Light / Medium Duty Parts
Showing 1–15 of 215 results
-
The Axxiom ShortStop prevents accidental activation of electric deadman systems caused by short-circuits in the control cable. This safety-enhancing option is especially beneficial when blasting at heights, or in applications where the control cable is susceptible to high wear. The ShortStop PnP (Plug-n-play) is simple to install and includes the control module and junction box needed to convert existing electric control systems*. Both single-outlet and 4-outlet bulk pot conversions are available. *Note: Deadman handles are unique to the ShortStop PnP. Conversion kits do not include handles, which are available separately on this page.
-
From gaskets and crabs to covers and bolts, BlastOne has all the replacement parts you need to repair the Handhole / Manway access panels for Axxiom / Schmidt blast pots.
- Special note: Be sure to try out the SureFit™ Handway gasket for the 6.5 pot. It makes installation much easier & faster. Lasts longer too!
- Note: Versions of these access assemblies have changed over the years. If any doubt which version you need, send us the model year and serial number of your blast pot to confirm the correct part before ordering.
-
GR120700Pipe fitters and maintenance workers routinely use these fittings in many applications. Details as follows:
- 1-¼" - 11 ½ NPTF thread size
- Carbon Steel, Hex Nipple Design - makes installation easier
- 3000 PSI Operating Pressure with 4:1 Safety factor
GR120700Pipe fitters and maintenance workers routinely use these fittings in many applications. Details as follows:- 1-¼" - 11 ½ NPTF thread size
- Carbon Steel, Hex Nipple Design - makes installation easier
- 3000 PSI Operating Pressure with 4:1 Safety factor
-
IPC3001The deflection tip in the ConeBlast Jr. internal pipe blaster is responsible for ensuring an even blast pattern. The abrasive stream hits the tip and fans out in a 360° pattern. It is subject to high wear and is a common replacement part. Additional details:
- Application: This tip works only in the ConeBlast Jr., not the larger ConeBlast version.
- Construction: This tip is made from tungsten carbide. For large pipe-cleaning projects, contact us for options on longer-life versions.
IPC3001The deflection tip in the ConeBlast Jr. internal pipe blaster is responsible for ensuring an even blast pattern. The abrasive stream hits the tip and fans out in a 360° pattern. It is subject to high wear and is a common replacement part. Additional details:- Application: This tip works only in the ConeBlast Jr., not the larger ConeBlast version.
- Construction: This tip is made from tungsten carbide. For large pipe-cleaning projects, contact us for options on longer-life versions.
-
DM2152ACSThis kit includes all parts needed to change from blasting to blow-off at the flip of a switch at the deadman. Eliminates need for a separate air-hose or trekking back to the pot to shut off the abrasive. This version is for pots with an existing Thompson 2 valve and pneumatic controls.DM2152ACSThis kit includes all parts needed to change from blasting to blow-off at the flip of a switch at the deadman. Eliminates need for a separate air-hose or trekking back to the pot to shut off the abrasive. This version is for pots with an existing Thompson 2 valve and pneumatic controls.
-
BlastOne has the parts needed to service and maintain all Axxiom / Schmidt blast pots. The following are the common Pop Up components - contact us if you do not see the version you need. Pop-up Valve and Shaft (aka Pop-up Head)
- Hemispherical pop-up valve seals off pot when pressurized
- Shaft is embedded in the urethane head
- Suits Schmidt's contractor series blast pots
- Available in the following:
- MPN 2100-000, Small, for 1.5 CF pots
- MPN 2100-010, Standard, for 3.5, 6.5, 10, & 20CF pots
- MPN 2100-010-04, Alternate for Standard sizes, designed for high flow
- Available in the following:
- MPN 2100-001, Small, for 1.5 CF pots
- MPN 2100-011, Standard, for 3.5, 6.5, 10 & 20 CF pots
- MPN 2100-011-04, “Sure-Seal” Alternate for standard sizes, good when applications include blasting at low pressures. Use with 2100-010-04 pop-up head.
-
GR157705Experience unmatched durability and efficiency with the 1/4" NPTM x 3/8" NPSF High Pressure Union Adaptor, SKU: GR157705. A must-have for industrial applications!
- Robust Construction: Engineered for high-pressure environments.
- Versatile Compatibility: Fits 1/4" NPTM and 3/8" NPSF connections seamlessly.
- Leak-Proof Design: Ensures a secure, tight seal every time.
- Easy Installation: Quick and hassle-free setup.
- Corrosion Resistant: Withstands harsh industrial conditions.
GR157705Experience unmatched durability and efficiency with the 1/4" NPTM x 3/8" NPSF High Pressure Union Adaptor, SKU: GR157705. A must-have for industrial applications!- Robust Construction: Engineered for high-pressure environments.
- Versatile Compatibility: Fits 1/4" NPTM and 3/8" NPSF connections seamlessly.
- Leak-Proof Design: Ensures a secure, tight seal every time.
- Easy Installation: Quick and hassle-free setup.
- Corrosion Resistant: Withstands harsh industrial conditions.
-
- Female Pipe Coupling
- FP x FP
- Solid Machined Brass
- Performs to SAE J530 and J531 Standards
- Working Pressure: 1,000 PSI
- Temperature Range: -65°F to +250°F