My Account
Blast / Air Hose & Couplings
Blast Hoses
Blast Hose Couplings
Bull Hoses
Bull Hose Couplings
Chicago / Air Hoses
Chicago / Air Hose Couplings
Hose Gaskets, Lock Pins, Screws, etc
Hose Safety, Tools & Other
Showing 16–30 of 37 results
-
The Red Rubber Air Hose is a standard duty hose ideal for powering machinery, tools, and air motors, crafted from high-quality EPDM synthetic rubber with a 200psi rating. Available in sizes from 3/16" to 2", it's sold by the foot unfitted and can also be procured in full coils between 200 and 500 feet long, offering versatility and dependability for medium flow air supply needs.- Standard duty red rubber air hose
- High Quality EPDM Synthetic rubber cover and tube
- 200psi rated
- Ideal for Machinery, tools and air motors
- Not Rated for Breathing air
- Sold by the foot unfitted
- Available in unfitted full coils between 200 and 500 feet long, depending on ID. (Can be up to 3 separate pieces per full coil)
- I.D. Sizes available from 3/16" to 2"
- Prefitted Chicago hoses available here
-
Ensure safety with the Safety Whipcheck for Hose Connections. Designed for hoses from ½" to 3½", these steel-constructed whipchecks restrain hoses during unexpected disconnections.
- Use of a safety whipcheck restraint is mandatory on all hoses
- Whip checks are of steel construction
- HF SCA-1 small safety cable - 28" long
- For use on blast hoses (½" to 2 ½") OD
- HF SCA-2 large safety cable - 38" long
- For use on blast and bull air hoses (1-1/2" to 3½") OD
- Whip Checks restrains hoses in the event of a failure or accidental disconnection
-
Nozzle holder for blast hose
- Couples the blast nozzle to the blast hose
- Choose your blast nozzle thread type;
- 3/4" Medium (aka Mitey-Mite) Thread
- 1-1/4" Industrial Fine Thread
- 2" Coarse/Contractor Thread *Contractor Favorite*
- Available in Nylon, Brass or Aluminum
- Click the Documents tab below to view full selection
- Industry Commonly Referred to As: HE1, HE-1, HE2, HE-2, HE3, HE-3, NHP1, NHP2, NHP3, NH1, NH-1, NH2, NH-2, NH3, NH-3
-
OTK Crimp Hose Clamps (SKU: P-OTKCHC) offer a reliable solution to attach and seal hoses onto various fittings, such as barbs or nipples. Crafted for precision, these clamps ensure a tight fit, reducing the risk of leaks. Whether you're working with a Twinline control hose or an AHB-10 breathing air hose, we've got the right size for you:
- For Twinline control hose: Use size 1113
- For AHB-10 breathing air hose: Use size 1518
-
- 2-claw threaded coupling for metering valve outlet, to enable connection of blast hose
- Supplied with HFGMRLP coupling gasket fitted
- For Aluminum, Brass, and Steel, use HFCLP1 thin safety lock pins - purchase separately
- Nylon is supplied with HFGPCG gasket fitted and contains an integral springlock pin
- 2 types available - Standard and MegaMax.
- Note: MegaMax and Standard couplings require an adapter to fit together.
- MegaMax couplings are Full-Flow, designed to remove the air restrictions caused by standard couplings, and increases the PSI available to the nozzle. The increased PSI is mostly beneficial when doing high-production blasting using 1.5" or 2" ID Blast Hoses.
- These are threaded couplings (threaded fittings) designed for metering valve outlets only. Unthreaded QC couplings are used on blast hoses, and can be found HERE.
- Note: 1 1/4" threaded couplings can also be used as Quick-couple type nozzle holders for fine thread nozzles.
- Industry Size Commonly Referred to as SB1, SB-1, SB2, SB-2
-
The 4-Claw Fittings (aka Crowsfoot Couplings) provides a reliable and quick connection for MegaFlow Bull / Air Hoses in industrial applications. Built from plated steel, this coupling is rated for 150 psi and is designed for use with claw bolt clamps and HFCLP2 lock pins for enhanced safety. Each fitting is supplied with a rubber gasket. Quantity discounts available.
Key Product Features:
- 4-Claw (Crowsfoot) coupling for quick connections between bull hoses and equipment.
- Rated for 150 psi; not intended for steam use.
- Compatible with 1-1/4" through 2" ID bull hoses.
- Requires HFCLP2 lock pins and whipchecks to ensure secure connections.
- Durable steel construction for high-pressure industrial use.
- Replacement 4-claw gaskets and quantity discounts available.
-
- Heavy Duty Spud fitting assembly for MegaFlow Bull Air Hose
- Includes Hose Tail (aka Boss® Ground Joint Stem) and Boss® Wing Nut. A hammer is used on the wing nut to tighten it.
- Rugged plated steel construction
- Recommended by BlastOne as the preferred Bull hose fitting – safer than 4-claw
- Gasket-less, low maintenance design. No lock-pins required.
- Safety requires bull hose bolt clamps to secure to the air hose by a special installation procedure
- Sold Individually with quantity discounts available
- Genuine Parts – manufactured by Dixon
-
- Heavy Duty Spud Fittings for MegaFlow Bull / Air Hose to connect bull hose to equipment, or to connect two bull hoses
- Also known as Boss® Ground Joint Fittings, this selection is made of heavy plated Iron
- Recommended by BlastOne as the preferred Bull hose fitting as they are inherently safer than 4-claw fittings
- Sold Individually with Mix/Match quantity discounts available
- Genuine Parts - Manufactured by Dixon
-
- 30 Day Money Back Guarantee | Free Returns
- Industry standard coupling for use with air supply hose
- Rugged steel construction
- Quarter-turn quick action connector
- Supplied with 3/4" I.D. bore gaskets fitted
- Use HF CLP-1 or HF CLP-2 Lock Pin - (not included)
- Available with hose tail, male threads, or female threads
- Sold individually
-
- Must be installed in all blast hose couplings for safety
- Stops the blast hose coupling rotating and disconnecting
- HF-CLP1 is the thin type lock pin (Pack of 25)
- HF-CLP2 is the thick type lock pin (Pack of 25)
- HF-CLP3 is the nylon coupling spring type lock pin (Pack of 10)
- HF-CLP4 is the multi-fit spring type lock pin (Pack of 25)
-
- Hi-flow Blast Pot Pusherline Kit
- Used on Blast Pots between the air control valves and the metering valve
- Sold as a complete assembly Including
- Pusherline Air Hose
- 1-¼" ball valve
- 1-¼" Nut and tails with bolt style clamps for in-field installation
- Does not include Metering Valve
-
FMAKGSKP
- 30 Day Money Back Guarantee | Free Returns
- Replacement gaskets for 'Chicago' type Air King coupling
- Use to replace coupling gaskets when worn
- Sold in a pack of 10
FMAKGSKP- 30 Day Money Back Guarantee | Free Returns
- Replacement gaskets for 'Chicago' type Air King coupling
- Use to replace coupling gaskets when worn
- Sold in a pack of 10
-
HFGMRHP
- Suits Standard Aluminum and Brass Blast Hose Couplings
- High Pressure Version which lasts longer and withstands higher pressures
- Recommended when blasting with pressures over 120psi
- Single Lipped High Pressure Urethane
- 1-¼ (32mm) Bore Size
- Sold as a pack of 10
HFGMRHP- Suits Standard Aluminum and Brass Blast Hose Couplings
- High Pressure Version which lasts longer and withstands higher pressures
- Recommended when blasting with pressures over 120psi
- Single Lipped High Pressure Urethane
- 1-¼ (32mm) Bore Size
- Sold as a pack of 10
-
HFGMRXP
- Suits Mega-Max Aluminum and Brass Blast Hose Couplings
- Single Lipped MRL Rubber
- 1-¾ (45mm) Bore Size
- Have Large Bore for maximum efficiency
- Sold as a pack of 10
HFGMRXP- Suits Mega-Max Aluminum and Brass Blast Hose Couplings
- Single Lipped MRL Rubber
- 1-¾ (45mm) Bore Size
- Have Large Bore for maximum efficiency
- Sold as a pack of 10
-
HFGMRLPThe "Standard Claw and Bore Metal Coupling Gaskets MRL" (SKU: HFGMRLP) is a durable replacement gasket, designed for standard metallic claw couplings. Sold in packs of 10, suitable for systems blasting over 80psi.
- 30 Day Money Back Guarantee | Free Returns
- Suits Standard Aluminum and Brass Blast Hose Couplings
- Single Lipped MRL Rubber
- 1-¼ (32mm) Bore Size
- Work great with blasting systems that blast at pressure over 80psi
- Sold as a pack of 10
HFGMRLPThe "Standard Claw and Bore Metal Coupling Gaskets MRL" (SKU: HFGMRLP) is a durable replacement gasket, designed for standard metallic claw couplings. Sold in packs of 10, suitable for systems blasting over 80psi.- 30 Day Money Back Guarantee | Free Returns
- Suits Standard Aluminum and Brass Blast Hose Couplings
- Single Lipped MRL Rubber
- 1-¼ (32mm) Bore Size
- Work great with blasting systems that blast at pressure over 80psi
- Sold as a pack of 10
Choosing the right coupling is critical for maintaining the safety and efficiency of your blasting system. Our Blast & Air Hose Couplings are built to withstand extreme conditions, ensuring secure connections that prevent air or media leaks during operation. We offer couplings made from durable materials such as brass, aluminum, and hardened steel, designed to handle high-pressure environments and abrasive media. In addition to couplings, we also provide gaskets, safety clips, and other accessories to ensure a complete and secure connection. For optimal performance, pair your couplings with our high-quality blast hoses and nozzles. Need assistance? Our team is here to help you find the right coupling for your system.