Blast Equipment Parts
Showing 196–210 of 352 results
-
RUBVD112703BlastOne has the parts needed to keep your VertiDrive equipment running. This is the Relay Module.RUBVD112703BlastOne has the parts needed to keep your VertiDrive equipment running. This is the Relay Module.
-
VC803300082
BlastOne has the parts needed for your MiniBRS G2 Trigger Workheads. This is the Trigger Workhead Cone Liner (MPN 8033-000-82) for both the pneumatic and electric versions.
VC803300082BlastOne has the parts needed for your MiniBRS G2 Trigger Workheads. This is the Trigger Workhead Cone Liner (MPN 8033-000-82) for both the pneumatic and electric versions.
-
RUBVD323003BlastOne has the parts needed to keep your VertiDrive equipment running. This is the V700 Motor Assembly.RUBVD323003BlastOne has the parts needed to keep your VertiDrive equipment running. This is the V700 Motor Assembly.
-
RUBVD313085BlastOne has the parts needed to keep your VertiDrive equipment running. This is the Swingarm Clamp with Shaft, including key for the M7.RUBVD313085BlastOne has the parts needed to keep your VertiDrive equipment running. This is the Swingarm Clamp with Shaft, including key for the M7.
-
RUBVD322009BlastOne has the parts needed to keep your VertiDrive equipment running. This is the WCS with Connector.RUBVD322009BlastOne has the parts needed to keep your VertiDrive equipment running. This is the WCS with Connector.
-
RUBVD322008BlastOne has the parts needed to keep your VertiDrive equipment running. This is the Actuator with Connector.RUBVD322008BlastOne has the parts needed to keep your VertiDrive equipment running. This is the Actuator with Connector.
-
GV2410320SPBV
- Tri-Clover Connector with Built in Ball-Valve
- Locate between the metering valve and the bottom of the pot to reduce maintenance time on the metering valve.
- Combines 2 time savers:
- Tri-Clover connection allows for easy removal of metering valve.
- Ball valve allows for removal of metering valve without emptying the pot.
- 1 1/4" x 1 1/4" NPT Threads - suits most blast pots and abrasive metering valves
- Use thread sealant tape or compound to ensure an airtight connection
- NOTE - this option adds 6 inches in height. Ensure that your pot has the required clearance before ordering, or that you can add the needed height to your existing pot.
GV2410320SPBV- Tri-Clover Connector with Built in Ball-Valve
- Locate between the metering valve and the bottom of the pot to reduce maintenance time on the metering valve.
- Combines 2 time savers:
- Tri-Clover connection allows for easy removal of metering valve.
- Ball valve allows for removal of metering valve without emptying the pot.
- 1 1/4" x 1 1/4" NPT Threads - suits most blast pots and abrasive metering valves
- Use thread sealant tape or compound to ensure an airtight connection
- NOTE - this option adds 6 inches in height. Ensure that your pot has the required clearance before ordering, or that you can add the needed height to your existing pot.
-
GV2410320
- Suits most blast pots and valves (any with 1-1/4" NPT Thread)
- Locate between the metering valve and the bottom of the pot to reduce maintenance time on the metering valve.
- Allows easy removal of metering valve from pot
- Can be used independently, or in conjunction with a Union End Ball valve. To order this combination as a unit, use part number GV2410320SPBV (saves cost).
GV2410320- Suits most blast pots and valves (any with 1-1/4" NPT Thread)
- Locate between the metering valve and the bottom of the pot to reduce maintenance time on the metering valve.
- Allows easy removal of metering valve from pot
- Can be used independently, or in conjunction with a Union End Ball valve. To order this combination as a unit, use part number GV2410320SPBV (saves cost).
-
GV2410320SP
- Suits most blast pots and valves (any with 1-1/4" NPT thread)
- Locate between the metering valve and the bottom of the pot to reduce maintenance on the metering valve
- Allows easy removal of metering valve from pot
- Can be used independently, or in conjunction with a Union End Ball Valve. To order this combination as a unit, use part number GV2410320SPBV (saves cost).
- Alternate version to Tri-clover assembly without spring-loaded hinge
GV2410320SP- Suits most blast pots and valves (any with 1-1/4" NPT thread)
- Locate between the metering valve and the bottom of the pot to reduce maintenance on the metering valve
- Allows easy removal of metering valve from pot
- Can be used independently, or in conjunction with a Union End Ball Valve. To order this combination as a unit, use part number GV2410320SPBV (saves cost).
- Alternate version to Tri-clover assembly without spring-loaded hinge
-
GVFSV1022Heavy-duty pipe fitting connects flat sand valve to pusher line, blast hose line, and blast pot nipple. Specifications:
- 150# malleable iron wye
- 1-¼" x 1-¼" x 1-¼" standard NPT female threads
GVFSV1022Heavy-duty pipe fitting connects flat sand valve to pusher line, blast hose line, and blast pot nipple. Specifications:- 150# malleable iron wye
- 1-¼" x 1-¼" x 1-¼" standard NPT female threads
-
GV214950006
- OEM Replacement Plunger Seal for Large Bore Thompson I, Thompson II, MicroValve II, and MicroValve III valves
- Schmidt / Axxiom part # 2149-500-06
- Note - this product is replacing the purple GV215200006 seal
- Note - this product is also included in the relevant seal kits
GV214950006- OEM Replacement Plunger Seal for Large Bore Thompson I, Thompson II, MicroValve II, and MicroValve III valves
- Schmidt / Axxiom part # 2149-500-06
- Note - this product is replacing the purple GV215200006 seal
- Note - this product is also included in the relevant seal kits
Explore our extensive range of blast equipment parts designed to enhance and maintain your blasting operations. From deadman control systems to high-pressure fittings, we provide everything you need to keep your equipment running smoothly and efficiently. Our selection includes durable components like hex pipe nipples, pop-up valves, and hose fittings, ensuring compatibility and high performance. Trust in our products to deliver reliability and safety across all your blasting projects.