Blast Equipment Parts
Showing 226–240 of 358 results
-
- Multi-purpose inline ball valve
- Plated brass corrosion-resistant body
- Full bore design for maximum airflow
- Rated for use up to 600 psi
- Female NPT threaded ports
- Sold individually
-
GV01247Clemco Manual Sand Valves are similar in concept to the larger Flat Sand Valve. The MSV abrasive metering valve is used exclusively on machines with ½" piping, such as the 0.5 and 1.0 CF Clemco blast machines. It is best used for expendable mineral and slag abrasives, and is not compatible with fine mesh or glass abrasive. MPN: 01247GV01247Clemco Manual Sand Valves are similar in concept to the larger Flat Sand Valve. The MSV abrasive metering valve is used exclusively on machines with ½" piping, such as the 0.5 and 1.0 CF Clemco blast machines. It is best used for expendable mineral and slag abrasives, and is not compatible with fine mesh or glass abrasive. MPN: 01247
-
GV01260
The Clemco Manual Sand Valve (MSV) must be maintained to provide acceptable metering capability. When it needs rebuilt, these OEM Clemco gaskets are readily available at BlastOne.
MPN: 01260
GV01260The Clemco Manual Sand Valve (MSV) must be maintained to provide acceptable metering capability. When it needs rebuilt, these OEM Clemco gaskets are readily available at BlastOne.
MPN: 01260
-
GV02433
Clemco Flat Sand Valves (FSV) and Sentinel metering valves must be maintained to provide acceptable metering capability. When these valves need rebuilt, OEM replacement gauge unit indicators are readily available at BlastOne.
MPN: 02433
GV02433Clemco Flat Sand Valves (FSV) and Sentinel metering valves must be maintained to provide acceptable metering capability. When these valves need rebuilt, OEM replacement gauge unit indicators are readily available at BlastOne.
MPN: 02433
-
GV02424
The Clemco Flat Sand Valve (FSV) , and the similar LPV (Low profile version) must be maintained to provide acceptable metering capability. When it needs rebuilt, these OEM Clemco gaskets are readily available at BlastOne. Two are required.
MPN: 02424
GV02424The Clemco Flat Sand Valve (FSV) , and the similar LPV (Low profile version) must be maintained to provide acceptable metering capability. When it needs rebuilt, these OEM Clemco gaskets are readily available at BlastOne. Two are required.
MPN: 02424
-
GV03080
Clemco Flat Sand Valves and Sentinel metering valves must be maintained to provide acceptable metering capability. When these valves need rebuilt, OEM replacement screws for use on the gauge units are available at BlastOne.
MPN: 03080
GV03080Clemco Flat Sand Valves and Sentinel metering valves must be maintained to provide acceptable metering capability. When these valves need rebuilt, OEM replacement screws for use on the gauge units are available at BlastOne.
MPN: 03080
-
GV215230715
- Replacement direct down base for the 2152-009 Schmidt Jumbo Thompson II Abrasive Metering Valve
- MPN 2152-307-15
GV215230715- Replacement direct down base for the 2152-009 Schmidt Jumbo Thompson II Abrasive Metering Valve
- MPN 2152-307-15
-
GV02431
The Clemco Flat Sand Valve (FSV) and the Sentinel valve must be maintained to provide acceptable metering capability. When it needs rebuilt, these OEM Clemco replacement handle bolt spacers are readily available at BlastOne.
MPN: 02424
GV02431The Clemco Flat Sand Valve (FSV) and the Sentinel valve must be maintained to provide acceptable metering capability. When it needs rebuilt, these OEM Clemco replacement handle bolt spacers are readily available at BlastOne.
MPN: 02424
-
GV2410320SPBV
- Tri-Clover Connector with Built in Ball-Valve
- Locate between the metering valve and the bottom of the pot to reduce maintenance time on the metering valve.
- Combines 2 time savers:
- Tri-Clover connection allows for easy removal of metering valve.
- Ball valve allows for removal of metering valve without emptying the pot.
- 1 1/4" x 1 1/4" NPT Threads - suits most blast pots and abrasive metering valves
- Use thread sealant tape or compound to ensure an airtight connection
- NOTE - this option adds 6 inches in height. Ensure that your pot has the required clearance before ordering, or that you can add the needed height to your existing pot.
GV2410320SPBV- Tri-Clover Connector with Built in Ball-Valve
- Locate between the metering valve and the bottom of the pot to reduce maintenance time on the metering valve.
- Combines 2 time savers:
- Tri-Clover connection allows for easy removal of metering valve.
- Ball valve allows for removal of metering valve without emptying the pot.
- 1 1/4" x 1 1/4" NPT Threads - suits most blast pots and abrasive metering valves
- Use thread sealant tape or compound to ensure an airtight connection
- NOTE - this option adds 6 inches in height. Ensure that your pot has the required clearance before ordering, or that you can add the needed height to your existing pot.
-
GV2410320SP
- Suits most blast pots and valves (any with 1-1/4" NPT thread)
- Locate between the metering valve and the bottom of the pot to reduce maintenance on the metering valve
- Allows easy removal of metering valve from pot
- Can be used independently, or in conjunction with a Union End Ball Valve. To order this combination as a unit, use part number GV2410320SPBV (saves cost).
- Alternate version to Tri-clover assembly without spring-loaded hinge
GV2410320SP- Suits most blast pots and valves (any with 1-1/4" NPT thread)
- Locate between the metering valve and the bottom of the pot to reduce maintenance on the metering valve
- Allows easy removal of metering valve from pot
- Can be used independently, or in conjunction with a Union End Ball Valve. To order this combination as a unit, use part number GV2410320SPBV (saves cost).
- Alternate version to Tri-clover assembly without spring-loaded hinge
-
BlastOne stocks the Axxiom replacement parts you need to keep your valves operating. These are the bottom base pipe nipples for the Thompson II metering valve:
- 1" x 1", MPN 2152-000-19
- 1-¼" x 1-¼", MPN 2152-000-15
- 1-½" x 1-½", MPN2152-000-11
-
GRD32977MB
- Suits 50 gallon and 275 gallon water tanks
- Air Operated, Double Diaphragm, Pneumatic Pump - used to Pump water from a water tank to a MistBlaster
- Allows you to have a mixing tank for HoldTite mixture with water when Mist or Vapor Blasting
- Max Working Pressure 100psi
- Free Flow delivery of 7.0 gallons per minute
- Maximum suction height is 12ft
- Air consumption is only 6scfm
- Pump comes complete with water fittings and air fittings
- Genuine Parts - Manufactured by Graco
GRD32977MB- Suits 50 gallon and 275 gallon water tanks
- Air Operated, Double Diaphragm, Pneumatic Pump - used to Pump water from a water tank to a MistBlaster
- Allows you to have a mixing tank for HoldTite mixture with water when Mist or Vapor Blasting
- Max Working Pressure 100psi
- Free Flow delivery of 7.0 gallons per minute
- Maximum suction height is 12ft
- Air consumption is only 6scfm
- Pump comes complete with water fittings and air fittings
- Genuine Parts - Manufactured by Graco
-
BA2497706
- Installed in the riser tube below the pop up valve of the blast pot
- Used to stop backflow of air into the control lines and valves
- Typically used when blasting with fine or dusty abrasives
- Suits 1" riser tubes
- User will need to reduce current riser tube height to make this fit.
- Allows maximum pressure fluctuation without back flow of dust and abrasive.
- Sold individually
- Genuine Parts - Manufactured by Axxiom Manufacturing/Schmidt
BA2497706- Installed in the riser tube below the pop up valve of the blast pot
- Used to stop backflow of air into the control lines and valves
- Typically used when blasting with fine or dusty abrasives
- Suits 1" riser tubes
- User will need to reduce current riser tube height to make this fit.
- Allows maximum pressure fluctuation without back flow of dust and abrasive.
- Sold individually
- Genuine Parts - Manufactured by Axxiom Manufacturing/Schmidt
-
BA840800079
- Essential Safety Item for Megablaster Pot closures
- Designed and installed on all Schmidt Bulk Pots since release in 2010
- Able to be retrofitted to Schmidt Bulk Pots in any of BlastOne Locations
- Ensures that correct operating procedures are followed when opening the fill port.
- Fits over camlock bolts and ensures all bolts remain in the lugs until all cams are fully disengaged, ensuring that the lid can not blow open
- Genuine Parts - Manufactured by Schmidt - Axxiom Manufacturing
BA840800079- Essential Safety Item for Megablaster Pot closures
- Designed and installed on all Schmidt Bulk Pots since release in 2010
- Able to be retrofitted to Schmidt Bulk Pots in any of BlastOne Locations
- Ensures that correct operating procedures are followed when opening the fill port.
- Fits over camlock bolts and ensures all bolts remain in the lugs until all cams are fully disengaged, ensuring that the lid can not blow open
- Genuine Parts - Manufactured by Schmidt - Axxiom Manufacturing
Explore our extensive range of blast equipment parts designed to enhance and maintain your blasting operations. From deadman control systems to high-pressure fittings, we provide everything you need to keep your equipment running smoothly and efficiently. Our selection includes durable components like hex pipe nipples, pop-up valves, and hose fittings, ensuring compatibility and high performance. Trust in our products to deliver reliability and safety across all your blasting projects.