dust or particles causes any issues in the control valves
- 3/8" High Flow Air Valve
- Sold Individually
APFAF0MP- Suits MistBlaster Wet/Dry Blast Machine
- Filters all incoming air that is going to the pneumatic control lines
- Ensures no moisture, dust or particles causes any issues in the control valves
- 3/8" High Flow Air Valve
- Sold Individually
-
DMECKCLIP
- Heavy-Duty Battery Charging Clamps - Bare
- Insulated Vinyl handles for your safety
- 80 Amp capacity, suits 12/24V DC batteries
- 14 to 18 AWG
- Sold as a pair - Black/Red
DMECKCLIP- Heavy-Duty Battery Charging Clamps - Bare
- Insulated Vinyl handles for your safety
- 80 Amp capacity, suits 12/24V DC batteries
- 14 to 18 AWG
- Sold as a pair - Black/Red
-
LRFSVAT2000
- Suited for the VacuLoad 1 - Skid Mounted Vacuum System
- Acts as a control valve to automatically manage frequency of dust cartridge pulses
- Helps extend life of dust collection cartridge
- Sold individually
LRFSVAT2000- Suited for the VacuLoad 1 - Skid Mounted Vacuum System
- Acts as a control valve to automatically manage frequency of dust cartridge pulses
- Helps extend life of dust collection cartridge
- Sold individually
Part Number Purchase Price LRFSVAT2000 $142.65 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$142.65
-
-
DMWTX1002KLBALL AND CHAIN SOLD SEPARATELY
- Increases productivity and reduces costs
- Permanently sealed pneumatic switch is protected by abrasion-resistant urethane
DMWTX1002KLBALL AND CHAIN SOLD SEPARATELY- Increases productivity and reduces costs
- Permanently sealed pneumatic switch is protected by abrasion-resistant urethane
Part Number Purchase Price DMWTX1002KL $370.51 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$370.51
-
-
DM212300999
- Service Kit for the 1-½ High flow and 2" Auto Air Valve
- Used to rebuild the Auto Air Valve in the field
- Includes Gaskets, Diaphragm, Brass Washers, Breather vent and required lubricants
- Replace seals at the first sign of wear
DM212300999- Service Kit for the 1-½ High flow and 2" Auto Air Valve
- Used to rebuild the Auto Air Valve in the field
- Includes Gaskets, Diaphragm, Brass Washers, Breather vent and required lubricants
- Replace seals at the first sign of wear
Part Number Purchase Price DM212300999 $54.21 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$54.21
-
-
DM227000015PKWhen your BAABS Deadman system needs refreshed, we have the replacement parts you need. This is a pack of 4 of the thread forming screws used in the handle. Other individual components are also available. See the Repair Parts tab on the main BAABS page here.DM227000015PKWhen your BAABS Deadman system needs refreshed, we have the replacement parts you need. This is a pack of 4 of the thread forming screws used in the handle. Other individual components are also available. See the Repair Parts tab on the main BAABS page here.
Part Number Purchase Price DM227000015PK $15.45 G3 Trigger Deadman Parts: Thread forming screws for G3 Handle
Part #DM227000015PK
View Product DetailsWeb price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$15.45
-
-
DMRMS1001Service repair kit includes seals, gaskets, etc. to service both the inlet and the exhaust valveDMRMS1001Service repair kit includes seals, gaskets, etc. to service both the inlet and the exhaust valve
-
DMRGN1013
- Suits Bleeder style pneumatic remote control handle (DM RGN1000)
- Mushroom shaped
- Sold in 10 pack
DMRGN1013- Suits Bleeder style pneumatic remote control handle (DM RGN1000)
- Mushroom shaped
- Sold in 10 pack
-
BA01989BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement bottom cap seal for the inlet valve (factory part number 01989).BA01989BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement bottom cap seal for the inlet valve (factory part number 01989).
-
DMRMCATCSBlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement screen for 1" abrasive trap (factory part number 02012) and it is also included in the applicable service kit available here.DMRMCATCSBlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement screen for 1" abrasive trap (factory part number 02012) and it is also included in the applicable service kit available here.
-
DMRMS1002
- Optional service repair kit also includes exhaust deflector plate and gasket
DMRMS1002- Optional service repair kit also includes exhaust deflector plate and gasket
Explore our extensive range of blast equipment parts designed to enhance and maintain your blasting operations. From deadman control systems to high-pressure fittings, we provide everything you need to keep your equipment running smoothly and efficiently. Our selection includes durable components like hex pipe nipples, pop-up valves, and hose fittings, ensuring compatibility and high performance. Trust in our products to deliver reliability and safety across all your blasting projects.