My Account
Blast Equipment Parts
Abrasive Metering Valves & Parts
Air Control Valves & Related
Deadman / Control Systems
General Repair Parts for Blast Pots
Internal Pipe (ID) System Components
MistBlaster Specific Parts
Sponge Blast Equipment Parts
Vacuum Blaster Workheads, Parts & Related
VertiDrive Specific Parts
Showing 121–135 of 352 results
-
BA02007BlastOne has the parts to maintain your Clemco® blast equipment. This is a replacement 2-¼" O-ring for the RMC valve (factory part number 02007) and it is also included in the applicable service kit available here.BA02007BlastOne has the parts to maintain your Clemco® blast equipment. This is a replacement 2-¼" O-ring for the RMC valve (factory part number 02007) and it is also included in the applicable service kit available here. -
BA01992BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement 3/16" O-Ring for the 1" inlet valve (factory part number 01992).BA01992BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement 3/16" O-Ring for the 1" inlet valve (factory part number 01992).
-
BA01969
BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement plug washer for the 1" Piston Outlet valve, as well as the 1" Inlet Valve (factory part number 01969).
BA01969BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement plug washer for the 1" Piston Outlet valve, as well as the 1" Inlet Valve (factory part number 01969).
-
DM227000008PKWhen your G3 Trigger Deadman system needs refreshed, we have the replacement parts you need. This is the guard pin to secure the trigger guard (including the retaining rings).
- High-quality stainless steel construction
- Designed for use with the Schmidt G3 Deadman Control Handle
- Easy to install and use
- Sold in packs of 4 pins
DM227000008PKWhen your G3 Trigger Deadman system needs refreshed, we have the replacement parts you need. This is the guard pin to secure the trigger guard (including the retaining rings).- High-quality stainless steel construction
- Designed for use with the Schmidt G3 Deadman Control Handle
- Easy to install and use
- Sold in packs of 4 pins
Part Number Purchase Price DM227000008PK $27.81 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$27.81
-
-
KA018
- Toggle Actuator for Pneumatic Remote Abrasive Cut-Off
- 1/8"
KA018- Toggle Actuator for Pneumatic Remote Abrasive Cut-Off
- 1/8"
-
BA01998
BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement plug washer for the 1-½" Inlet Valve (factory number 01998).
BA01998BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement plug washer for the 1-½" Inlet Valve (factory number 01998).
-
- European-style remote controls
- 1-1/4" (32mm) thread inlet valve
- 3/4" (19mm) thread ported exhaust valve
- Available as an integrated inlet/exhaust assembly
- Supplied standard as separate valves for simplified installation and ease of maintenance
- Service repair kit includes seals, gaskets, etc. to service both the inlet and exhaust valve
- Optional service kit #2 also includes exhaust deflector plate and gasket
- Recommended replacement is the Combo Valve System- DM2223RK00
-
Part Number Purchase Price DM222300001 $106.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$106.00
-
-
DMPYT400
- Piston-operated valve
- 1/4" female NPT supply air connection
- Effortless activation via deadman control handle
- Guide tubes ensure consistent plunger travel
- Eliminate repressurization down time profit loss
DMPYT400- Piston-operated valve
- 1/4" female NPT supply air connection
- Effortless activation via deadman control handle
- Guide tubes ensure consistent plunger travel
- Eliminate repressurization down time profit loss
-
DMRGNE2099RGNE Electric Switch with a 300mm CordDMRGNE2099RGNE Electric Switch with a 300mm Cord
Part Number Purchase Price DMRGNE2099 $75.19 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$75.19
-
-
Combining with the deadman, these control valves (aka pilot valves or deadman valves) are available in either pneumatic or electric.
- Uses an electric or pneumatic charge to push over the shuttle which opens ports to control the deadman system
- Provides sharp, clean and rapid response
- Improves safety
- Installs between twinline and inlet valve
- Reduces wear on both the remote control exhaust valve and the abrasive metering valve
- Uses an electric or pneumatic charge to push over the shuttle which opens ports to control the deadman system
-
BA02006BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement bottom cap seal for the remote control inlet valve (factory part number 02006).BA02006BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement bottom cap seal for the remote control inlet valve (factory part number 02006).
-
DMRMCVEBK
BlastOne has the parts to maintain your Clemco® blast equipment. This is the rebuild kit for the piston outlet valve (factory part number 01928). Includes the following:
- BA01969 Plug Washers (2)
- BA01972 Valve Plug
- BA01974 Compression Spring
- BA01986 Plug Washer Retainer
NOTE: BlastOne also has retrofit kits with upgraded valves, and which are designed to reduce maintenance while keeping your current pot. For pressure hold retrofit kits, see here. For pressure-release retrofit kits, see here.
DMRMCVEBKBlastOne has the parts to maintain your Clemco® blast equipment. This is the rebuild kit for the piston outlet valve (factory part number 01928). Includes the following:
- BA01969 Plug Washers (2)
- BA01972 Valve Plug
- BA01974 Compression Spring
- BA01986 Plug Washer Retainer
NOTE: BlastOne also has retrofit kits with upgraded valves, and which are designed to reduce maintenance while keeping your current pot. For pressure hold retrofit kits, see here. For pressure-release retrofit kits, see here.
-
DMRMCVIBK
BlastOne has the parts to maintain your Clemco® blast equipment. This is the rebuild kit for the 1-½" inlet valve (replaces factory part number 01927). Includes the following:
- BA01982 Compression Spring, small
- BA01998 Plug Washers (2)
- BA02000 Compression Spring, large
- BA02002 Plug Washer Retainer
- BA02006 Bottom Cap Seal
- BA02007 O-Ring, large
- BA02008 O-Ring, small
If you need the rebuild kit for the 1" inlet valve version, click here.
NOTE: BlastOne also has retrofit kits with upgraded valves, and which are designed to reduce maintenance while keeping your current pot. For pressure hold retrofit kits, see here. For pressure-release kits, see here.
DMRMCVIBKBlastOne has the parts to maintain your Clemco® blast equipment. This is the rebuild kit for the 1-½" inlet valve (replaces factory part number 01927). Includes the following:
- BA01982 Compression Spring, small
- BA01998 Plug Washers (2)
- BA02000 Compression Spring, large
- BA02002 Plug Washer Retainer
- BA02006 Bottom Cap Seal
- BA02007 O-Ring, large
- BA02008 O-Ring, small
If you need the rebuild kit for the 1" inlet valve version, click here.
NOTE: BlastOne also has retrofit kits with upgraded valves, and which are designed to reduce maintenance while keeping your current pot. For pressure hold retrofit kits, see here. For pressure-release kits, see here.
-
Part Number Purchase Price DMWTXEDIODE $12.73 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$12.73
-
Explore our extensive range of blast equipment parts designed to enhance and maintain your blasting operations. From deadman control systems to high-pressure fittings, we provide everything you need to keep your equipment running smoothly and efficiently. Our selection includes durable components like hex pipe nipples, pop-up valves, and hose fittings, ensuring compatibility and high performance. Trust in our products to deliver reliability and safety across all your blasting projects.
