Blast Hose Couplings
Showing all 7 results
-
- Fitted Blast Hose
- Premium blast hose fitted with couplings only
- We have many ways to fit a blast hose
- For a Extension hose we recommend you use 4 ply type
- Fitted and Quality Controlled by BlastOne Trained Staff
-
- 2-claw Blast Hose QC Quick couplings
- Available in Brass, Aluminum, Steel and Nylon
- 2 types available - Standard and MegaMax.
- NOTE: MegaMax and Standard couplings require an adapter to fit together
- MegaMax couplings are Full-Flow, designed to remove the air restrictions caused by standard couplings and increases the PSI available to the nozzle. The increased PSI is mostly beneficial when doing high-production blasting using 1.5" or 2" ID Blast Hoses.
- These are unthreaded couplings designed for blast hoses only. Threaded QC fittings are used on the metering valve outlet, and can be found HERE.
- Industry Size Commonly Referred to as Q1, Q-1, Q2, Q-2, Q3, Q-3, Q4, Q-4, Q6, Q-6
-
Nozzle holder for blast hose
- Couples the blast nozzle to the blast hose
- Choose your blast nozzle thread type;
- 3/4" Medium (aka Mitey-Mite) Thread
- 1-1/4" Industrial Fine Thread
- 2" Coarse/Contractor Thread *Contractor Favorite*
- Available in Nylon, Brass or Aluminum
- Click the Documents tab below to view full selection
- Industry Commonly Referred to As: HE1, HE-1, HE2, HE-2, HE3, HE-3, NHP1, NHP2, NHP3, NH1, NH-1, NH2, NH-2, NH3, NH-3
-
- 2-claw threaded coupling for metering valve outlet, to enable connection of blast hose
- Supplied with HFGMRLP coupling gasket fitted
- For Aluminum, Brass, and Steel, use HFCLP1 thin safety lock pins - purchase separately
- Nylon is supplied with HFGPCG gasket fitted and contains an integral springlock pin
- 2 types available - Standard and MegaMax.
- Note: MegaMax and Standard couplings require an adapter to fit together.
- MegaMax couplings are Full-Flow, designed to remove the air restrictions caused by standard couplings, and increases the PSI available to the nozzle. The increased PSI is mostly beneficial when doing high-production blasting using 1.5" or 2" ID Blast Hoses.
- These are threaded couplings designed for metering valve outlets only. Unthreaded QC couplings are used on blast hoses, and can be found HERE.
- Note: 1 1/4" threaded couplings can also be used as Quick-couple type nozzle holders for fine thread nozzles.
- Industry Size Commonly Referred to as SB1, SB-1, SB2, SB-2
-
BHMXQADAPTERAdapts MegaMax coupled hoses to standard QC coupled hose.BHMXQADAPTERAdapts MegaMax coupled hoses to standard QC coupled hose.
-
- For use with Nylon Coupling Series: PCG-1; PCG-2; PCG-3;
- Material: Double-lipped rubber
- Compatibility:
- PCG-1: 3/4″ ID and Smaller Blast Hose
- PCG-2: 1″ ID Blast Hose
- PCG-3: 1-1/4″ ID and Larger Blast Hose
- Sold as a pack of 10
-
- Suits 1-1/2" - 3" BlastOne MegaFlow Bull Hose and Spud or 4-Claw fittings
- Holds coupling in the hose by clamping externally
- Genuine part manufactured by Dixon
- Sold individually