My Account
Deadman / Control Systems
Deadman Handles
Deadman Parts / Control Systems
Abrasive Metering Valves & Parts
Air Control Valves & Related
General Repair Parts for Blast Pots
Internal Pipe (ID) System Components
MistBlaster Specific Parts
Sponge Blast Equipment Parts
Vacuum Blaster Workheads, Parts & Related
VertiDrive Specific Parts
Showing 61–75 of 102 results
-
DMRMCVIBKBlastOne has the parts to maintain your Clemco® blast equipment. This is the rebuild kit for the 1-½" inlet valve (replaces factory part number 01927). Includes the following:
- BA01982 Compression Spring, small
- BA01998 Plug Washers (2)
- BA02000 Compression Spring, large
- BA02002 Plug Washer Retainer
- BA02006 Bottom Cap Seal
- BA02007 O-Ring, large
- BA02008 O-Ring, small
If you need the rebuild kit for the 1" inlet valve version, click here.
NOTE: BlastOne also has retrofit kits with upgraded valves, and which are designed to reduce maintenance while keeping your current pot. For pressure hold retrofit kits, see here. For pressure-release kits, see here.
DMRMCVIBKBlastOne has the parts to maintain your Clemco® blast equipment. This is the rebuild kit for the 1-½" inlet valve (replaces factory part number 01927). Includes the following:
- BA01982 Compression Spring, small
- BA01998 Plug Washers (2)
- BA02000 Compression Spring, large
- BA02002 Plug Washer Retainer
- BA02006 Bottom Cap Seal
- BA02007 O-Ring, large
- BA02008 O-Ring, small
If you need the rebuild kit for the 1" inlet valve version, click here.
NOTE: BlastOne also has retrofit kits with upgraded valves, and which are designed to reduce maintenance while keeping your current pot. For pressure hold retrofit kits, see here. For pressure-release kits, see here.
-
Part Number Purchase Price DMWTXEDIODE $12.73 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$12.73
-
-
BA02002BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement plug washer retainer for the remote control valve (factory part number 02002).BA02002BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement plug washer retainer for the remote control valve (factory part number 02002).
-
DMECKCLIP
- Heavy-Duty Battery Charging Clamps - Bare
- Insulated Vinyl handles for your safety
- 80 Amp capacity, suits 12/24V DC batteries
- 14 to 18 AWG
- Sold as a pair - Black/Red
DMECKCLIP- Heavy-Duty Battery Charging Clamps - Bare
- Insulated Vinyl handles for your safety
- 80 Amp capacity, suits 12/24V DC batteries
- 14 to 18 AWG
- Sold as a pair - Black/Red
-
DMWTX1002KLBALL AND CHAIN SOLD SEPARATELY
- Increases productivity and reduces costs
- Permanently sealed pneumatic switch is protected by abrasion-resistant urethane
DMWTX1002KLBALL AND CHAIN SOLD SEPARATELY- Increases productivity and reduces costs
- Permanently sealed pneumatic switch is protected by abrasion-resistant urethane
Part Number Purchase Price DMWTX1002KL $370.51 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$370.51
-
-
DM227000015PKWhen your BAABS Deadman system needs refreshed, we have the replacement parts you need. This is a pack of 4 of the thread forming screws used in the handle. Other individual components are also available. See the Repair Parts tab on the main BAABS page here.DM227000015PKWhen your BAABS Deadman system needs refreshed, we have the replacement parts you need. This is a pack of 4 of the thread forming screws used in the handle. Other individual components are also available. See the Repair Parts tab on the main BAABS page here.
Part Number Purchase Price DM227000015PK $15.45 G3 Trigger Deadman Parts: Thread forming screws for G3 Handle
Part #DM227000015PK
View Product DetailsWeb price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$15.45
-
-
DMRMS1001Service repair kit includes seals, gaskets, etc. to service both the inlet and the exhaust valveDMRMS1001Service repair kit includes seals, gaskets, etc. to service both the inlet and the exhaust valve
-
DMRGN1013
- Suits Bleeder style pneumatic remote control handle (DM RGN1000)
- Mushroom shaped
- Sold in 10 pack
DMRGN1013- Suits Bleeder style pneumatic remote control handle (DM RGN1000)
- Mushroom shaped
- Sold in 10 pack
-
DMRMCATCSBlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement screen for 1" abrasive trap (factory part number 02012) and it is also included in the applicable service kit available here.DMRMCATCSBlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement screen for 1" abrasive trap (factory part number 02012) and it is also included in the applicable service kit available here.
-
DMRMS1002
- Optional service repair kit also includes exhaust deflector plate and gasket
DMRMS1002- Optional service repair kit also includes exhaust deflector plate and gasket
-
DM229100KIT
- Conversion kit for DM2229100 Electric Control Valve
- Installs between twinline and inlet valve
- Provides sharp, clean and rapid deadman response
- Improves safety
- Reduces wear on both the remote control exhaust valve and the abrasive metering valve
DM229100KIT- Conversion kit for DM2229100 Electric Control Valve
- Installs between twinline and inlet valve
- Provides sharp, clean and rapid deadman response
- Improves safety
- Reduces wear on both the remote control exhaust valve and the abrasive metering valve
Part Number Purchase Price DM229100KIT $417.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$417.00
-
-
Convert your Pneumatic Blast Pots to Electric Deadman Systems seamlessly with the Pneumatic to Electric Deadman Blast Pot Conversion Kit (SKU: P-DMECK). Ideal for setups with over 100ft of blast hose. Kit includes connector box, battery cable, and more.
- Pneumatic to Electric Deadman Blast Pot Conversion Kit
- Used to convert Pneumatic Blast Pots over to Electric Deadman Systems
- Electric Deadman should be used on any set ups running over 100ft of blast hose
- Sold as a Conversion Kits including;
- Connector Box
- 16 feet battery cable with alligator clips
- Response electric remote control handle
- 55 feet deadman cable
- TwistLok plug connector
- Energy consumption rate of 8 watts per control valve
- Assembled by Qualified BlastOne Technicians
-
AVAILABLE FOR RENTAL OR PURCHASE
- Abrasion-resistant, flex-coated control cable
- 12 Volt rated for electric deadman controls
- 3-Pin Twistlock connectors used for all deadman cables
- 2-wire is used for Battery connections only
- Optional heavy duty cable for use with steel grit or other high wear areas
- Please Request Rental Pricing
-
DMWTX1102
- Replacement ball and chain for Western Tech™ remote control handle
- Operator must use as per instruction manual
- Sold Individually
DMWTX1102- Replacement ball and chain for Western Tech™ remote control handle
- Operator must use as per instruction manual
- Sold Individually
-
AHRMS4055AVAILABLE FOR RENTAL OR PURCHASE The "Twin line Deadman Control Hose" (SKU: AHRMS4055) offers a safe, heavy-duty solution for pneumatic deadman controls. Bonded and color-coded for enhanced safety, it is available for rental or purchase.
- Bonded, heavy duty, twin rubber hose, color coded for safety
- Used to supply air to the deadman handle which is used to signal a "blast" return charge of air to the blast pot control valves
- Always replace the hose at the first sign of wear, this is a safety deadman control item.
- Fitted standard with male-female threaded connectors
- 1/4" (6 mm) connectors on 'supply' red hose
- 1/8" (3 mm) connectors on 'return' green hose
- 55 ft length
- Please Request Rental Pricing
AHRMS4055AVAILABLE FOR RENTAL OR PURCHASE The "Twin line Deadman Control Hose" (SKU: AHRMS4055) offers a safe, heavy-duty solution for pneumatic deadman controls. Bonded and color-coded for enhanced safety, it is available for rental or purchase.- Bonded, heavy duty, twin rubber hose, color coded for safety
- Used to supply air to the deadman handle which is used to signal a "blast" return charge of air to the blast pot control valves
- Always replace the hose at the first sign of wear, this is a safety deadman control item.
- Fitted standard with male-female threaded connectors
- 1/4" (6 mm) connectors on 'supply' red hose
- 1/8" (3 mm) connectors on 'return' green hose
- 55 ft length
- Please Request Rental Pricing
Discover our extensive range of Deadman and control systems designed to enhance safety and efficiency in your blasting operations. Our selection includes advanced solutions like the SmartSPARK Short Proof Deadman Control System, various remote control handles, and upgrade kits for existing systems. Each product is engineered for reliability and ease of use, ensuring optimal performance in demanding industrial environments. Enhance operator safety and streamline your blasting processes with our high-quality control systems and accessories.