My Account
Blast Equipment
SANDBLASTING MACHINES, EQUIPMENT, WET BLAST SYSTEMS, POTS & ABRASIVE GRIT BLASTING EQUIPMENT
BlastOne has a complete range of sandblasting machines and equipment to suit all your projects & applications. Read our Article to help choose what is for you Blast Machine Equipment Buying Guide From Large to Small Bulk Pots, Mega Blasters, Wet, Slurry, Vapor, Wet, Soda, Standard Blast Pots, Hoppers, Sandblasting Systems & Equipment, Industrial, Ecoquip, Amphi-blasters, Ibix 25 & Ibix 40 Portable & Commercial Grit Equipment. Specialist sandblasting machines and equipment for blasting the internal & externals of pipes, Bulk Tanks for shipyards, and packaged abrasive blasting & air-driers for use on offshore oil & gas platforms, BlastOne has the complete solution, as a leading abrasive sandblasting equipment & grit abrasive supplier. BlastOne has what you need at a convenient location near you. When you need something from large or small, BlastOne is your partner.
Wet & Dry Pots
Small Portable Blast Pots
Specialty Contractor Pots
Robotic / VertiDrive UHP Equipment
Internal Pipe (ID) Systems
Mega Bulk Blasters
Track Blasters
Showing 1–15 of 80 results
-
Clemco Industries is the world's largest manufacturer of air-powered blasting equipment. It is over 80 years old, being founded in 1941.
The Classic line from Clemco is the original design and offers the largest size selection. This section includes the highly portable 3 cubic foot 1648 series. Similar to the 6 CF Clemco Classic Blast Machines, these smaller units (16" diameter) offer the following:
- Pneumatic controls with separate inlet & outlet valves (electric controls offered on the Contractor series or by special quote only)
- Choice of pressure-release or pressure hold
- Choice of metering valves including FSV, MQV, AQV, GW
- Pots with controls only, OR packages including accessories such as Apollo 600 respirators, blast hose & nozzles, breathing air system (minus the CO monitor, available separately) and more
-
Clemco Industries is the world's largest manufacturer of air-powered blasting equipment. It is over 80 years old, being founded in 1941.
Clemco offers two series of blast machines - the Classic and the Contractor. While both are designed for industrial applications, there are a few primary differences which are shown in the table below:
Classic Series #2452 Contractor Series #2024 Controls Pneumatic standard. Electric only by special quote. Pneumatic or Electric Control Valves Separate Inlet / Outlet valves. Millennium (combination inlet/outlet) Design Highlights Portable w/2 wheels. Improved portability (4 wheels) and protection (built-in tube steel handles around valves). Built-in storage for manuals. Improved access to hose fittings. Other features, such as pressure-hold or pressure-release deadmans, accessory packages, etc. are available on either series.
The economy Classic 6 cubic foot pot with the FSV (flat sand valve) is the best-selling Clemco blast pot. The Contractor series offers more time saving and protection features.
-
Clemco offers a wide range of equipment that provides high-efficiency 360-degree cleaning for pipe interiors. Suitable for industrial applications, these tools are capable of providing precise and effective surface preparation.
The two Hollo-Blast unit versions function essentially as nozzles, and work by utilizing a deflection tip at the end of the orifice. The tip deflects the abrasive into a 360° pattern. They are designed for pipes ranging from only ¾" - 2" ID (Junior Series) to 2" to 12" ID (standard Hollo-Blast Series). Larger ID pipe can also be done, but with a different series of equipment. Optional centering carriages are also available, adding efficiency and consistency to the blast.
Internal Pipe blasting is a specialized process involving high wear on certain components. BlastOne's technical staff is available to assist with your questions.
-
CAPSG02641
How can you abrasive blast without a blast pot? With a Clemco suction gun! At a fraction of the cost of a regular blast pot setup, the Clemco SG300 suction gun offers easy portability and can blast with as little as 12 CFM at 40 PSI using the included 1/8" air jet and #5 nozzle. If more CFM / PSI are available, a different air jet / nozzle configuration could improve production speed. The Suction Blaster is intended for small projects / touch-up work, etc. It is not as fast as blasting with a regular blast pot.
CAPSG02641How can you abrasive blast without a blast pot? With a Clemco suction gun! At a fraction of the cost of a regular blast pot setup, the Clemco SG300 suction gun offers easy portability and can blast with as little as 12 CFM at 40 PSI using the included 1/8" air jet and #5 nozzle. If more CFM / PSI are available, a different air jet / nozzle configuration could improve production speed. The Suction Blaster is intended for small projects / touch-up work, etc. It is not as fast as blasting with a regular blast pot.
Part Number Purchase Price CAPSG02641 $845.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$845.00
-
-
FREE Shipping
30 Day Money-Back Guarantee|Free Returns
90 Day Manufacturer Warranty
- Most common contractor size, combining portability with productivity
- When using premium garnet media, this pot will blast for around 1.5 hours before you need to refill
- Capacity of 6.5 cu ft, which equates to 950lbs of a dense media like premium GMA Garnet
- Pressure Rating: 150psi
- Blast Pot Deadman Control System with 50 feet of control line and handle
- Choice of inlet fitting in either 4-claw or Spud type. Spud will be supplied unless otherwise noted in Order Comments field
-
Our latest generation Mega MistBlaster offers both wet and dry blasting for the ultimate in flexibility! It reduces costs and time when doing large projects and offers the following:
- Versatility. 4 functions available at the flip of a switch:
- MistBlasting / Wet (slurry) Blasting
- Traditional Dry Blasting
- Wash-down mode
- Blow-off mode
- Each outlet is independently controlled, giving even greater versatility.
- Capability. With its 4 outlets, this workhorse can power up to 4 operators OR a VertiDrive robotic blaster and manual blasting simultaneously.
- Huge capacity - As typically configured with 160 cubic feet (aka 8 Ton), this bulk pot holds half a truckload of garnet.
- Mount Options as follows:
- Highway Trailer
- Skid Mount
- Shipping Legs (for mounting on your own equipment)
- Available Cost Saving Option - We can convert your existing Schmidt® Dry bulk pot with to our Mega MistBlaster with our retrofit package. Available as a Limited version (without metering / air valves, for new pots) or as a Full version (with all valves, for used pots).
- Versatility. 4 functions available at the flip of a switch:
-
FREE Shipping 30 Day Money-Back Guarantee | Free Returns 90 Day Manufacturer Warranty
- Compact contractor size, highly portable with good productivity for smaller projects
- When using premium garnet media, this pot will last for up to 1 hour before you need to refill
- Capacity of 3.5 cu ft, which equates to about 500 pounds of dense media like premium GMA garnet
- Pressure Rating: 150psi
- Blast Pot
- Deadman Control System with 50 feet of control line and handle
- Choice of inlet fitting in either 4-claw or Spud type. Spud will be supplied unless otherwise noted in order comments field.
-
BMS1001TVFREE Shipping 30 Day Money-Back Guarantee | Free Returns 90 Manufacturer Warranty
- 10 cu ft Schmidt® Blast pot
- Excellent for a blastroom application with 1-2 blasters
- Single outlet Thompson® Valve II abrasive metering valve, Dual available
- Abrasive capacity
- Garnet 1500 lbs
- Steel Grit 2450 lbs
- Comes with pneumatic deadman handle and 55ft of control hose, Electric available
BMS1001TVFREE Shipping 30 Day Money-Back Guarantee | Free Returns 90 Manufacturer Warranty- 10 cu ft Schmidt® Blast pot
- Excellent for a blastroom application with 1-2 blasters
- Single outlet Thompson® Valve II abrasive metering valve, Dual available
- Abrasive capacity
- Garnet 1500 lbs
- Steel Grit 2450 lbs
- Comes with pneumatic deadman handle and 55ft of control hose, Electric available
Part Number Purchase Price BMS1001TV Request Quote Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.Request Quote
-
-
BMS1102TERAFREE Shipping 30 Day Money-Back Guarantee | Free Returns 90 Day Manufacturer Warranty
- Unique! Dual Outlet for 2 operators, in a short configuration for easy loading.
- Only 46 inches tall! Shorter than a standard 6.5 pot.
- Capacity of 11 cu ft, which equates to 1600lbs of a dense media like premium GMA Garnet
- Pressure Rating: 150psi
- TeraValve pressure-hold metering valves
- Blast Pot
- Pneumatic Deadman Control System comes with 2 sets of 50 feet of control line and handle
- Choice of inlet fitting in either 4-claw or Spud type. Spud will be supplied unless otherwise noted in Order Comments field.
BMS1102TERAFREE Shipping 30 Day Money-Back Guarantee | Free Returns 90 Day Manufacturer Warranty- Unique! Dual Outlet for 2 operators, in a short configuration for easy loading.
- Only 46 inches tall! Shorter than a standard 6.5 pot.
- Capacity of 11 cu ft, which equates to 1600lbs of a dense media like premium GMA Garnet
- Pressure Rating: 150psi
- TeraValve pressure-hold metering valves
- Blast Pot
- Pneumatic Deadman Control System comes with 2 sets of 50 feet of control line and handle
- Choice of inlet fitting in either 4-claw or Spud type. Spud will be supplied unless otherwise noted in Order Comments field.
Part Number Purchase Price BMS1102TERA $18,970.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$18,970.00
-
-
FREE Shipping 30 Day Money-Back Guarantee | Free Returns 90 Day Manufacturer Warranty
- Versatile! No need to have separate wet and dry blast equipment. Wet blast or dry blast with a single unit
- Minimal water usage (less than 1 pint / ½ litre per minute) with proprietary Schmidt technology that allows precise control of the amount of water injected into the air stream while blasting
- Abrasive tank is “dry” so there is no need to drain water to refill with abrasive. This creates a significantly cleaner job site and is more efficient
- Schmidt TeraValve™ XL abrasive metering valve offers precise and repeatable control of a wide range of coarse or fine abrasives
- Wide range of blasting pressure capabilities from 10 to 150 psi
- Toggle between wet blast, dry blast, wash-down and blow-off using a single control panel
- This version has a 3.5 C.F. capacity. Other sizes are available upon request - enquire.
-
Updated and enhanced! BlastOne has refreshed its highly successful MistBlaster® and has released the latest generation with even more capability! What HAS NOT changed:
- Industry-Leading Flexibility.
- The MistBlaster® is a true dry blaster with the added capability of being the best wet blaster on the market. It is not a limited-purpose dustless / slurry blaster that will sit around gathering dust most days.
- Water and Abrasive flow is separately adjustable. Maximizes production while keeping cleanup to a minimum.
- Reliable design. Uses the latest generation TeraValve® metering valve on the popular 6.5CF pot chassis.
- Abrasive choice. Will work with most abrasives in dry mode. In wet mode, garnet or crushed glass are recommended.
- Enhanced functionality. 4 functions are built into the control panel (Dry Blast, Wet Blast, Wash Down, and now Blow Down)
- Controls flexibility. The dual deadman control system is now set up to operate either electrically or pneumatically.
- High-Flow piping. Air pressure regulator has been deleted and piping has been upgraded to increase nozzle pressure.
- Single outlet TeraValve® abrasive metering valve
- Dual electric / pneumatic controls, including deadman handle and control line
- Industrial-strength Schmidt® VBS II Muffler
- Wheel version - Stand-alone unit, portable configuration
- Skid version - Stand-alone unit, mounted on a steel skid.
- Combo Skid versions, save setup time and storage space. Available in the following configurations:
- Combo Skid 400 cfm Dryer Options as follows:
- Deliquescent type (4-season / highest efficiency)
- Aftercooler Squat type (3-season / less effective in cooler temperatures)
- No Dryer
- Note: Unlike dedicated slurry-type blasters, the MistBlaster is designed around a standard dry vessel. A stand-alone air dryer is required in order to realize a full return on your investment.
- Combo Skid Mounting Options as follows:
- Steel Skid
- Steel Skid with Frame
- Combo Skid Breathing Air Packages as follows:
- With Breathing Air Station (breathing air filter, carbon monoxide alarm, and 50' breathing air line)
- Without Breathing Air Station
- Note: All Combo Skid configurations include an Air Manifold with spare air ports and a 50-gallon tank.
- Combo Skid 400 cfm Dryer Options as follows:
- Retrofit version: Save money by retrofitting your existing 6.5 pot (must be structurally sound). Available in wheel or skid configurations and includes all standard MistBlaster features.
- Industry-Leading Flexibility.
-
FREE Shipping 30 Day Money-Back Guarantee | Free Returns 90 Day Manufacturer Warranty
- The most versatile, easy-to-regulate dry blast machine on the market
- 10-150psi blasting pressure range
- With a load skid combined with an inlet filter, this product uses a differential pressure gauge to allow accurate "metering" of hard-to-flow abrasives like Soda and fine Garnets
- With regulators for the blast and tank pressure for accurate control, this product can be used with most abrasive types - fine to coarse
- With the addition of a media vibrator to improve light media flow and an easy-to-use media shut-off valve this unit is perfect for graffiti removal and all other types of soda blasting
- G2 pneumatic deadman control, 55' twinline control hose, 55' water line with wet blast attachment for dust suppression included with purchase
-
VELOCITY
Technology insertion to exponentially increase shipyard blast and coat production. COMPONENTS & FEATURES The individual technologies include, but are not limited to:
- Intelliblast Blast Pot Controls:
- Smart controls that optimize blasting parameters for maximum efficiency and effectiveness.
- Snakebite Blasting Nozzles
- High-performance nozzles designed for precise and powerful material removal, reducing blasting time and lowering process noise.
- Rapidly Deployable Containments
- Innovative containment systems that can be quickly deployed, ensuring a controlled environment, and minimizing the spread of contaminants.
- Vortex Airflow Movement
- Proprietary airflow design that lowers energy consumption, enhances ventilation, and ensures the efficient removal of particles from the blasting and painting areas.
- Combination Dual Air Plenums
- Dual air plenums that provide a uniform and controlled airflow, optimizing the blasting and painting processes.
- Energy Recovery System (ERS)
- An energy recovery system that captures and recycles heat energy, reducing overall energy consumption and operational costs
BENEFITS
- Faster production cycles
- Reduced operational costs
- Enhanced environmental sustainability
- Improved worker safety
VELOCITYTechnology insertion to exponentially increase shipyard blast and coat production. COMPONENTS & FEATURES The individual technologies include, but are not limited to:
- Intelliblast Blast Pot Controls:
- Smart controls that optimize blasting parameters for maximum efficiency and effectiveness.
- Snakebite Blasting Nozzles
- High-performance nozzles designed for precise and powerful material removal, reducing blasting time and lowering process noise.
- Rapidly Deployable Containments
- Innovative containment systems that can be quickly deployed, ensuring a controlled environment, and minimizing the spread of contaminants.
- Vortex Airflow Movement
- Proprietary airflow design that lowers energy consumption, enhances ventilation, and ensures the efficient removal of particles from the blasting and painting areas.
- Combination Dual Air Plenums
- Dual air plenums that provide a uniform and controlled airflow, optimizing the blasting and painting processes.
- Energy Recovery System (ERS)
- An energy recovery system that captures and recycles heat energy, reducing overall energy consumption and operational costs
BENEFITS
- Faster production cycles
- Reduced operational costs
- Enhanced environmental sustainability
- Improved worker safety
Part Number Purchase Price VELOCITY $16,500,000.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$16,500,000.00
-
- Intelliblast Blast Pot Controls:
-
BMS200
- 20 cu ft Blast pot
- Excellent for a blastroom application with 2 blasters
- Dual outlet Thompson Valve II abrasive metering valves
- Abrasive capacity
- Garnet 2950 lbs
- Steel Grit 4900 lbs
- Comes with two pneumatic deadman handles and two lengths of control hose (Electric Available)
- Genuine Products - Manufactured by Schmidt to BlastOne specifications
BMS200- 20 cu ft Blast pot
- Excellent for a blastroom application with 2 blasters
- Dual outlet Thompson Valve II abrasive metering valves
- Abrasive capacity
- Garnet 2950 lbs
- Steel Grit 4900 lbs
- Comes with two pneumatic deadman handles and two lengths of control hose (Electric Available)
- Genuine Products - Manufactured by Schmidt to BlastOne specifications
Part Number Purchase Price BMS200 Request Quote Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.Request Quote
-
-
DM2152ACSThis kit includes all parts needed to change from blasting to blow-off at the flip of a switch at the deadman. Eliminates need for a separate air-hose or trekking back to the pot to shut off the abrasive. This version is for pots with an existing Thompson 2 valve and pneumatic controls.DM2152ACSThis kit includes all parts needed to change from blasting to blow-off at the flip of a switch at the deadman. Eliminates need for a separate air-hose or trekking back to the pot to shut off the abrasive. This version is for pots with an existing Thompson 2 valve and pneumatic controls.
Part Number Purchase Price DM2152ACS $804.43 Conversion kit to upgrade existing Thompson 2 pot to Remote Abrasive Cut-Off (ACO)
Part #DM2152ACS
View Product DetailsWeb price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$804.43
-
FREE Shipping
30 Day Money-Back Guarantee|Free Returns
90 Day Manufacturer Warranty
