My Account
Deadman / Control Systems
Deadman Handles
Deadman Parts / Control Systems
Abrasive Metering Valves & Parts
Air Control Valves & Related
General Repair Parts for Blast Pots
Internal Pipe (ID) System Components
MistBlaster Specific Parts
Sponge Blast Equipment Parts
Vacuum Blaster Workheads, Parts & Related
VertiDrive Specific Parts
Showing 16–30 of 105 results
-
DMBB450000027While Schmidt developed this tough blast nozzle light as an accessory for their proprietary BAABS deadman system, it can be used with ANY 12v control system. It attaches easily to any BAABS rail base, although when using on the sub-compact version the thrust brace would need to be removed. With over 830 lumens, this LED low-voltage (12/24v) blast light is economical, field serviceable, and lightweight. The ingenious tear-off lens is produced in a tabbed stack of 5 and replacement stacks are readily available (see You May Also Like below)
DMBB450000027While Schmidt developed this tough blast nozzle light as an accessory for their proprietary BAABS deadman system, it can be used with ANY 12v control system. It attaches easily to any BAABS rail base, although when using on the sub-compact version the thrust brace would need to be removed. With over 830 lumens, this LED low-voltage (12/24v) blast light is economical, field serviceable, and lightweight. The ingenious tear-off lens is produced in a tabbed stack of 5 and replacement stacks are readily available (see You May Also Like below)
Part Number Purchase Price DMBB450000027 $499.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$499.00
-
-
DMBB450000037
BlastOne has the parts to maintain your Axxiom / Schmidt blast equipment. This Tear-Off 5-Lens tabbed set for the BAABS Blast Light is an ingenious way to both protect the outer lens AND maintain visibility while blasting. MPN: 4500-000-37
DMBB450000037BlastOne has the parts to maintain your Axxiom / Schmidt blast equipment. This Tear-Off 5-Lens tabbed set for the BAABS Blast Light is an ingenious way to both protect the outer lens AND maintain visibility while blasting. MPN: 4500-000-37
Part Number Purchase Price DMBB450000037 $10.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$10.00
-
-
DMBB450000029
BlastOne has the parts to maintain your Axxiom / Schmidt blast equipment. This is the replacement housing for the BAABS blast light. MPN: 4500-000-29
DMBB450000029BlastOne has the parts to maintain your Axxiom / Schmidt blast equipment. This is the replacement housing for the BAABS blast light. MPN: 4500-000-29
Part Number Purchase Price DMBB450000029 $19.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$19.00
-
-
DMBB450000030
BlastOne has the parts to maintain your Axxiom / Schmidt blast equipment. This is the outer lens cover, a replacement part available for the BAABS blast light. MPN: 4500-000-30
DMBB450000030BlastOne has the parts to maintain your Axxiom / Schmidt blast equipment. This is the outer lens cover, a replacement part available for the BAABS blast light. MPN: 4500-000-30
Part Number Purchase Price DMBB450000030 $16.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$16.00
-
-
DMBB450000036
BlastOne has the parts to maintain your Axxiom / Schmidt blast equipment. This is the replacement lens for the BAABS Blast light. MPN: 4500-000-36
DMBB450000036BlastOne has the parts to maintain your Axxiom / Schmidt blast equipment. This is the replacement lens for the BAABS Blast light. MPN: 4500-000-36
Part Number Purchase Price DMBB450000036 $43.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$43.00
-
-
DMBB450000044BlastOne has the parts to maintain your Axxiom / Schmidt blast equipment. This is the replacement adapter assembly used to connect the BAABS blast light to the BAABS rail. MPN: 4500-000-44DMBB450000044BlastOne has the parts to maintain your Axxiom / Schmidt blast equipment. This is the replacement adapter assembly used to connect the BAABS blast light to the BAABS rail. MPN: 4500-000-44
Part Number Purchase Price DMBB450000044 $34.00Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$34.00
-
-
- Premium Deadman Technology
- Comfortable to hold - increases operator compliance
- Available as Electric or Pneumatic in 2 configurations each:
- 2-position (on/off) version
- 3-position version with the following:
- Position 1 - Air Off / Abrasive Off
- Position 2 - Air On / Abrasive Off (for blowing off)
- Position 3 - Air On / Abrasive On (for blasting)
- This handle can be used with any blast control setup, but comes standard with each new BAABS deadman system purchase - see here for the main BAABS page.
- Genuine Products - Manufactured by Schmidt / Axxiom Manufacturing
-
DMECK3999- Abrasion resistant, flex coated control cable
- Designed to clip onto your battery and connect to your electric deadman control box
- Powers your deadman system from your compressor or any other 12v available battery.
DMECK3999- Abrasion resistant, flex coated control cable
- Designed to clip onto your battery and connect to your electric deadman control box
- Powers your deadman system from your compressor or any other 12v available battery.
-
DMRGNE2000PC
- Large blade design
- 12 Volt or 24 volt electric operation
- Unit supplied with 12" (300mm) short cable
- Comes with TwistLok plug
DMRGNE2000PC- Large blade design
- 12 Volt or 24 volt electric operation
- Unit supplied with 12" (300mm) short cable
- Comes with TwistLok plug
Part Number Purchase Price DMRGNE2000PC $195.51 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$195.51
-
-
DMRGN1000
- Conventional bleeder-type deadman control handle
- 1/4" (6mm) (supply) x 1/8" (3mm) (return) threaded connectors
- Large lever design
- Use only with equipment designed for bleeder-style handles - DO NOT use with Combo or Thompson Valves
DMRGN1000- Conventional bleeder-type deadman control handle
- 1/4" (6mm) (supply) x 1/8" (3mm) (return) threaded connectors
- Large lever design
- Use only with equipment designed for bleeder-style handles - DO NOT use with Combo or Thompson Valves
-
DMRGNE2000
- Large blade design
- 12 Volt or 24 Volt electric operation
- Unit supplied with 12" (300 mm) short cable
- Order TwistLok plug and/or extension cable separately
- Clamps not included
DMRGNE2000- Large blade design
- 12 Volt or 24 Volt electric operation
- Unit supplied with 12" (300 mm) short cable
- Order TwistLok plug and/or extension cable separately
- Clamps not included
Part Number Purchase Price DMRGNE2000 $229.99 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$229.99
-
-
DMRMCATCKBlastOne has the parts to maintain your Clemco® blast equipment. This is the rebuild kit for 1" abrasive trap on the RMC valve (factory part number 01925). Includes the following:
- DMRMCATCS Abrasive Trap Screen (3)
- BA02013 O-Ring (2)
- Clean Screen Decal (Not available separately)
- DMRMCATCSG Gasket
DMRMCATCKBlastOne has the parts to maintain your Clemco® blast equipment. This is the rebuild kit for 1" abrasive trap on the RMC valve (factory part number 01925). Includes the following:- DMRMCATCS Abrasive Trap Screen (3)
- BA02013 O-Ring (2)
- Clean Screen Decal (Not available separately)
- DMRMCATCSG Gasket
-
Part Number Purchase Price DM222300002 $27.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$27.00
-
-
DMMEM200
- Pop-top design, self cleaning
- Installs upright
- 1" (25mm) male thread connection
DMMEM200- Pop-top design, self cleaning
- Installs upright
- 1" (25mm) male thread connection
-
DM2263001
- Pneumatically operated via twinline hoses
- Compatible with all twinline pneumatic remote control systems
- 1/4" and 1/8" air supply threaded connectors
- Operate by pulling down the safety flap and hold the large handle down
DM2263001- Pneumatically operated via twinline hoses
- Compatible with all twinline pneumatic remote control systems
- 1/4" and 1/8" air supply threaded connectors
- Operate by pulling down the safety flap and hold the large handle down
Discover our extensive range of Deadman and control systems designed to enhance safety and efficiency in your blasting operations. Our selection includes advanced solutions like the SmartSPARK Short Proof Deadman Control System, various remote control handles, and upgrade kits for existing systems. Each product is engineered for reliability and ease of use, ensuring optimal performance in demanding industrial environments. Enhance operator safety and streamline your blasting processes with our high-quality control systems and accessories.
