Blast Equipment Parts
Showing 91–105 of 153 results
-
AVAILABLE FOR RENTAL OR PURCHASE
- Abrasion-resistant, flex-coated control cable
- 12 Volt rated for electric deadman controls
- 3-Pin Twistlock connectors used for all deadman cables
- 2-wire is used for Battery connections only
- Optional heavy duty cable for use with steel grit or other high wear areas
- Please Request Rental Pricing
-
DMWTX1102
- Replacement ball and chain for Western Tech™ remote control handle
- Operator must use as per instruction manual
- Sold Individually
DMWTX1102- Replacement ball and chain for Western Tech™ remote control handle
- Operator must use as per instruction manual
- Sold Individually
-
AHRMS4055AVAILABLE FOR RENTAL OR PURCHASE The "Twin line Deadman Control Hose" (SKU: AHRMS4055) offers a safe, heavy-duty solution for pneumatic deadman controls. Bonded and color-coded for enhanced safety, it is available for rental or purchase.
- Bonded, heavy duty, twin rubber hose, color coded for safety
- Used to supply air to the deadman handle which is used to signal a "blast" return charge of air to the blast pot control valves
- Always replace the hose at the first sign of wear, this is a safety deadman control item.
- Fitted standard with male-female threaded connectors
- 1/4" (6 mm) connectors on 'supply' red hose
- 1/8" (3 mm) connectors on 'return' green hose
- 55 ft length
- Please Request Rental Pricing
AHRMS4055AVAILABLE FOR RENTAL OR PURCHASE The "Twin line Deadman Control Hose" (SKU: AHRMS4055) offers a safe, heavy-duty solution for pneumatic deadman controls. Bonded and color-coded for enhanced safety, it is available for rental or purchase.- Bonded, heavy duty, twin rubber hose, color coded for safety
- Used to supply air to the deadman handle which is used to signal a "blast" return charge of air to the blast pot control valves
- Always replace the hose at the first sign of wear, this is a safety deadman control item.
- Fitted standard with male-female threaded connectors
- 1/4" (6 mm) connectors on 'supply' red hose
- 1/8" (3 mm) connectors on 'return' green hose
- 55 ft length
- Please Request Rental Pricing
-
BA01990BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement 1-¾" O-ring for the 1" inlet valve (factory part number 01990).BA01990BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement 1-¾" O-ring for the 1" inlet valve (factory part number 01990).
-
DMECK2999
- 24 ft cable with alligator clips
- Connects directly to a battery to supply 12 volt power for deadman controls
- Deadman cable is fitted with a 2-Pin TwistLok plug connector for connecting to Deadman controls on the blast pot
DMECK2999- 24 ft cable with alligator clips
- Connects directly to a battery to supply 12 volt power for deadman controls
- Deadman cable is fitted with a 2-Pin TwistLok plug connector for connecting to Deadman controls on the blast pot
-
The Axxiom TeraValve - the next generation abrasive metering valve for blast machines with pressure-hold technology. Featuring:
- Extended Life. Schmidt XL technology utilizes tough metal alloys and internal wipers, reducing premature wear due to dust migration.
- Easy Interchangeability. Customers with older Thompson valves that need rebuilt have an easy alternative. Exchange the old valve with a new TeraValve with no modifications required!
- Efficient. Pressure-hold design maintains pressure in the pot, even with deadman released. This can save up to 15% of abrasive when your projects involve a lot of start-stop blasting. Reduces expensive compressed air consumption too!
- Economical. The compact design of the TeraValve actually costs less than the previous-gen Thompson II valve.
- Available for more applications. Pressure-release pots with limited clearance (where traditional Thompson Valves do not fit) can also benefit. Efficient pressure-hold technology can be used on any blast pot with a minimum of 6" clearance by installing a TeraValve retrofit kit.
- Genuine Parts - Manufactured by Schmidt® / Axxiom Manufacturing
-
When Axxiom released the Thompson 2 valve, the benefits of Pressure-Hold technology were instantly upgraded by improved user experience over the Thompson I valve. Details as follows:
- Improved servicability:
- Body and cylinder are now 2 parts, providing easier removal of sleeve and plunger.
- Additional Seal protection:
- Has 3 separate seals (versus the original 1), reducing dust migration and improving durability.
- Multiple Sleeve choices:
- In addition to the original Tungsten Carbide and Urethane full-flow options, Axxiom has released additional options that help prevent over-consumption in various applications.
- Virtual Position Indicator:
- Simplifies setting of the media flow rate.
- Cleanout:
- Full 1" port directly under the inlet allows cleanout without removing the valve.
- Size info:
- Standard 1-¼” (32 mm) inlet thread
- 4 choices of MNPT piping for pusher-line connection
- 1", 1-¼", 1-½", and 2"
- Options: Make servicing the valve even more convenient with one of the following:
- Union-End Ball Valve - The UEBV allows removal of valve without emptying the pot.
- Tri-Clover Quick Connect - allows removal of valve without tools.
- Combination UEBV and Tri-Clover - combines the benefits of both options at a reduced cost.
- Improved servicability:
-
- Pressure-release deadman control valve i.e., blast machine depressurizes when the deadman handle is released.
- Used when an overhead hopper automatically feeds abrasive into a blast machine.
- Rugged stainless steel body, compact, isolated 2-bolt construction.
- Doubles blast machine refill cycle time.
- Virtual Position Indicator illustrates orifice size, giving the ability to set abrasive flow quickly and consistently.
- Set and forget – flow rates stay set where you put them.
- High wear, rugged plunger seal.
- Stainless steel body for long life.
- Improved urethane clean-out port enabling quick removal of obstructions while improving port and valve life.
- Fit a rebuild kit while the valve is still fitted to the blast machine.
- Sold individually.
- Genuine Products – Manufactured by Schmidt / Axxiom Manufacturing
-
Schmidt changed the abrasive blasting industry when they introduced the MicroValve™. Now known as the MicroValve I (or the Original Microvalve), it is still available although most pressure-release Schmidt pots now use the newer MicroValve III®. It features:
- Simple threaded screw-type metering
- Hardened steel threaded base nipple
- (The brass threaded coupling shown is available separately.)
- Genuine Products - Manufactured by Schmidt® / Axxiom Manufacturing
-
- Thompson Metering Valve II lasts up to 10 times longer than any other valve, due to its unique engineering
- Designed to handle the harshest blasting environments known
- Will handle up to a 3/4" blast nozzle
- Will work with any abrasive, including very fine/dusty abrasives
- Most rugged and reliable valve for any application
- Sold Individually
- Genuine Parts - Made in USA by Schmidt / Axxiom Manufacturing
-
The Thompson I Valve was invented by Bob Schmidt and was instrumental in causing the popularity of pressure hold technology.
- Pressure-hold systems retain the pressure in the blast pot until the deadman handle is depressed. This reduces abrasive and energy waste.
- The Thompson I offers fine control for abrasive metering
- It comes in 3 nipple size configurations:
- 1 ¼” (32 mm) x 1 ¼” (32 mm)
- 1 ½" (38 mm) x 1 ½" (38 mm)
- 2" (50 mm) x 2" (50 mm)
- Threaded-plunger metering design with air actuated operation
- Fits most sand blast hoppers, blast pots or abrasive blasting machines
- Genuine Parts - Manufactured by Schmidt® / Axxiom Manufacturing
-
The Flat Sand Valve is legacy metering technology, where the metering is performed by sliding a lever to open and close the abrasive port. It is simple in design and relatively inexpensive, but has a few limitations. Details as follows:
- Slide-plate metering design, controlled by lever
- 1 1/4" (32 mm) ports
- Features side cleanout-inspection port
- Available with or without outlet nipple and Y-piece (Optional rubber lined nipple is available to extend nipple life.)
- The major limitations are:
- Not recommended for use with metallic abrasives
- The slide plate/lever design does not provide effective fine metering control. Typically this results in over consumption of media. For low-volume blasting using inexpensive media, this may not be an issue.
-
GVDNV100
- HFSTC3 blast coupling included
- Designed for use with coarse metallic abrasives
- Heavy cast iron construction
- Not recommended for use with fine abrasives
- 1 1/2" NPT female thread air connection
- Recommended upgrade: MicroValve 3
GVDNV100- HFSTC3 blast coupling included
- Designed for use with coarse metallic abrasives
- Heavy cast iron construction
- Not recommended for use with fine abrasives
- 1 1/2" NPT female thread air connection
- Recommended upgrade: MicroValve 3